suprema FaceStation 2 User manual

English
Version 1.0
FaceStation 2
USER GUIDE
www.supremainc.com
EN 102.00.FS2 V1.00A

Safety Instructions
2
Contents
Safety Instructions ..........................................................................................4
Introduction ......................................................................................................6
Components ...................................................................................................................................................6
Name and function of each part ...............................................................................................................7
Cables and connectors ...........................................................................................................................9
Correct face registration and authentication method...........................................................................10
Cautions for registering a face...........................................................................................................10
Cautions for authenticating a face ....................................................................................................10
Admin Menu...................................................................................................11
All Menus .....................................................................................................................................................11
User ................................................................................................................. 12
Registering user information.....................................................................................................................12
Modifying user information.......................................................................................................................14
Delete All Users ..........................................................................................................................................14
View User Usage .........................................................................................................................................14
Authentication ............................................................................................... 15
Auth Mode ...................................................................................................................................................15
Modifying Auth Mode ..........................................................................................................................15
Delete Auth Mode ................................................................................................................................16
Add Auth Mode.....................................................................................................................................16
Operation .....................................................................................................................................................16
Face Recognition .........................................................................................................................................17
T&A Mode ....................................................................................................................................................17
Network .......................................................................................................... 18
Network Settings.........................................................................................................................................18
Ethernet ..................................................................................................................................................18
Wireless...................................................................................................................................................19
Server......................................................................................................................................................19
Serial Settings .............................................................................................................................................20
RS-485 .....................................................................................................................................................20
Display & Sound........................................................................................... 21
Device ............................................................................................................. 22
Interphone....................................................................................................................................................22
Relay .............................................................................................................................................................22
Date & Time ................................................................................................................................................22
Device Info...................................................................................................................................................23
Memory Info ................................................................................................................................................23
USB Memory ................................................................................................................................................23
Restart Device .............................................................................................................................................23
Restore Default............................................................................................................................................23
Factory Default............................................................................................................................................24
Delete the Root Certificate .......................................................................................................................24

Safety Instructions
3
Event Log ....................................................................................................... 25
Search Log ...................................................................................................................................................25
Detail View Log...........................................................................................................................................25
Delete All Logs............................................................................................................................................25
View Log Usage ..........................................................................................................................................26
Troubleshooting ............................................................................................ 27
Checklist before reporting a failure ........................................................................................................27
Product specifications.................................................................................. 28
Dimensions...................................................................................................................................................29
FCC compliance information ...................................................................... 30
EU Declaration of Conformity (CE) ........................................................... 30
Appendices..................................................................................................... 31
Escape clause...............................................................................................................................................31
Copyright notice..........................................................................................................................................31

Safety Instructions
4
Safety Instructions
Observe the following instructions to use the product safely and prevent any risk of injury or property damage.
Warning
Noncompliance with instructions can lead to serious injury or death.
Installation
Do not install the product in a location with direct sunlight, moisture, dust, or soot.
•Fire or electric shock may occur.
Do not install the product in a location with heat from an electric heater.
•Fire or electric shock may occur due to overheating.
Install the product in a dry location.
•Otherwise, product damage or electric shock may occur due to moisture.
Install the product in a location with no electromagnetic interference.
•Otherwise, product damage or electric shock may occur.
The user should not install or repair the product independently.
•Fire, electric shock, or personal injury may occur.
•If the product has been damaged due to independent installation or repair of the product by the user, free A/S service will not be
provided.
Operation
Do not allow liquids such as water, beverages, or chemicals get into the product.
•Fire, electric shock, or product damage may occur.
Caution
Noncompliance of instructions could lead to minor injury or product damage.
Installation
Do not install the power supply cable in a location where people pass by.
•Product damage or physical injury may occur.
Do not install the product near a highly magnetic object such as a magnet, TV, monitor (especially CRT), or speaker.
•Product failure may occur.
Use only a D.C 12 V and 2.5 A or higher power supply adaptor.
•If the proper power supply is not used, the product may not operate properly.
Use a separate power supply for the Secure I/O 2, electric lock, and FaceStation 2, respectively.
•If connecting and using the power supply to these devices together, the devices may malfunction.
Keep the minimum separation distances between the devices when install multiple devices.
•Otherwise, RF performance is affect to the other device, the devices may not operate normally.

