Teknion interpret CHICAGO POWER MODULE DOUBLE SIDED... User manual

Chicago Power Module - Double Sided Frame (WWEPMCH), Power Tray
(WWEPTD)
Part and Product Identification
For Customer Support please contact
[email protected]
Section:
Description: Page No:
Date:
Rev. No: 1
Feb. 2017 1 of 4
INT_408a
interpret
A1 - WWD Electrics Bracket, Back
(MPA25-E083) x 2
A2 - WWD Electrics Bracket,
Front
(MPA25-E082) x 2
B - Chicago Power Module
(WWEPMCH) x 1
C - 1/4 - 20 x 15 mm, Zinc
Murakoshi Screw
(E01-0635) x 8
D - 8-32 3
4" Pan Head Quad
Machine Screw
(FS8-32X0.75QRZ) x 2
E - 8 x 1
2" RND, ROB, Zinc type B
(FS8 x 1.2-RRB) x 4
F - Interpret Double Sided Power
Tray (WWEPTD) x 2
NOTE: Please refer to
Installation Guide No. INT_401a
for information on Power Tray.
A1
A2
B
F

Section:
Description: Page No:
Date:
DISASSEMBLE BRACKET SCREW LOCATIONS
INT_408a
2 of 4
Feb. 2017
interpret
NOTE: Installer to disassemble Bracket
A2
A2
A1
E
D
E

Section:
Description: Page No:
Date:
HOOK BRACKETS TO BEAM ATTACH POWER MODULE TO BRACKETS
INT_408a
3 of 4
Feb. 2017
interpret
STEP 2: Attach Power Module to Brackets and fasten with screws provided. Adjust locations
of Brackets so that the bottom hole lines up with the hole of Module.
STEP 1: Connect Electrics Bracket to Transverse Beam. A1 and A2 must be joined offset and
then slide sideways to interlock together.
A2
A1
A2
A2
D
D
B
B
A
D

Section:
Description: Page No:
Date:
POWER TRAY INSTALL
Feb. 2017 4 of 4
INT_408a
interpret
STEP 3: Align Power Tray to Electrics Bracket as illustrated. Fasten using screws provided.
NOTE: Please refer to
Installation Guide No. INT_401a
for information on Power Tray.
A
BF
C
F
A
B