Teknion B_MDWO Operating and maintenance instructions

Page 1 of 2
For additional information on this installation contact Teknion | Roy & Breton Technical Support.
I ue Date: 2015 September 28
No. 2013
expansion casegoods & expansion desking Installation Guides
Expansion Casegoods Section – Multi-Level Work tation & De k Acce orie
Expansion Desking Section – De k Acce orie
B_MD O – Table Desk – Open Frame Legs B O – Frame Leg – Open
B_MD F – Table Desk with End Panels – Frame Legs B F – Frame Leg – Full Infill
B_MDG – Primary Desk for U-Shape Configuration R O – Frame Leg – Open
B_MDS – Primary Peninsula Desk for U-Shape Configuration R F – Frame Leg – Full Infill
Reference Installation Guides:
No. 2003 Expansion Casegoods " Overlapping Bridge – High Secondary Desk B_MBH "
No. 2004 Expansion Casegoods " Overlapping Bridge – Low Secondary Desk B_MBL "
No. 2005 Expansion Casegoods " Semi-Supported Leg – Solid B GL"
No. 1004 Expansion Desking " Rectangular orksurfaces RTLDL, RTLDC "
No. 1002 Expansion Desking " Rectangular Peninsula Desk – Half Gable RDRP "
No. 1044 Expansion Desking " Semi-Supported L-Shaped Desk RND R, RNDRR, RND S, RNDRS, RNR R, RNRRR, RNR S, RNRRS "
Kit No. /
Assy. No.
B_MDWO
B_MDG
Rectangular
Worksurface
BW_MDW
or
BW_MDG
or
BW_MDS
Rect. or
Elliptical
Grommet
(As per Order)
Cable Tray
N80-50017
1
2
1
22 2
111 1
1
1
IllustrationRef.
Product
A
Table or Primary Desks and Frame Legs -
Part / Product Identification and What's Included
BWWO
RWWO
B_MDWF
B_MDS
BWWF
RWWF
TOOLS REQUIRED:
Cross or Square Drive #2 and #3,
Wrench, and Level
X80-63012
+XX
(Only
applicable
with D (1") or
M (1 3/16")
thick)
X80-64117
(Included with
Frame Legs)
B
21
E
111 1
C
14 14 14 14
D
Quantity
B_MDWO
B_MDWF
B_MDG
B_MDS
BWWO
RWWO
BWWF
RWWF
Reinforcing Bar
A15-50501
+XX
#8 x 0.875"
Quadrex Pan Hd.
W. Screw, Zinc
E04-50084
1/4" – 20 x 1"
Quadrex Pan Hd.
M. Screw, Black
E01-50770
Semi-
Supported
Leg – Solid
R80-64000
+XX
24 24 12 12
2
1
2
1
2
1
F
G
Frame Leg –
Open
BWWOS
or
N80-64157
+XX+29
Frame Leg –
Solid Infill
BWWFLS
or
N80-64169
+XX+29
Frame Leg –
Glass Infill
BWWFGS
or
N80-64170
+XX+29
OR
AND
OR
OR

Page 2 of 2
I ue Date: 2015 September 28 (No. 2013-02)
No. 2013
expansion casegoods & expansion desking Installation Guides
Expansion Casegoods Section – Multi-Level Work tation & De k Acce orie
Expansion Desking Section – De k Acce orie
B_MD O – Table Desk – Open Frame Legs B O – Frame Leg – Open
B_MD F – Table Desk with End Panels – Frame Legs B F – Frame Leg – Full Infill
B_MDG – Primary Desk for U-Shape Configuration R O – Frame Leg – Open
B_MDS – Primary Peninsula Desk for U-Shape Configuration R F – Frame Leg – Full Infill
A
1
TABLE OR PRIMARY DESK AND FRAME LEG INSTALLATION
IF SEMI-SUPPORTED LEG INSTALLATION
NOTE:
For Semi-Supported Leg (E) installation, on the Primary Desks for U-Shape Configuration,
refer to the installation guide #2005 or L04-64112.
A
A
F
1
2F
B
NOTE:
If a Multi-Functional
Drawer (BADMF) is to be
installed on left side,
move bars on right side
and vice-versa.
C
2 3
G
Frosted side
must face
inward.
Levelers
must be close to
the inside edge.
1
2
4
3
D
B
NOTE:
If Applicable, for
Cable Tray installation,
refer to installation
guide #1205 or
L04-63115 for details.