Taurus V BENCH LEG CURL IT95 User manual

Owner‘s Manual
TF-IT9521
V BENCH LEG CURL IT95
TAURUS® is a registered brand of the company Sport-Tiedje GmbH.
All rights reserved. Any use of this trademark without the explicit written permission of Sport-Tiedje is prohibited.

Table Of Contents
CAUTION!
Read all precautions and instructions in this manual before using this equipment.
Please assemble according to the actual Weights you buy !
Important Safety Instructions----------------------------------------------------------- 3
Instructions-------------------------------------------------------------------------------- 5
Exploded View and Parts List------------------------------------------------------------ 6
Measurement Guide--------------------------------------------------------------------- 16
Assembly Instructions------------------------------------------------------------------ 17
Assembly--------------------------------------------------------------------------------- 18
Adjust Instructions---------------------------------------------------------------------- 32
Exercise Instructions-------------------------------------------------------------------- 33
Maintenance Schedule------------------------------------------------------------------ 34
General Maintenance Information----------------------------------------------------- 35
Weight Training Tips-------------------------------------------------------------------- 36

3
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete physical
examination from your physician. When using exercise equipment, basic
precautions should always be taken, including the following:
1. Read all instructions before using the equipment.
These instructions are written to ensure your safety and to protect the unit.
2. Use the equipment only for its intended purpose as described in this guide.
Do not use accessory attachments that are not recommended by the
manufacturer: such attachments might cause injuries.
3. The product should only be used on a level surface and is with 0.5 meters
space around the product.
Do not use the equipment outdoors.
4. Do not allow children on or near the equipment. And children are not allowed
to use this equipment.
Teenagers should use this equipment with adult supervision.
5. Do not overexert yourself or work to exhaustion.
Do not attempt to lift more weight than you can control safely.
If you feel any pain or abnormal symptoms, stop your workout immediately
and consult your physician.
6. This equipment is not used as medical apparatus and instruments.
7. Never operate the unit when it has been dropped or damaged.
Never drop or insert anything into any opening in the equipment.
Always check the unit and its cables before each use. Make sure that all
fasteners and cables are secure and in good working condition.
Frayed or worn cables can be dangerous and may cause injury. Periodically
check these cables for any indication of wear.
Keep hands, limbs, loose clothing and long hair well out of the way of moving
parts.
8. Be careful when getting on or off the equipment.
9. Wear proper exercise clothing and shoes for your workout, no loose clothing.

Specifications
Class: S
Maximum Wt. Capacity: 134kg/ 295lbs
Maximum User Weight: 150kg/ 330lbs
Product Total Surface: 1155*1470mm
Product Total Mass: 131.5kg/ 290lbs
Training Area and Free Area
4
Important Safety Instructions
Personal Safety During Assembly
Read each step in the assembly instructions and follow the steps in sequence.
Do not skip ahead. If you skip ahead, you may learn later that you have to
disassemble components and that you may have damaged the equipment.
Assemble and operate the equipment on a solid, level surface. Locate the unit
a few feet from walls or furniture to provide easy access. The equipment is
designed for your enjoyment. By following these precautions and using
common sense, you will have many safe and pleasurable hours of healthful
exercise with the equipment.

5
Instructions
Tools Required
The equipment is designed to provide the smoothest, most effective exercise
motion possible. After assembly, you should check all functions to ensure correct
operation. If you experience problems, first recheck the assembly instructions to
locate any possible errors made during assembly. If you are unable to correct the
problem, call your authorized dealer. Be sure to have your serial number and this
manual when calling. When all parts have been accounted for, continue on.
Ratchet Wrench and Socket
Adjustable Wrench
Rubber Mallet
Hex Key Wrench Set
Phillips Screwdriver
Before beginning assembly please take the time to read instructions thoroughly.
Please use the various lists in this manual to make sure that all parts have been
included in your shipment. When ordering, use part number and description from
the lists. Use only our replacement part when servicing. Failure to do so will void
your warranty and could result in personal injury.

