SuperATV WM-K-TRX4 User manual

© 2015 SuperATV.com®. All Rights Reserved. Rev IN-WM-K-TRX4 1/13/2016
Winch Mount
for Kawasaki Teryx4™
INSTALLATION INSTRUCTIONS
Winch not included; shown for illustration only
Item Description
A Side Plate, Right
BFairlead Adapter
C Winch Plate
D Fairlead Mount
E Side Plate, Left
C
B
D
A
E
Thank You
For Choosing
2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427
Read instructions and view illustrations before beginning.
Need help with your installation?
www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
[e-mail]
1-855-743-3427
M8-1.25 x 30mm Lg. FHCS4x M8-1.25 Nylock Nut4x
M10-1.50 x 30mm Lg. FHCS8x M10-1.50 Nylock Nut8x

2IN-WM-K-TRX4
Keep all components removed from machine.
(Passenger Side)
remove (4) Bolts and Plate
remove Bumper
Reference only; do not assemble completely at this time.
(Driver Side)
(Front)
A
C
D
E

3IN-WM-K-TRX4
C
Fig. 1a
(Driver Side)
Fig. 1
3500 lb. Winch:
Install Fairlead Adapter (B) to Fairlead Mount (D) with M8-1.25 x 30mm Lg. FHCS
and M8-1.25 Nylock Nuts. See Fig. 3.
C
stock hardware
Do not tighten hardware completely unless noted.
1.Install Winch Plate (C) to machine with stock hardware. See Figs. 1 - 1a.
2. Install Side Plates (A)(E) to Winch Plate (C) with M10-1.50 x 30mm Lg. FHCS and M10-1.50
Nylock Nuts. See Figs. 2 - 2a.
3. Install Fairlead Mount (D) to Winch Plate (C) with M8-1.25 x 30mm Lg. FHCS and M8-1.25
Nylock Nuts. See Fig. 2b.
4. Install and secure Winch to Mounting Plate (C) using hardware included with Winch.
5. Reinstall Plastic Grill.
6. Install Fairlead (supplied with Winch) using hardware included with Winch.

4IN-WM-K-TRX4
C
(Driver Side)
Fig. 2a
E
Fig. 2
CE
(8) each
A
M10 x 30
M10 Nut
C
D
Fig. 2b
(2) each
M8 Nut
M8 x 30

5IN-WM-K-TRX4
Item Description
A Side Plate, Right
BFairlead Adapter
C Winch Plate
D Fairlead Mount
E Side Plate, Left
PARTS REFERENCE
Use Fairlead Adapter (B) for a 3500 lb. Winch
M8 Nut
M8 x 30
(2) each
D
B
(Front)
Fig. 3
(Driver Side)
install Winch to Winch Plate (C).
Hardware included with Winch.
Tighten all hardware completely and reinstall Bumper
Wire must be installed prior
to mounting Winch.