Swegon CONDUCTOR User manual

1
User manual
User manual
CONDUCTOR
LEVEL 1
W1

2
CONDUCTOR
Swegon reserves the right to alter specifications 20090310 www.swegon.com

3
CONDUCTOR
Swegon reserves the right to alter specifications 20090310 www.swegon.com
User manual
About CONDUCTOR
CONDUCTOR is a control system for regulating the room
temperature. You can create a comfortable indoor cli-
mate by keying heating and cooling settings in the room
unit. When you leave the room, the system automatically
regulates the climate until you enter a new temperature
setting.
Set to its automatic mode, the CONDUCTOR will regulate
heating and cooling in response to circumstances in the
room: is anyone in the room, is a window open, is the
room air humid?
These instructions describe how you as day-to-day user
of the CONDUCTOR, office worker or hotel guest, can
regulate the heat and coolness in the room using the
room unit.
The parts of the room unit



Figure 1. The room unit.
1Display
Shows the current status of the climate system and
information about the room temperature. It also shows
the settings you enter with the key set.
2Keyset
You can use it for changing settings of room tempera-
ture.
3 Temperature sensor
Placed inside the enclosure.
N.B.! In that the measurement of the temperature is in-
fluenced by the surroundings, the measurement of the
room temperature, dependent on where the room unit
is located, is not necessarily representative of the actual
heating or cooling requirements of the room.
To use the CONDUCTOR
The following section describes how you use the room
unit to adjust room temperature.
The key set
You use the key set to increase and decrease the desired
room temperature.
1
2
Figure 2. The key set.
1 The keys for adjusting the temperature
▲UP Increase the temperature.
▼DOWN Decrease the temperature.
2Accept key for temperature
OK CONFIRM Confirm the setting.

4
CONDUCTOR
Swegon reserves the right to alter specifications 20090310 www.swegon.com
The Main image
The main image shows the current status and tempera-
ture setting of the climate system.
1
2
3
4
5
Figure 3. The Main image.
1 Current temperature
The field shows present temperature setting. Specified
in ˚C.
2 Heating/cooling
The field shows whether the climate system is set to
heating or cooling.
Heating
Cooling
3 Battery level/window status
The field shows the battery level. If a window is open
in the room this will be visible on the screen.
Good battery status.
Medium good battery status
Change battery! See Service and sup-
port.
Open window.
4Operatingmode
The field shows current operating mode of the climate
system.
N.B.! The field is empty in manual mode.
AUTO Automatic
ECON Economy
STOP Stop
EMERG Emergency
5 Presence status
Someone is in the room.

5
CONDUCTOR
Swegon reserves the right to alter specifications 20090310 www.swegon.com
User manual
To set the desired room temperature
You set the desired room temperature in the main menu,
by pressing any of the following keys: ▲UP or ▼DOWN.
The first press of the key ( ▲UP or ▼DOWN) will take
you to the temperature setting image, without affecting
the temperature setting. You can now set your desired
room temperature.
Figure 4. The temperature setting image.
As in the main menu the desired room temperature is
displayed in ˚C in the middle of the display.
To increase the temperature.
Press ▲UP until the desired room temperature can be
read in the display.
Then press OK CONFIRM to confirm your setting. You
then return to the main menu.
To decrease the temperature
Press ▼DOWN until desired room temperature can be
read in the display.
Then press OK CONFIRM to confirm your setting and
return to the main menu.
Service and support
If the room unit does not operate in a satisfactory
manner, please contact the person(s) responsible for
maintaining the premises (caretaker or receptionist).

6
CONDUCTOR
Swegon reserves the right to alter specifications 20090310 www.swegon.com

7
CONDUCTOR
Swegon reserves the right to alter specifications 20090310 www.swegon.com
User manual
Increase and decrease the room temperature
1 2 3 4
QUICK GUIDE
Press the▲or ▼
key.
Press the ▲key to
increase the tem-
perature.
Press the ▲key to
decrease the tem-
perature.
Press one time for
each degree if you
wish to change the
temperature.
Press theOKkey to
confirm your set-
ting.
You have finished
setting the room
temperature.