Takara Belmont BRAMU User manual

Operation Manual
Takara Belmont Barber Chair
Model No. AB-BR
2017.10
BOOK NO.1E05VZBE
Thank you for purchasing this Takara Belmont product.
Carefully read this operation manual to always operate this product properly according to the
instructions herein.
Failure to read this operation manual may lead to accidents.
● Carefully store this operation manual in a secure location near this product where they can
be readily accessed, and refer to them whenever necessary.
● This product is designed for commercial use in barber shops and beauty salons.
Do not use this product for any purposes other than those described above.
Please contact Takara Belmont with the BOOK NO. (outlined below) if this operation manual
becomes torn or damaged and unreadable, or is lost.
Original instruction

Contents
Explanation of Warning Labels ......................................................................... 3
Safety Precautions ........................................................................................... 4
Use Precautions ............................................................................................... 8
Precautions Related to Synthetic (Natural) Leather.......................................... 9
Locations of Warning Labels .......................................................................... 10
Accessories .................................................................................................... 10
Part Names .................................................................................................... 11
Power Supply ................................................................................................. 13
Troubleshooting ............................................................................................. 32
Daily Inspection .............................................................................................. 33
Standard Period of Use .................................................................................. 34
Disposing of this Product ................................................................................ 34
Specifications ................................................................................................. 35
Introduction
Preparation
Rotating the Chair .......................................................................................... 14
Raising/Lowering the Chair ............................................................................ 15
Reclining/Raising the Backrest ....................................................................... 16
Raising/Lowering the Legrest.......................................................................... 18
Moving the Chair to Preset Positions ............................................................. 19
Using the Cape Holder ................................................................................... 24
Using the Dryer/Iron Holder ............................................................................ 25
Using the Service Outlets ............................................................................... 26
Using the Heater ............................................................................................ 27
Accumulator ................................................................................................... 27
Using the Table ............................................................................................... 28
Using the Foot Cushion (AB-BROSF only) ..................................................... 28
Aligning with the Yume Swing Bowl ................................................................ 29
Removing the Step ......................................................................................... 30
How to Use
Care and Maintenance
Cleaning Procedures ...................................................................................... 31
When Necessary
2

Explanation of Warning Labels
3
■Before Use
■About the Precautions Listed Here
Classification of Precautions Level of Harm and Damage, and Degree of Urgency
The following symbols are used to describe specific indications that you must obey.
Prohibited Action Symbol Mandatory Action Symbol
Indicates generally prohibited actions. Indicates actions by general users that
must be performed.
WARNING
CAUTION
Be sure to thoroughly read these precautions related to safety and operate the chair accordingly in a
safe manner.
The precautions continued herein are in order to ensure safe use, and to prevent any injury to users
and other persons, and to prevent any damage.
All these precautions describe important items related to safety. Be sure to always obey all the
precautions contained in this manual.
Takara Belmont has absolutely no responsibility for accidents that might be caused by failure to
obey "Safety Precautions", "Use Precautions" and "Precautions Related to Synthetic (Natural)
Leather" resulting in injury to users and other persons, or other damage. In such cases, the
responsibility of any injury and damage lies solely with the user who fails to obey the "Safety
Precautions", "Use Precautions" and "Precautions Related to Synthetic (Natural) Leather" and
similar precautions.
A detailed explanation of the cautionary symbols is provided below. Be sure that you fully
understand their contents before reading the rest of this manual.
This indicates that failure to obey the corresponding warning and the
resulting improper operation can result in death or serious injury.
This indicates that failure to obey the corresponding warning and
the resulting improper operation can result in mild injury, or
moderate harm and damage.
Indicates that disassembly, repair and
modification are prohibited.
Indicates that the power plug must be
removed from the socket.