Safety Instructions
5
Operation
Do not drop the product or apply an impact to the product.
•Product failure may occur.
Manage the password with care; do not to disclose it to others and change it periodically.
•Otherwise, illegal intrusion may occur.
Do not press the buttons on the product forcibly or using a sharp tool.
•Product failure may occur.
When cleaning the product, wipe the product with a soft and dry cloth. Do not apply water, benzene, or alcohol.
•These may cause product failure.
FaceStation 2 uses a capacitive screen and buttons. If the environment is moist from wet weather, or the product surface is
smeared with a large amount of water, wipe the product off with a dry towel before using it.
RTC battery
Replacing the battery with an incorrect type of battery may cause explosion.
Discard the battery according to appropriate regional or international waste regulations.

Introduction
6
Introduction
Components
•Components may vary according to the installation environment.
•For additional content regarding product installation, visit the Suprema website (www.suprema.co.kr) and view the installation guide.
Note
FaceStation 2
Wall-mount bracket
Fixing screw
(4 EA)
PVC anchor
(4 EA)
Diode
(1 EA)
Connection cable
(2 pins 1 EA, 3 pins 1 EA, 4 pins 4 EA)
Ferrite core
(1 EA)
Drilling template
Quick guide
120Ωresistor
(1 EA)

Introduction
7
Name and function of each part
Name Description
Microphone Delivers the voice of the user when the interphone is connected.
LCD screen Provides UI for operation.
IR camera Captures IR images.
Camera Captures actual images.
RF card authentication
unit
Scans the card for entrance.
Speaker Delivers sound.
USB memory slot Connects USB memory.
Mini USB cable slot Will be supported in the future.
TTL input (4 pins) Connects the TTL input cable.
RS-485 (4 pins) Connects the RS-485 cable.
Relay (3 pins) Connects the relay cable.
Microphone
LCD screen
TTL input (4 pins)
Power supply (2 pins)
Relay (3 pins)
RF card authentication unit
Speaker
Camera
Ethernet
Wiegand input (4 pins)
Wiegand output (4 pins)
RS-485 (4 pins)
IR camera
USB memory slot
Mini USB cable slot

Introduction
8
Power supply (2 pins) Connects the power supply cable.
Ethernet Connects the Ethernet cable.
Wiegand input (4 pins) Connects the Wiegand input cable.
Wiegand output (4 pins) Connects the Wiegand output cable.

Introduction
9
Cables and connectors
Power
Pin Name Color
1
PWR +VDC
Red (white stripe)
2
PWR GND
Black (white stripe)
Relay
Pin Name Color
1
RLY NO
White
2
RLY COM
Blue
3
RLY NC
Orange
RS-485
Pin Name Color
1
485 TRXP
Blue
2
485 TRXN
Yellow
3
485 GND
Black
4
SH GND
Gray
TTL input
Pin Name Color
1
TTL IN0
Red
2
TTL IN1
Yellow
3
TTL GND
Black
4
SH GND
Gray
Wiegand input and output
Pin Name Color
1
WG D0
Green
2
WG D1
White
3
WG GND
Black
4 SH GND Gray

Introduction
10
Correct face registration and authentication method
Cautions for registering a face
•When registering a face, maintain a distance of 40cm to 80cm between the device and the face.
•Be careful not to change the facial expression. (smiling face, drawn face, wink, etc.)
•If you do not follow the instructions on the screen, the face registration may take longer or may fail.
•Be careful not to cover the eyes or eyebrows.
•Do not wear hats, masks, sunglasses or eyeglasses.
•Be careful not to display two faces on the screen. Register one person at a time.
•It is recommended for a user wearing glasses to register both faces with and without glasses.
Cautions for authenticating a face
•Ensure that the face appears inside the guideline displayed on the screen of the device.
•If glasses have been changed, authentication may fail. If the face without glasses has been registered, authenticate the face without
glasses. If only the face with glasses has been registered, authenticate the face with the previously worn glasses again.
•If a part of the face is covered with a hat, a mask, an eye patch, or sunglasses authentication may fail. Do not cover the face; allow the
device to recognize both the eyebrows and the face.