6
Exploded View and Parts List
Overall
Item No. Grade No. Part No. Description QTY
1 1 IT952101ASSY Weight Stack Frame ASSY 1
2 2 IT952102ASSY Main Frame ASSY 1
3 3 IT95170300 Bottom Cross Brace 1
4 4 IT952104ASSY Front Support Frame ASSY 1
5 5 IT950505ASSY FOAM Frame ASSY 1
6 6 IT952106ASSY Swing Frame ASSY 1
7 7 IT952107ASSY Wheel Frame ASSY 1
8 8 IT952108ASSY Handle Frame ASSY 1
9 9 IT95210900 Support Frame 1
10 10 IT95211000 Seat Pad Ⅱ1
11 11 IT95191400 Seat Pad 1
12 12 IT95211100 Cable ASSY 1
13 13 IE95052800 FOAM ASSY 1
14 14 IT950121ASSY Top Bracket ASSY 1
15 15 IT950122ASSY Bottom Bracket ASSY 2
16 16 IT95012300 Rear Bracket 1
17 17 IT95014200 Top Plate 1
18 18 IT95014400 Guide Rod φ19*1242 2
19 19 IT95015100 Top Cover 1
20 20 IT95015200 Training Placard Cover 1
21 21 IT95055400 Left Front Shroud 1
22 22 IT95085400 Right Front Shroud 1
23 23 IT95015500 Top Rear Shroud 1
24 24 IT95015600 Rear Shroud 1
25 25 IT95016000 Plastic Cover 3
26 26 IT95016100 Guide Rod Fixing Sleeveφ25*φ19*45 2
27 27 IT95016500 Spout Plug φ16.5*6.88 2
28 28 IT90012000V1 Selector Pin W/Coil 1
29 29 IT80023000 Weight Rubber Bumper 2
30 30 IT801210300P11C Cup Holder 1
31 31 FE97211900 Cap φ60 2
32 32 FE97212000 Circle Ring φ62.5*5 1

7
Exploded View and Parts List
Overall
Item No. Grade No. Part No. Description QTY
33 33 IT95062000 Cap ASSY 1
34 34 IE950912800 Plastic Ring 1
35 35 CWRVL0101100 Plate 1
36 36 SG500110400V5 4.5" Pulley 3
37 37 SD1000B3000ASSY Adjustable Foot Plate 2
38 38 HFOPT900-04A0602 Spring 2
39 39 HFOPT900-04A1400 Aluminium Sheath 1
40 40 V22500 Plug 1
41 41 GB70BTM12*135DN18 Socket Head Cap Screw M12*135 6
42 42 GB70BTM12*30DN18 Socket Head Cap Screw M12*30 2
43 43 GB70BTM10*80DN18 Socket Head Cap Screw M10*80 4
44 44 GB70BTM10*75DN18 Socket Head Cap Screw M10*75 4
45 45 GB70BTM10*50DN18 Socket Head Cap Screw M10*50 3
46 46 GB70BTM10*45DN18 Socket Head Cap Screw M10*45 2
47 47 GB70BTM10*25DN18 Socket Head Cap Screw M10*25 9
48 48 GB70BTM10*130DN18 Socket Head Cap Screw M10*130 2
49 49 GB70M8*20N19 Socket Head Cap Screw M8*20 2
50 50 CNLM10*25DS20 Flat Head Cap Screw M10*25 2
51 51 GB818M6*20DHS2 Cross Recessed Pan Head Screw M6*20 18
52 52 GB818M6*16DHS2 Cross Recessed Pan Head Screw M6*16 4
53 53 GB818M6*10DHS2 Cross Recessed Pan Head Screw M6*10 4
54 54 NM10DN2 Nylon Lock Nut M10 13
55 55 GB9512DN2 Flat Washer φ13*φ24*2.5 8
56 56 GB9510DN2 Flat Washer φ11*φ20*2 34
57 57 GB958DN2 Flat Washer φ9*φ16*1.6 2
58 58 GB9310N19 Spring Washerφ10 2
59 59 GB894.125FH12 Circlips For Shaft 1
60 60 NBS6DHS Hex Key S=6 1
61 61 NBS8DHS Hex Key S=8 1
62 62 LW200BS Wrench φ6*117 1
63 63 YHY Lube 1