Safety Precautions (Must be Obeyed)
4
Power Plug and Cord
Installation/Transport
WARNING
●Do not connect the earth (ground) to the following objects.
• Water pipes
(Complete grounding is not possible as hard plastic pipes are widely used.)
• Gas pipes (Can result in an explosion or fire)
• Lightning rods and telephone dedicated grounding wire (Dangerous during lightning)
●Do not place any objects on top of the power cord.
Damage to the power cord can cause a severed wire or short circuit, resulting in electric
shock or fire.
●Do not plug or unplug with wet hands.
Touching the power plug or outlet with a wet hand can result in electric shock.
●Use a single outlet (do not share an outlet with other plugs).
Be sure to fully insert the power plug into the outlet unitl reaching the base of the plug.
※110V/120V AC(12A or more),220V/230V/240V AC(7A or more).
Using the same outlet together with the power plug of other devices can result in
abnormal heat generation and possible fire.
●Firmly insert the power plug into the outlet.
Be sure to fully insert the power plug into the outlet until reaching the base of the plug.
Failure to fully insert the plug or similar fault can result in a short circuit or heat
generation that causes a fire.
●Hold by the power plug when unplugging.
Do not pull the cord to remove the power plug from the outlet. Hold by the power plug
at the end of the cord when removing. Removing the plug by pulling the power cord can
damage the power cord, resulting in electric shock or fire.
●Be careful of power cord or plug breakage.
Do not use any power cord or plug that is damaged, or that fits loosely when inserted
into an outlet. Doing so can result in electric shock or fire.
●Securely connect to ground.
Failure to make a ground connection can result in electric shock if there is a malfunction
or short circuit.
Consult an electrician for grounding procedures.
●Unplug the power plug when the chair is not in use.
Turn off the power switch and remove the power plug from the outlet when the chair is
not in use.
Unexpected operation can result in an accident or fire from a short circuit due to
insulation aging.
●Installation precautions
•Installation of this chair must be performed by specialized personnel (personnel from
Takara Belmont or Takara Belmont specified representative).
•The chair must be installed on a perfectly flat and solid floor.
Installing the chair to a location with an angle of 5° or more can result in the chair
tipping over.

Safety Precautions (Must be Obeyed)
5
Use and Cleaning Precautions
WARNING
●Be careful to keep hands, fingers and other body parts of the customer and user from
touching or getting close to moving parts.
There is a danger of pinching and other physical injury.
●Do not allow a customer to lie face down on the chair.
Sudden operation of the chair can result in injury.
●Do not stand on the edge of the step.
Doing so could cause the chair to tip over or the step could suddenly move, resulting in
injury or damage.
●Do not sit on the backrest of the chair.
Doing so can result in injury or damage from the chair tipping over.
●Only sit in the area designated for such use.
Never sit on the headrest, armrests, edge of the backrest, legrest, or the step, or subject
these to an excessive (more than necessary) load or force with the backrest reclined.
Doing so can result in injury or damage from the chair tipping over.
●Do not subject the leg or armrests to any excessive load or force.
Doing so can result in injury or damage from the chair tipping over.
●Do not use in an environment where there are electromagnetic interference waves.
Do not install the chair near equipment that generates electromagnetic waves such as
communication equipment and elevators. Do not use devices that generate electromagnetic
waves (such as mobile telephones) near this chair. Doing so can result in faulty operation.
●Do not wash the chair by pouring water on it.
Washing in such a manner can result in a malfunction or electric shock.
●Do not disassemble, repair or modify the chair.
•Disassembly or repair must only be done by a qualified service staff. Disassembly by
yourself can result in an accident, a malfunction, electric shock or fire.
•Never modify this product. Doing so is dangerous.
●Precautions when getting in and out of the chair
Always be sure to lower the chair to the lowest position and lock the rotation when a
customer is getting in or out of the chair. Be especially careful when moving a person in
a wheelchair in and out of the chair, and make sure that the wheelchair is not positioned
in the operating range of the chair when moving the person. Feet, casters or other parts
contacting the UP/DOWN switch will cause sudden operation of the chair, resulting in
injury or damage.
●Precautions regarding customers and children
•Be careful to closely watch customers when using this chair. Be careful that customers
(especially children) do not accidentally cause chair operation due to playing with the
chair or accidental contact, as this can result in an unexpected accident.
•Only allow children near this chair when they are getting their hair cut.
●Precautions when reclining/raising the backrest
•Check that the customer's hands or arms are not between the backrest and seat before
reclining the backrest. There is a danger of pinching and other physical injury.
•Carefully recline the backrest so that the headrest or backrest will not contact any
shampoo bowl or nearby equipment.
•Before raising the backrest, check that the customer's arms or hands are not in between
the backrest and armrests, and operate it safely. There is a danger of pinching and other
physical injury.

