TANDBERG 880 MXP Instruction Manual

1
Basic Use guidelines
TANDBERG 880 MXP System

2
Installing TANDBERG 880 MXP
Comes in 1 box
–Videoconferencing System with built-in Camera
–Power s upply
–Table Microphone
–Remote Control with Batteries
–User manual on CD
–Cables

3
TANDBERG 880 MXP Network types
RS 232
Dataport
LAN
ISDN 1-2-3-4
DC power
PC card slot
Power On/Off
USB Port

4
TANDBERG 880 MXP Video Input & Output
Video In 3
Doc cam
/Aux
Video In 2
Doc cam
/Aux
VGA-DVI In
Video Out
1 Main
Monitor
SVHS
Video Out
2 Main
Monitor
Composite
Video Out
3 Dual
Monitor
Composite
VGA-DVI Out
Video In 4
VCR

5
TANDBERG 880 MXP Audio Input & Output
Audio In 1-2
(microphone)
Audio In
4 VCR
Audio In
3 Aux
Audio Out
2 VCR
Audio Out 1
Main Monitor

6
Welcome Screen / Main-Menu
When not in a
call this
“image”is
local video or
your own
welcome logo

7
Important Buttons!
OK / Menu
-Access the menu
-Choose/ affirm options
Cancel
-Back out of menus
-Cancel actions

8
Placing Video Calls
The bottom portion of the remote is (first)
a dialing pad
If H.320 ISDN: Dial Area Code + number, then
Press ‘Connect’
If ISDN International: Dial 001 + County Code
+ Area Code + number, then Press ‘Connect’
* ‘Cancel’ is use as backspace
If IP / H.323...
Dial IP address or E.164 alias
extension and then Press ‘Connect’

9
Video Calls : Settings
When you place video call you can simply let the powerful
TANDBERG ICM (Intelligent Call Management) set call-
parameters automatically, Including:
the call type (Video,Audio/telephone),
the default call speed (Bandwidth),
the network to be used (ISDN or IP) and
(when ‘dialing’) whether or not the call
must be Restricted from 64-to-56 Kbps, or you
can adjust these by accessing the advanced Call
Settings

10
Call Settings : MXP
Press “Connect” then arrow
over to Default Call Settings
and select “OK”