Takara Belmont PANDORA User manual

THEMIS series
PANDORA
Ɣ3$1'25$
*)3$1
Thank you for purchasing our product.
Please read through this manual carefully
beforeinstalling or using.
After reading, keep this operation manual
in a safe place for your future reference.
Contents
2SHUDWLRQ,QVWDOODWLRQ0DQXDO
General Safety Instructions
Preparation Before Installation
Parts Lists/Accessory Parts
Installation Procedure
Care and Maintenance
Specification Drawings
6
3
2
4
5
6
Version 2 August 2016

2
ڦBefore use
Please read through the "General Safety Instructions" to ensure you use this product correctly. This instruction
manual contains important information to help avoid personal injury, or property damages to you or your cus-
tomers. All instructions are important for safe operation. Please be sure to observe them.
ŶDefinition of markings
This mark warns the user that "improper use may cause death or severe personal injury".
This mark warns the user that "improper use may cause personal injury or material damages".
CAUTION
This mark indicates that the user need to be ALERT to a possible danger.
This mark indicates what the user MUST DO to prevent accidents.
This mark indicates what the user SHOULD NOT DO.
General Safety Instructions
WARNING
WARNING
Do NOT apply water to the equipment.
The equipment is not waterproofed. Wetting may cause a
fire, electric shock, or insulation failure.
Do NOT alter or modify the equipment.
This may cause electric shock, falling, burnout
damage, or discoloration.
Be alert to the corner of the glass
portion.
Be alert to the corner of the mirror so as not to hit it.
If hit, you may get injured.
Do NOT attempt to repair the unit by
yourself.
Do not attempt to disassemble or repair the equipment
on your own. To do so might cause break down or collapse
accident.Please contact us for repair or servicing instruction.
Follow the direction of caution labels.
If a caution label is attached to the equipment, follow the
directions of the label.
Failure to follow the directions may cause a fire, electric
shock, falling, injury, or breakdown.

3
Preparation before Installation
CAUTION
Do NOT apply weight or Do NOT hit a thing
on the equipment.
Avoid leaning on the glass, hard wiping of the glass
when cleaning.
This may cause deformation, breakage or falling accident
of the product.
Do NOT use the equipment outdoors.
This equipment is neither design for nor approved for
outside installation. If installed outdoors, there may be
a danger of a fire, electric shock, or failure.
Remove chemical immediately after attached.
If chemical such as hair dye, comes in contact with the
equipment, wipe it off immediately.This may cause
discoloration or deterioration.
Use this equipment at an ambient temperature
from 5°C to 35°C, and humidity from 45% to 85%.
When used at high temperature and high humidity, there may
be a risk of burnout damage, failure deformation discoloration.
Confirm the rated voltage and the power supply
voltage of the equipment.
If overvoltage is applied, a fire may start. Applying overvoltage
will shorten the life of the lamp.
Prior to installation, determine the installation position of the product referring to the
specification drawings.
Provide a power supply (AC 230V) on the wall or floor.
z
z
Hold the glass carefully when moving the glass.
When attaching or detatching the glass, hold the glass securely.
If not, failing accident may occur.
zAsk a licensed electrician to perform electrical work.
z
z
Perform Class D grounding (previous Class 3 grounding) with the ground wire.
Confirm the installation directions (up, down, right, left ) of the equipment.

4
Parts List/Accessory Parts
[Accessory parts]
screw x2
Desk unit
Front unit
Glass panel
Power plug
LED switch

Installation Procedure
Position Desk unit in the desired location.
5
Attach Front unit to Desk unit. (Glass panel is hooked on Front unit and included
in same package. Caution should be taken not to be turned upside down.)
Then fix it with 2 screws from inside of doors.
When attaching Front unit to Desk unit, pass Electric cable through
the hole at the bottom of Desk unit.
2
3 Wire the LED switch to Electric cable.
1
Don’t turn upside down
Electric cable

Specification Drawings
6
z
z
z
Rated voltage
Rated frequency
Mass
230V
50/60 Hz
145 kg
1450
860
1100
[mm]
TAKARA BELMONT (UK) LTD.
BELMONT HOUSE, ONE ST.ANDREWS WAY, BOW LONDON
E3 3PA, UK
http:// www.takarahairdressing.co.uk
TEL: [phone]
560
Care and Maintenance
Dust the surface and remove stain.
Wipe the surface with soft and dry cloth. If the stain is hard to remove or oil is spotted,
wipe with cloth soaked in dilluted neutal detergent and wringed.Then wipe it with dry cloth.
Do not use volatile chemical such as thinner, alcohol, gasoline, kerosene, or abrasive, wax,
abrasive sponges and scrubbing brushes, etc.
z
z
z