Safety Precautions (Must be Obeyed)
6
Use and Cleaning Precautions
WARNING
●Precautions for chair operation and changing the preset positions
•Before operating the chair and during operation, thoroughly check that there are no
bodies or limbs of persons, or possible obstacles in the operating range of the chair
(ranges of seat raising/lowering, backrest reclining/raising, legrest operating directions,
and seat rotation) or nearby. There is a danger of body parts being pinched by the chair,
resulting in injury or damage.
•Check that the customer is seated in the proper position before operating the chair and
closely watch the customer during chair operation.
●Precautions during chair rotation
•Make sure that no persons or objects are nearby before slowly rotating the chair.
•Be sure to always lock (secure) chair rotation after rotating the chair.
•Be careful of the customer when the backrest is reclined and check that the safety of
the customer is ensured before rotating the chair.
•Adjust the adjuster on the backside of the step so that the power cord is not caught or
pulled, and that the chair does not tip over even when stepping on the step.
●Precautions when removing/installing the step
•After installing the step, check that the step fixture is securely held by the guide and
the step is not loose. Be careful that there is no looseness as this could result in the
chair tipping over when the customer is getting in or out of the chair.
•Be careful when lifting and carrying the step, and of where you place it because the
step is heavy. Dropping the step could result in serious injury or damage the floor.
●Precautions for the service outlets
•Be sure to fully insert the power plug of the device being used into the outlet until
reaching the base of the plug. Failure to fully insert the plug or similar loose connec-
tion can result in a short circuit or heat generation that causes a fire.
•If the connection becomes loose, immediately stop using the device plugged into the
service outlet, turn off the device power switch, and remove the power plug from the
outlet.
Also, stop using the chair, turn off the power, unplug the power plug, and contact your
closest dealer or Takara Belmont.
•Remove the power plug of a device from the outlet when not using it.
•If any water gets on a service outlet, immediately turn off the chair power switch,
remove the plug, and wipe away the water. Additionally, if a substantial amount of
water gets inside a service outlet, immediately remove the plug and contact your
closest dealer or Takara Belmont.
•Do not touch a service outlet with a wet hand.
●Precautions when using the heater
•Using the heater for an extended period causes the temperature to increase, possibly
resulting in burns or fire. Be sure to turn off the heater switch when not necessary.
•Turn off the power and remove the power plug if you feel abnormal heat when touch-
ing the legrest, and contact your closest dealer or Takara Belmont.
●Precautions when using the table
Check that the table is securely inserted into the table securing slot before using the
table. Failure to fully insert the table can result in the table falling off, causing injury
and damage.
●Be sure to always perform daily inspection.
Failure to perform daily inspection can result in injury or damage.
Refer to "Daily Inspection" on p. 33.

