TANDBERG 150 MXP User manual

D13651.05 Page 1
Installation
Connecting Cables
1. LAN 1: Connect LAN 1 to PC.
2. LAN 2: Connect LAN 2 to ethernet. The PC gets ethernet connection through the TANDBERG 150.
3. Power: Power on the system with the power cable.
4. Plug for handset: Optional feature, see www.tandberg.net for more information.
5. Plug for headset: Optional feature, see www.tandberg.net for more information.
The system lies fully assembled in the box.To protect the camera lens while installing, it is
recommended to keep the camera lens cap on.
In the accessories box you find: - LAN cable
- Power adapter and power cable
5
3
PC
2
1
Ethernet
4
150

D13651.05 Page 2
System Configuration
1. Open the General Settings menu
Press the Settings key on the keypad to open the Administrator Settings menu
and select ‘General’.
2. General configuration
Configure System Name, Autoanswer and Maximum Call Length (in minutes). Note that ‘0’ means
that there is no maximum call length.
3. Save changes
Remember to save changes by selecting the Save button at the bottom of the menu and
pressing OK.
Please read the user manual for further details.
1. Open the Network Settings menu
Press the Settings key on the keypad to open the Administrator Settings menu
and select ‘Network’.
2. IP configuration
Open ‘IP Settings’. Configure IP Settings and press ‘Save’.
3. H.323 configuration
Open ‘H.323 Settings’. Configure H.323 Settings and press ‘Save’.
Please read the user manual for further details.
Network Configuration