8
Exploded View and Parts List
Overall

9
Exploded View and Parts List
Weight Stack Frame ASSY
Item No. Grade No. Part No. Description QTY
1 1.1 IT95210100 Weight Stack Frame 1
2 1.2 IT95015700 Foot Plate 2
3 1.3 IT95015800 Plug φ95*81.1 2
4 1.4 IT95015900 Plastic Block 2
5 1.5 GB17880.5M6*16.5DS17 Rivet Nut M6 14
6 1.6 AC32705800 U-nut M6 4
7 1.7 GB818M6*20DHS2 Cross Recessed Pan Head Screw M6*20 2

10
Exploded View and Parts List
Main Frame ASSY
Item No. Grade No. Part No. Description QTY
1 2.1 IT95210200 Main Frame 1
2 2.2 IT90013800P11C Plug RT50*100 3

11
Exploded View and Parts List
Front Support Frame ASSY
Item No. Grade No. Part No. Description QTY
1 4.1 IT95210400 Front Support Frame 1
2 4.2 IT95016400 Pulley Cover 3
3 4.3 IT90013800P11C Plug RT50*100 2
4 4.4 FE97122100 Pulley Spacer 1 1
5 4.5 FE97122300 Threaded Cloumn 1
6 4.6 IT95057800 Thin 4.5" Pulley 1
7 4.7 SG500110400V5 4.5" Pulley 1
8 4.8 GB70BTM10*50DN18 Socket Head Cap Screw M10*50 1
9 4.9 GB70BTM10*25DN18 Socket Head Cap Screw M10*25 1
10 4.10 NM10DN2 Nylon Lock Nut M10 1
11 4.11 DQ10N19B Flat Washerφ11*φ25*2 1

12
Exploded View and Parts List
FOAM Frame ASSY
Item No. Grade No. Part No. Description QTY
1 5.1 IT95050500 FOAM Frame 1
2 5.2 IT95221700 Pin 1

13
Exploded View and Parts List
Swing Frame ASSY
Item No. Grade No. Part No. Description QTY
1 6.1 IT95210600 Swing Frame 1
2 6.2 IT950521ASSY Long Pin 1
3 6.3 IT95052200 Lining Board 1 1
4 6.4 IT95121200 Counter Poise Block 1
5 6.5 IN-S10111200 Rubber Sleeve φ17*10.5 2
6 6.6 M02502000 Spacerφ38*φ32*φ25.4*18 2
7 6.7 GB2766006-2ZNBK Bearing 2
8 6.8 GB70M8*20DN20 Socket Head Cap Screw M8*20 2
9 6.9 PNLM8*25DN20 Button Head Cap Screw M8*25 2
10 6.10 NM8DN2 Nylon Lock Nut M8 2
11 6.11 GB958DN2 Flat Washer φ9*φ16*1.6 4
12 6.12 GB938N19 Spring Washer φ8 2

14
Exploded View and Parts List
Wheel Frame ASSY
Item No. Grade No. Part No. Description QTY
1 7.1 IT95210700 Wheel Frame 1
2 7.2 IT95052300 Lining Board 2 1
3 7.3 FE97213100 Square Rubber Sleeve 1
4 7.4 GB2766006-2ZNBK Bearing 2
5 7.5 IN-S10111200 Rubber Sleeve φ17*10.5 2
6 7.6 GB70M8*20DN20 Socket Head Cap Screw M8*20 2
7 7.7 NM8DN2 Nylon Lock Nut M8 2
8 7.8 GB958DN2 Flat Washer φ9*φ16*1.6 2

15
Exploded View and Parts List
Handle Frame ASSY
Item No. Grade No. Part No. Description QTY
1 8.1 IT95210800 Handle Frame 1
2 8.2 V39600 Aluminum Grip Cap 2
3 8.3 026-01PL0206-12 Grip 2
4 8.4 V39500 Aluminum Grip Ring 2
5 8.5 YZGB7710-32*3.2N19 Socket Set Screw 10-32UNF*3.2 8

Inches
Millimeters
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
FHCS = Flat Head Cap Screw
HHB = Hex Head Bolt
Measurement Guide
Diameter of bolt
(mm/inch) M6(1/4") M8(5/16") M10(3/8") M12(1/2") M16(5/8")
Tightening
torque (N.m) 9~12 22~30 45~59 78~104 193~257
Operational
methods for
adult men
The strength of
the wrist
The strength of
the wrist and
forearm
The strength of
the entire arm
The strength of
the arm and
upper body
with all strength
16
CRPHS = Cross Recessed Pan
Head Screw