Safety Precautions (Must be Obeyed)
Use and Cleaning Precautions
Use and Cleaning Precautions
7
WARNING
CAUTION
●Turn off the power switch and unplug the power plug before cleaning.
Failure to do so can result in electric shock or fire. Also, sudden movement of the chair
while cleaning can result in injury.
●Procedures if a power outage occurs
•Turn off the power switch and remove the power plug of this product from the outlet in
order to prevent unexpected operation when recovering from a power outage. Also turn
off the power switches of all devices connected to the service outlet and remove the
power plugs of devices.
•Be extremely careful if there is a power outage when the seat is in a high position as it is
not possible to lower the chair. Assist the customer in getting in and out of the chair in that
position, being very careful that the customer is not injured and the chair does not tip over.
●Do not allow any person whose weight exceeds 135 kg to sit in the chair.
Doing so can cause the chair to tip over or faulty operation.
●Do not strongly strike or scrape the chair.
Doing so can result in tearing of covers and similar damage, and faulty operation.
●Before use, confirm that every part is working normally and safely.
Be constantly careful of and inspect for looseness, rattling, tilting, vibration, noise,
temperature, odors and other possible problems. If you feel that something seems
slightly different or not normal, immediately stop using the chair, turn off the power and
unplug the power plug, and contact your closest dealer or Takara Belmont.
●Always be sure to use your hands to operate the switches.
Always be sure to use your hands to operate the switches except for the foot-operated
UP/DOWN and rotation lock switches. Operating with something other than your hands
can result in damage or faulty operation.
●Be extremely careful not to mistake the switches when operating.
The person operating the chair must pay careful attention to the surrounding area, give
verbal warning, and properly operate the chair.
●Precautions when using the headrest
•Be careful in pulling up the headrest more than necessary because doing so will make
the headrest to come off the chair.
•Be careful not to get water or any chemical on the headrest bar. Wipe off all water and
chemicals immediately if any gets on these parts. Failure to do so can prevent the
headrest from being securely fixed because of corrosion or degradation of friction force
due to rust.
•Be careful when operating the headrest that fingers and other body parts are not
pinched between the area around the operating lever or in between the headrest and
backrest.
●Precautions when using the cape holder
•Be sure to always return it to the stored state when not in use.
•When storing the cape holder, be careful not to pinch the customer's or your own
fingers between it and the armrest.
•The cape holder can withstand a load of 10 N (1 kgf/2.2 lbf). Using the cape holder
with an excessive load can result in damage or injury.

8
Safety Precautions (Must be Obeyed)
Use and Cleaning Precautions
CAUTION
Use Precautions
●Precautions when adjusting the step adjuster
Be careful when the adjuster is extended that it does not scratch the floor or pull the
power cord when rotating the chair.
●Precautions when using the dryer/iron holder
•Be careful that the dryer or iron does not contact the legs or other body parts of the
customer when using the dryer/iron holder.
•The dryer/iron holder can withstand a load of up to 20 N (2 kgf/4.4 lbf). Using the
holder with an excessive load can result in damage or injury.
●Immediately wipe off any chemical solutions or water that spills on the chair.
Water or chemical adhering to a service outlet or control panel can result in faulty
operation or a short circuit.
Immediately turn off the power switch, and wipe off any chemical or water that has
adhered to the product by using a dry soft cloth.
●Precautions for cleaning procedures
The metal and mechanical parts of the chair have sharp edges. Be careful when cleaning
the chair that your hands, fingers or other body parts are not injured.
●Turn off the chair power switch after you are finished using it.
●Immediately wipe off any chemical that spills on the chair.
Immediately wipe off any chemicals adhering to the leather or pump cover.
Failure to do so can result in deformation or discoloration.
●Do not apply heat
Doing so can result in deformation or discoloration.
●Do not place any objects other than persons in the seat.
Other objects can result in deformation or tearing of the leather, or corrosion.
●Recline the backrest at the end of the day
When you have finished working for the day, lower the chair to the lowest position and
completely recline the backrest. This helps to extend the service life of the chair by not applying
a load to springs and cylinders.
●Do not use this chair for any applications other than hairdressing/beauty-related procedures.
This product is designed for commercial use in barber shops and beauty salons.
Only persons who are certified hairdressers or beauticians can be allowed to use this chair.
●Do not use outdoors.
Doing so can result in damage.
●Contact your closest dealer or Takara Belmont if the breaker function (p. 32) frequently operates.
●The maximum load is 1,350 N (135 kgf).
The raising speed of the seat declines as the maximum load is approached.

