Teledyne Lecroy 780C User manual

780C Multi-Interface Interoperability Tester –User Guide Page 1
January 19, 2017
Revision A9
780C Multi-Interface Interoperability Tester
for Video and Audio
User Guide
Rev: A9

780C Multi-Interface Interoperability Tester –User Guide Page 2
January 19, 2017
Revision A9
Table of Contents
1Overview of the 780C Multi-Interface Interoperability Tester.............................................................6
1.1 Scope of this User Guide............................................................................................................................6
1.2 Changes to this User Guide........................................................................................................................6
1.3 Introducing the 780C Multi-Interface Interoperability Tester .......................................................................6
1.4 Overview of 780C features .........................................................................................................................7
1.4.1 Standard features...................................................................................................................................7
1.4.2 Network Analyzer features.....................................................................................................................8
1.4.3 Cable and Repeater test features ..........................................................................................................8
1.4.1 Report File Creation feature...................................................................................................................8
1.4.2 Auto EDID Test ......................................................................................................................................9
1.4.3 Auxiliary Channel Analyzer for DDC monitoring features.......................................................................9
1.4.4 What is in the 780C shipping box...........................................................................................................9
2Physical Interfaces of the 780C Multi-Interface Interoperability Tester ..........................................10
2.1 Video Interfaces........................................................................................................................................10
2.2 Audio interfaces ........................................................................................................................................11
2.3 Administrative Interface ............................................................................................................................11
3General Operation ...............................................................................................................................13
3.1 Power Considerations...............................................................................................................................13
3.2 Tilt Bail......................................................................................................................................................13
3.3 Navigating through the 780C User Interface.............................................................................................14
3.3.1 Home Menu items................................................................................................................................14
3.3.2 Back Navigation ...................................................................................................................................16
3.3.3 Status Bar ............................................................................................................................................17
3.4 Calibrating the LCD...................................................................................................................................19
4Using the 780C Test Instrument to Video and Audio Pattern Tests on Sink Devices....................21
4.1 Making Physical Connections - HDMI.......................................................................................................21
4.1.1 Connecting the 780C to the Display Device - HDMI ............................................................................21
4.1.2 Connecting the 780C to the Display Device - HDBaseT......................................................................22
4.1.3 Connecting the 780C to the Display Device - SDI................................................................................ 22
4.1.4 Connecting the 780C to the Display Device - Analog ..........................................................................23
4.2 Selecting a Signal Type and Resolution ...................................................................................................23
4.2.1 Procedures for Selecting a Signal Type...............................................................................................23
4.2.2 Procedures for Selecting an Resolution and Frame Rate –HDMI and HDBaseT ...............................25
4.2.3 Procedures for Enabling AVMute.........................................................................................................28
4.2.4 Procedures for Selecting a Resolution and Frame Rate –SDI ............................................................29
4.3 Rendering Test Patterns on an HDTV ......................................................................................................30
4.3.1 Procedures for Outputting Test Patterns..............................................................................................30
4.4 Using Custom Test Image Packs.............................................................................................................. 42
4.5 Outputting 3D Test Patterns through HDMI or HDBaseT .........................................................................47
4.5.1 Configurations for Rendering 3D Bitmaps on an HDMI or HDBaseT Sink Device...............................47
4.5.2 Procedures for Obtaining 3D Bitmaps on HDMI or HDBaseT Sink Device .........................................48
4.5.3 Procedures for Rendering 3D Bitmaps or 3D Test Patterns on HDMI or HDBaseT Sink Device.........48
4.6 How to Scroll or Pan a Bitmap Pattern .....................................................................................................51
4.6.1 Guidelines for Scrolling Bitmaps ..........................................................................................................51
4.6.2 Procedures for Scrolling Bitmaps.........................................................................................................51
4.6.3 Procedures for Panning Bitmaps .........................................................................................................52
4.7 Testing Digital Audio on an HDTV or A/V Receiver ..................................................................................55
4.7.1 Connecting the 780C to an Audio Rendering Device...........................................................................55

