Teknion transit Operating and maintenance instructions

Fixed Height Mount Bracket (HWB), End Gable (HEG) Part and Product Identification
A1 - Thin Panel
Mounting Bracket
(A15-5489) x2
Section:
Description: Page No:
Date:
Rev. No: 1
FIXED HEIGHT MOUNT BRACKET & END GABLE
WORKSURFACE SUPPORTS AND ACCESSORIES
May 2018 1 of 8
TST_267
transit Installation Guides
Without Infill Panel With Infill Panel
HEG
HWB
A - Fixed Height Panel
Mounting Brkt.
(HWB) x1
A3 - #10x0.875" LG.
Screw, Quad Pan
Washer
(E07-0077) x8
B - End Gable (HEG) x1
B1 - Thin Panel Mounting Bracket
(A15-5489) x1
B2 - 1/4-20x3/4" Mach.
Screw, Quad Truss
(E01-2010) x10
B3 - #10x0.875" LG.
Screw, Quad Pan
Washer
(E07-0077) x14
B4 - End Gable with Inserts
(N09-0836) x1
B5 - Infill, Flush End Gable
(A15-5492) x1
B6 - End Gable Bumper
(D06-4027) x1
B7 - End Gable Tether
(A15-5490) x1
B8 - Leg Leveler
(N09-0308) x1
B9 - Foam Tape
(E08-0092) x1
B4
A1, B1
B7

STEP 2: Assemble End Gable by using Leveler and End Bumper.STEP 1: Install Mounting Bracket by engaging it onto the Transit Frame.
Section:
Description: Page No:
Date:
INSTALL MOUNTING BRACKET ASSEMBLE END GABLE
TST_267
2 of 8
May 2018
FIXED HEIGHT MOUNT BRACKET & END GABLE
WORKSURFACE SUPPORTS AND ACCESSORIES
transit Installation Guides
A1, B1
B4
B6
B8

STEP 4: Drop Worksurface and Fasten to Fixed Height Mounting Bracket with one Screw.
NOTE: Further adjustment is required, so Fasten only one Screw.
STEP 3: Install the End Gable Assembly in place by loose tightening the Screws.
Section:
Description: Page No:
Date:
INSTALL END GABLE ASSEMBLY INSTALL WORKSURFACE
TST_267
3 of 8
May 2018
FIXED HEIGHT MOUNT BRACKET & END GABLE
WORKSURFACE SUPPORTS AND ACCESSORIES
transit Installation Guides
B7
B2
A2, B2
B2

STEP 6: Fasten one screw at the Front and leave Loose.STEP 5: Level the assembly to make sure the Worksurface and Panel are at right position.
Inside Corners must be squared.
Section:
Description: Page No:
Date:
LEVEL ASSEMBLY FASTEN FRONT SCREW
TST_267
4 of 8
May 2018
FIXED HEIGHT MOUNT BRACKET & END GABLE
WORKSURFACE SUPPORTS AND ACCESSORIES
transit Installation Guides
B2

STEP 8: Fasten End Gable and Fixed Height Mounting Bracket to the Worksurface by using
Wood Screws provided.
STEP 7: Push End Gable against the Panel and tighten screws of End Gable Tether to bottom
rail of Lyft Panel.
NOTE: Ensure End Gable Weldment is square.
Section:
Description: Page No:
Date:
SECURE END GABLE SECURE WORKSURFACE
TST_267
5 of 8
May 2018
FIXED HEIGHT MOUNT BRACKET & END GABLE
WORKSURFACE SUPPORTS AND ACCESSORIES
transit Installation Guides

Section:
Description: Page No:
Date:
INFILL FLUSH END GABLE INSTALLATION
May 2018 6 of 8
TST_267
FIXED HEIGHT MOUNT BRACKET & END GABLE
WORKSURFACE SUPPORTS AND ACCESSORIES
transit Installation Guides
STEP 9: Mount the Gable Infill onto the Gable Assembly as illustrated.
B5

Section:
Description: Page No:
Date:
SECURE GABLE INFILL
May 2018 7 of 8
TST_267
FIXED HEIGHT MOUNT BRACKET & END GABLE
WORKSURFACE SUPPORTS AND ACCESSORIES
transit Installation Guides
STEP 10: Secure Gable Infill in place by using the screws provided.
B3

Section:
Description: Page No:
Date:
NOTES:
May 2018 8 of 8
TST_267
FIXED HEIGHT MOUNT BRACKET & END GABLE
WORKSURFACE SUPPORTS AND ACCESSORIES
transit Installation Guides