Use Precautions
9
Precautions Related to Synthetic (Natural) Leather
Rivet Specifications (AB-BROS*M, AB-BROS*A)
Rivet installation for rivet-specification chairs is performed manually and individually for each
chair, thereby possibly resulting in uneven rivet lines, the heads of rivets being sunken or raised,
differences in rivet color, and other differences.
The durability and resistance to wear of rivet color is reduced in comparison with regular rivets
due to an antique-style plating used to enhance the texture, also making rivets easily damaged
such as if scratched by finger nails or other sharp objects, or precious metals (such as rings and
watches).
●Clothing dye adhering
The color of clothing or belts can be transferred to the synthetic leather of this chair by means of
contact. If color adheres to the leather, wipe off the stain as soon as possible before it soaks in by
using a soft cloth that has been dabbed with a neutral detergent diluted with water to approxi-
mately 10%, wipe it with a damp cloth and thoroughly wipe it dry.
●Precautions regarding deformation and color transfer due to contact
•Contact with other plastic parts, painted items, solvents, adhesive tape and similar items can
result in changes in surface luster, cracking, deformation and peeling.
•Contact with newspaper or other printed items can result in color transfer.
•Contact with printed clothing such as t-shirts, jeans and similar items can result in color transfer
such as by dye adhering to the leather.
•Adhering benzene, nail polish remover, alcohol, oil and similar substances can result in discol-
oration, surface dissolution, changes in luster, hardening or softening and peeling.
•Use of bleach, or use of a sheet or other cloth for which bleach has been used can result in
changes in luster and color.
•Placement of an iron, heater or other excessive heat source near the chair can result in deforma-
tion and discoloration.
•Use a curtain or similar item to block the chair from exposure to direct sunlight. Exposure to
direct sunlight can result in surface deformation, shrinking, discoloration, faded colors and
similar problems.
•Placement of a heavy item for an extended period can result in marks or wrinkles that do not
disappear after removing the item.
SAVE THESE INSTRUCTIONS

Locations of Warning Labels
10
•Operation manual (this manual) •Installation manual
•Foot cushion (AB-BROSF only)
•Table
Accessories

Part Names
11
Control panel (Left)
(p. 12)
Control panel (Right)
(p. 12)
Headrest
(With headrest cover)
Backrest
Cape holder
(p. 24)
Armrest
Seat
Step (Removable)
(p. 30)
Headrest operation
lever (p. 16)
Base
Pump cover
Dryer/Iron holder
(p. 25)
Table securing
slots (p. 28)
Legrest
(Apron)
Main Unit
Cape holder
(p. 24)
Step rubber
Foot control
(p. 12)

Part Names
Left Right
12
(2)(3)(4)
(5) (7)
(6)
(8)
(1)
(9)
(1) Legrest heater switch
(2) Preset switch P1
(3) Preset switch P2
(4) Preset switch P3
(5) Legrest switch
(6) UP/DOWN switch
(7) Backrest switch
(8) Auto-return switch
(9) Service outlet
(10) Power switch (Breaker)
(10)
Rotation lock switch
(p. 14)
UP/DOWN switch (p. 15)
Rotation lock switch (p. 14)
■Type Structure Overview AB-BR (1) (2)
(1)
(2)
OS
(One-Stop Paradise)
Legrest-step linked type
Independent legrest type
Yume Swing position setting
Accumulator (Shockless)
Table
Foot cushion
○
Control Panels
Foot Control
(9) (8) (5)(7)
(6)
(2)(3)(4)
F B
○
○
○
○
○
○
○
○