17
Assembly Instructions
Assembly of the equipment takes professional installers about 2 hours. If this
is the first time you have assembled this type of equipment, plan to spend
more time. It is strongly recommended to assemble the equipment by
professional installers. You may find it quicker, safer, easier to assemble this
equipment with the help of a friend, as some of components may be large,
heavy or awkward to handle alone. It is important that you assemble your
product in a clean, clear, uncluttered area. This will enable you to move around
the product while you are fitting components and reduce the possibility of
injury during assembly.
As with any assembled part, proper alignment and adjustment is critical. While
tightening the fasteners, be sure to leave room for adjustments. Do not fully
tighten the fasteners until instructed to do so. Be careful to assemble the
components in the sequence presented in this guide.
NOTE

STEP 1
1. Attach two Adjustable Foot Plates (#37) to the Main Frame ASSY (#2).
2. Attach the Rear Bracket (#16) to the Top Rear Shroud (#23) using:
two M6*10 CRPHS (#53)
Note: Wrench Tighten Bolts.
Assembly
18

Assembly
19
STEP 2
1. Attach the Front Support Frame ASSY (#4) and the Bottom Cross Brace (#3) to the Main
Frame ASSY (#2) using:
three Plastic Cover (#25)
six M12*135 SHCS (#41)
six Φ13*Φ24*2.5 Flat Washer (#55)
2. Attach the Wheel Frame ASSY (#7) and the Support Frame (#9) to the Front Support
Frame ASSY (#4) using:
two M10*45 SHCS (#46)
two Φ11*Φ20*2 Flat Washer (#56)
two Φ10 Spring Washer (#58)
Note: 1. Wrench Tighten Bolts and Nylon Lock Nuts.
2. Adjust the Adjustable Foot Plates to make the machines stable.

STEP 3
1. Attach the Front Support Frame ASSY (#4), the Bottom Cross Brace (#3) and the Support
Frame (#9) to the Weight Stack Frame ASSY (#1) using:
four M10*80 SHCS (#43) two M12*30 SHCS (#42)
four M10 Nylon Lock Nut (#54) eight Φ11*Φ20*2 Flat Washer (#56)
two Φ13*Φ24*2.5 Flat Washer (#55)
2. Attach one 4.5" Pulleys (#36) to the Weight Stack Frame ASSY (#1) using:
one M10*50 SHCS (#45) two Φ11*Φ20*2 Flat Washer (#56)
one M10 Nylon Lock Nut (#54)
3. Attach the Top Bracket ASSY (#14) and two Bottom Bracket ASSY (#15) to the Weight
Stack Frame ASSY (#1) using:
two M8*20 SHCS (#49) two Φ9*Φ16*1.6 Flat Washer (#57)
two M10*75 SHCS (#44) four Φ11*Φ20*2 Flat Washer (#56)
two M10 Nylon Lock Nut (#54)
Note: Wrench Tighten Bolts and Nylon Lock Nuts.
STEP 4
1. Attach the Swing Frame ASSY (#6) to the Front Support Frame ASSY (#4) using:
one Cap Φ60 (#31) one Circle Ring Φ62.5*5 (#32)
one M10*25 SHCS (#47)
2. Attach the FOAM Frame ASSY (#5) to the Swing Frame ASSY (#6) using:
one Circlips For Shaft (#59) one Cap ASSY (#33)
one M10*25 SHCS (#47)
3. Attach the Plate (#35) and Adjustable Handle Frame ASSY (#8) to the Main Frame ASSY
(#2) using:
two M10*130 SHCS (#48) two M10*25 SHCS (#47)
two M10*25 FHCS (#50) four M10 Nylon Lock Nut (#54)
eight Φ11*Φ20*2 Flat Washer (#56)
Note: 1. Wrench tighten bolts and Nylon Lock Nuts.
2. Pay attention to the relative location between the Wheel Frame ASSY
(#7) and the Swing Frame ASSY (#6).
Assembly
20