TRIBU 06586-T User manual

ILLUM BAR TABLES TEAK
ASSEMBLY INSTRUCTIONS
06586-T - 06588-T
ILDT01 - 11-10-2019
Tribù nv
Oude Heidestraat 72
3740 Bilzen
BELGIUM
www.tribu.com
[email protected]
6Place bumpons on the inside of the table frame. Screw the bumpons in the recessed
holes as marked below. Then carefully place the ceramic top on the frame.
210x98 - 201x71
18 x Bumpon
265x98 - 265x71
22 x Bumpon
150x98
16 x Bumpon
98x98
12 x Bumpon

CONTENT ASSEMBLY INSTRUCTIONS
1 x
Table frame
8 x
Washer
Wood screw
8 x
Bolt
Bumpon
4 x
Short leg
4 x
Long leg or
Put the table frame on top of another bar/high table as shown in the picture below.
Use a protective cloth to protect the table frame.
Take 1 x long leg, 2 x bolt and 2 x washer. Repeat this for every leg. Screw the leg
onto the table frame in an alternating way. Note that every leg has an adjustable
glider so you can level the table.
For CERAMIC TOP, skip to step 6.
For TEAK TOP, continue to step 4.
Carefully place the teak top on the table.v
Fix the teak top using the wood screws.
1
2
3
4
5
1 x
Teak top
1 x
Ceramic top