Power Supply
13
The power switch is located on the control panel (right).
Press the side with the
 mark to turn the power on and the side with the ◎mark to turn the power off.
⇒ When the power is turned on with the chair rotation lock released, the chair rotation is locked automatically.
Always operate the power switch by your hands only.
Turning on the power
Inserting the power plug into the outlet
Correctly insert the power plug into an outlet with a ground terminal.
Outlet
(With ground terminal)
OFF (◎mark)
ON ( mark)
WARNING
CAUTION
Power cord
Ground
Power plug
•Be sure to fully insert the power plug into the outlet unitl reaching the base of
the plug.
※110V/120V AC(12A or more),220V/230V/240V AC(7A or more).
Do not share use of the outlet with any other electrical device.
•Be sure to fully insert the power plug into the outlet until reaching the base of
the plug.
•Do not pull the cord to remove the power plug from the outlet. Hold by the
power plug at the end of the cord when removing.
•Do not touch a power plug or outlet with a wet hand.
•Do not connect the earth (ground) to the following objects.
Water or gas pipes, lightning rods and telephone dedicated grounding wire
•Consult an electrician for grounding procedures to ensure secure ground
connections.
•Turn off the power switch and remove the power plug from the outlet when
the chair is not in use.
Power plug
Ground
Power cord

Rotating the Chair
14
Backrest
Armrest
Hold the backrest or armrests when rotating the chair.
(You can rotate the chair a full 360°.)
⇒When the chair rotation lock is released, you can perform the following procedures to lock rotation.
•Turn on the power switch.
•Press the switches on the foot control and control panel (except for the legrest heater switch).
Step on the rotation lock switch when locked to release the lock and enable rotation of the chair.
The rotation lock repeatedly switches between locked and released each time that the rotation lock
switch is stepped on.
Rotation lock switch
Foot control
WARNING
•Always be sure to lower the chair to the lowest position and lock the rotation
when a customer is getting in or out of the chair.
•Be careful of the following when rotating the chair in order to ensure safety.
→Lower the chair to the lowest position.
→Do not rotate the chair until the customer has completely sat down in the chair.
→Always be sure that no other persons are in the surrounding area before
rotating the chair, and rotate so that the step and other parts do not contact
the customer or any nearby equipment.
•Always be sure to lock the chair when not rotating it.

Raising/Lowering the Chair
15
⇒If the chair rotation lock is released, the chair rotation is locked automatically when you press
the switch.
You can raise and lower the chair by operating either of the switches.
The chair moves up and down while a switch is pressed.
Support arm
UP/DOWN switch (Up)
Foot control
UP/DOWN switch
Control panel (Right)
UP/DOWN switch
Control panel (Left)
UP/DOWN switch (Down)
WARNING
•Before raising or lowering the chair, check that there are no body parts
(especially hands or legs) or objects near the chair or step, or in the gap of
the support arm.
•This chair moves backwards as it is raised and forward as it is lowered.
Thoroughly check that there are no obstacles in front of or behind the chair.