780C Multi-Interface Interoperability Tester –User Guide Page 3
January 19, 2017
Revision A9
4.7.2 Procedures for Testing a Display with Dolby Digital or DTS Audio Test Patterns................................57
4.7.3 Procedures for Testing a Display with Dolby Digital or DTS Sine Wave Clips.....................................61
4.7.4 Procedures for Testing with Programmable Sine Waves.....................................................................63
4.7.5 Testing HDMI Audio Return Channel (ARC) 780C only.......................................................................66
5Using the 780C Test Instrument to Test HDMI and HDBaseT Protocols on Sink Devices ............69
5.1 Testing HDCP on an HDMI, HDBaseT HDTV, Projector or Repeater Device ..........................................69
5.1.1 Configurations for Testing HDCP on an HDMI Sink Device.................................................................69
5.1.2 Configurations for Testing HDCP on an HDBaseT Sink Device...........................................................70
5.1.3 Procedures for Testing HDCP on an HDMI or HDBaseT Sink Device.................................................70
5.2 Verifying the EDID on an HDMI, HDTV, HDBaseT Projector or HDMI Repeater Device.........................72
5.2.1 Configurations for Verifying and Viewing the EDID on an HDMI Sink Device......................................72
5.2.2 Configurations for Verifying and Viewing the EDID on an HDBaseT Sink Device or Input of an
HDBaseT Distribution Device...............................................................................................................73
5.2.3 Procedures for Testing and Viewing the EDID on an HDMI/HDBaseT Sink Device ............................74
5.2.4 Workflow for Comparing EDIDs ...........................................................................................................77
5.2.5 Procedures for Comparing EDIDs........................................................................................................78
5.3 Viewing the CEC devices on an HDMI/HDBaseT network .......................................................................81
5.3.1 Configurations for Testing CEC on an HDMI/HDBaseT Sink Device...................................................81
5.3.2 Procedures for Testing CEC on an HDMI/HDBaseT Sink Device........................................................82
5.4 Multi-protocol (HDCP, EDID and CEC) testing on an HDMI or HDBaseT HDTV or Projector ..................84
5.4.1 Configurations for running multi-protocol tests on an HDMI Sink Device.............................................84
5.4.2 Configurations for running multi-protocol tests on an HDBaseT Sink Device ......................................84
5.4.3 Procedures for running multi-protocol tests on an HDMI or HDBaseT Sink Device.............................84
6Using the 780C Test Instrument to Test HDMI or HDBaseT Source Devices .................................87
6.1 Testing Video from an HDMI Source Device ............................................................................................87
6.1.1 Connection Configurations for Testing HDMI Source Devices.............................................................87
6.1.2 Connection Configurations for Testing HDBaseT Outputs on Repeater and Distribution Devices.......88
6.1.3 Procedures for Viewing Video on an HDMI/HDBaseT Source Device.................................................89
6.1.4 Viewing the Incoming 4K HDMI/HDBaseT Video on a Connected Display using Passthrough ...........94
6.1.5 Viewing Video Metadata from an HDMI/HDBaseT Source Device ......................................................95
6.1.6 Procedures for Viewing Video on an SDI Source Device.....................................................................99
6.1.7 Viewing Video Metadata from an SDI Source Device........................................................................ 103
6.2 Viewing Source Data Island Packets on HDMI and HDBaseT ...............................................................106
6.2.1 Configurations for Viewing the Data Island Packets from an HDMI or HDBaseT Source Device ......106
6.2.2 Procedures for Viewing the HDMI/HDBaseT Data Island Packets from a Source Device ................. 106
6.3 Testing HDCP Max Devices on an HDMI Source Devices and Outputs of HDBaseT distribution
Devices................................................................................................................................................... 108
6.3.1 Configurations for Testing Max Devices an HDMI Source Device Supports......................................109
6.3.2 Procedures for Testing Max Devices a Source Device Supports....................................................... 109
6.3.3 Procedures for disabling HDCP on the 780C HDMI/HDBaseT Out port - GUI...................................111
6.3.4 Procedures for disabling HDCP on the 780C out port........................................................................112
6.4 Testing Audio of an HDMI Source Device or at the Output of an HDBaseT Distribution Device ............112
6.4.1 Configurations for Testing Audio on an HDMI Source Device............................................................112
6.4.2 Configurations for Testing Audio on the Output of an HDBaseT Distribution Device.........................113
6.4.3 Procedures for Testing Audio from an HDMI/HDBaseT Source Device............................................. 114
6.4.4 Procedures for Testing Audio from an HDMI/HDBaseT Source Device............................................. 119
6.4.5 Procedures for Audible Monitoring of LPCM Audio from an Digital Video Source Device .................124
6.5 Testing an HDMI or HDBaseT Source’s Response to EDIDs.................................................................129
6.5.1 Configurations for Testing an HDMI Source Devices Response to an EDID .....................................129