Reclining/Raising the Backrest
16
Pulling out the headrest
Headrest
operation lever
Handle
Press the
headrest
operation
lever.
(1)
(2)
CAUTION
Press the
headrest
operation
lever.
Headrest bar
Use the headrest when supporting the customer's head is needed, such as for shaving.
Tip the headrest forward to fit it against the customer's head so that the customer will be more
comfortable even if used for an extended period. Do not use the headrest if it is not needed, such
as for back shampooing.
1Lift up the handle and pull up the headrest.
Remove your hand at the desired position to lock
the headrest there.
If the headrest is pulled too far up, return it while
pressing the headrest operation lever.
* If the headrest comes off the chair body, press
and hold the headrest operation lever while
inserting back the headrest bar.
2While pressing the headrest operation
lever, tip the headrest forward.
The headrest can be fixed at 90 degrees.
Push the headrest over so it is at 90 degrees and
release the headrest operation lever.
3Store the headrest when finished using it.
(1) While holding the handle and pressing the
headrest operation lever, return the headrest to
its original angle.
(2) Lower the headrest.
•Do not apply excessive force to the headrest or strike it from above when it is pulled out. Doing
so can result in damage.
•Be sure to always store the headrest when performing a back shampooing. Otherwise, the
shampoo bowl will interfere with the headrest possibly resulting in breakage.
•To store the headrest, return the pressed-forward headrest to its original angle before lowering the headrest.
Failure to return it to its original angle before lowering it can result in a strong force being applied
to the leather of the backrest and corresponding damage to the leather.
•Be careful in pulling up the headrest more than necessary because doing so
will make the headrest to come off the chair.
•Be careful not to get water or any chemical on the headrest bar.
Wipe off all water and chemicals immediately if any gets on these parts.
Failure to do so can prevent the headrest from being securely fixed because of
corrosion or degradation of friction force due to rust.
•Be careful when operating the headrest that fingers and other body parts are
not pinched between the area around the operating lever or in between the
headrest and backrest.

17
Reclining/Raising the Backrest
⇒If the chair rotation lock is released, the chair rotation is locked automatically when you press
the switch.
You can raise and recline the backrest by operating either of the switches.
The backrest rises or declines while the switch is pressed.
Backrest switch
Control panel (Right)
Backrest switch
Control panel (Left)
When you recline the backrest without using the headrest, support the customer's head with your
hand so that the customer will not contact with the shampoo bowl.
WARNING
•Check that the customer's hands or arms are not between the backrest and
seat before reclining the backrest.
•Carefully recline the backrest so that the headrest or backrest will not contact
any shampoo bowl or nearby equipment.
•Before raising the backrest, check that the customer's arms or hands are not
in between the backrest and armrests, and operate it safely.

•Before raising the legrest (step), be very careful that the step or the
customer's feet will not contact any nearby devices, and operate it safely.
•Before lowering the legrest (step), make sure that no persons or objects are
under the legrest (step), and operate it safely.
Raising/Lowering the Legrest
18
⇒If the chair rotation lock is released, the chair rotation is locked automatically when you press
the switch.
Legrest-step linked type Independent legrest type
You can raise and lower the legrest by operating either of the switches.
The legrest moves up and down while a switch is pressed.
The legrest of legrest-step linked type rises and lowers together with the step.
Legrest switch
Control panel (Right)
Legrest switch
Control panel (Left)
WARNING

The chair can be moved to the preset positions for chair height, backrest angle and legrest position.
The legrest of legrest-step linked type rises and lowers together with the step.
* Pull the headrest out to the desired position beforehand if you need to use it.
⇒If the chair rotation lock is released, the chair rotation is locked automatically when you press
the switch.
Moving the Chair to Preset Positions
Preset Function
Pressing the switch just once moves the chair to a preset position.
You can set up to three optional positions of this chair.
19
Using the preset function
Preset switches (P1 to P3)
Control panel (Right)
Preset switches (P1 to P3)
Control panel (Left)
Legrest-step linked type Independent legrest type

Press any of the switches of the foot control or control panel (except for the legrest heater switch)
if you want to suspend preset/auto-return operation.
(An electronic beep is emitted when the auto-return operation is stopped (canceled).)
20
Before using the preset or auto-return functions, check that there are no body
parts (especially hands or legs) or objects near the chair or step, or in the gap
of the support arm.
⇒If the chair rotation lock is released, the chair rotation is locked automatically when you press
the switch.
Moving the Chair to Preset Positions
Using the auto-return function
Canceling an operation
The chair height, backrest angle and legrest position return to the position for getting in/out of chair.
(An electronic "pough" sound is emitted to notify you that operation is starting.)
Auto-return switch
Control panel (Right)
Auto-return switch
Control panel (Left)
WARNING