780C Multi-Interface Interoperability Tester –User Guide Page 4
January 19, 2017
Revision A9
6.5.2 Configurations for Testing an HDBaseT Device’s Output Response to an EDID...............................129
6.5.3 Procedures for Testing an HDMI Source Devices Response to an EDID..........................................130
7Using the 780C Test Instrument Installer Test Utility .....................................................................136
7.1 Diagnosing HDMI and HDBaseT Interoperability Problems toward the Source - Upstream...................137
7.1.1 Connection Configurations for Testing HDMI Source Devices........................................................... 137
7.1.2 Connection Configurations for Testing HDBaseT Source Devices ....................................................138
7.1.3 Procedures for Testing Upstream (Source Test) with the Installer Utility...........................................138
7.2 Diagnosing HDMI and HDBaseT Interoperability Problems at the Sink - Downstream ..........................142
7.2.1 Connection Configurations for Testing HDMI Sink Devices ............................................................... 142
7.2.2 Connection Configurations for Testing HDBaseT Sink Devices.........................................................142
7.2.3 Procedures for Testing Downstream (Sink Test) with the Installer Utility...........................................143
7.3 Diagnosing HDMI/HDBaseT Interoperability Problems with a Repeater................................................. 146
7.3.1 Connection Configurations for Testing HDMI Repeater Devices .......................................................146
7.3.2 Connection Configurations for Testing HDBaseT Repeater Devices................................................. 146
7.3.3 Procedures for Testing Repeaters (Repeater Test) with the Installer Utility....................................... 147
7.4 Diagnosing HDMI/HDBaseT Interoperability Problems in an HDMI/HDBaseT Network ......................... 150
7.4.1 Connection Configurations for Testing HDMI Links ...........................................................................150
7.4.2 Connection Configurations for Testing HDBaseT Links..................................................................... 150
7.4.3 Procedures for Testing HDMI Networks (Links) with the Installer Utility ............................................150
8Using the 780C to Monitor the HDMI/HDBaseT CEC and DDC channel ........................................153
8.1 Auxiliary Channel Analyzer (ACA) Transactions.....................................................................................153
8.2 Auxiliary Channel Analyzer –Emulation Monitoring of DDC on Sink...................................................... 154
8.2.1 Configurations for Monitoring DDC Transactions with ACA on HDMI Sink Devices .......................... 155
8.2.2 Configurations for Monitoring DDC Transactions with ACA on HDBaseT Sink Devices....................155
8.2.3 Monitoring DDC Transactions with ACA on HDMI or HDBaseT Sink Devices...................................156
8.2.4 Configurations for Monitoring DDC Transactions with ACA on HDMI Source Devices......................159
8.2.5 Configurations for Monitoring DDC Transactions with ACA on HDBaseT Source Devices................ 159
8.2.6 Procedures for Monitoring the DDC Transactions using the Auxiliary Channel Analyzer on HDMI
or HDBaseT Source Devices ............................................................................................................. 160
8.3 Configuration for Monitoring DDC Transactions with the ACA on an HDMI or HDBaseT Repeater
or distribution device...............................................................................................................................163
8.3.1 Procedures for Running an Auxiliary Channel Analyzer Test on HDMI/HDBaseT Repeater or
Distribution Devices ........................................................................................................................... 164
8.4 Auxiliary Channel Analyzer –Passive Monitoring................................................................................... 168
8.4.1 Configurations for Passively Monitoring CEC and or DDC Transactions with ACA on an HDMI
System ...............................................................................................................................................168
8.4.2 Procedures for Passive Monitoring DDC transactions and hot plug events with the Auxiliary
Channel Analyzer on HDMI Devices..................................................................................................168
8.5 Auxiliary Channel Analyzer –Monitoring of CEC Messages ..................................................................171
8.5.1 Procedures for Passive Monitoring HDMI CEC messages with the Auxiliary Channel Analyzer .......172
9Using the 780C Test Instrument to Test Cable or Repeaters.........................................................175
9.1 HDMI/HDBaseT Cable or Repeater Test................................................................................................175
9.1.1 Configurations for Running an HDMI/HDBaseT Cable or Repeater Test...........................................175
9.1.2 Procedures for Running an HDMI/HDBaseT Cable or Network (“Repeater”) Test ............................176
9.2 HDMI/HDBaseT or SDI Cable or Repeater Test.....................................................................................179
9.2.1 Configurations for Running an HDMI/HDBaseT Cable or Repeater Test...........................................179
9.2.2 Procedures for Running an SDI Cable Test....................................................................................... 180
9.3 HDMI Frame Compare Test.................................................................................................................... 182
9.3.1 Configuration for Running an HDMI Frame Compare Test ................................................................ 182

780C Multi-Interface Interoperability Tester –User Guide Page 5
January 19, 2017
Revision A9
9.3.2 Procedures for Running the Frame Compare Test ............................................................................182
9.3.3 Procedures for Running the Remote PRN Test .................................................................................184
9.4 HDBaseT Remote Cable Test ................................................................................................................186
9.4.1 Configuration for Running an HDBaseT Remote Cable Test.............................................................186
9.4.2 Procedures for Running the HDBaseT Remote Cable Test...............................................................186
10 Generating Reports with the Reports File Creation Feature..........................................................190
10.1 Report File Creation Feature Description ...............................................................................................190
10.2 Procedures for creating reports ..............................................................................................................190
10.2.1 Creating a report for source testing....................................................................................................190
10.3 Procedures for Accessing Reports .........................................................................................................197
11 Running the Automated EDID Tests on HDMI Source Devices .....................................................203
11.1 HDMI Auto EDID Test.............................................................................................................................203
11.1.1 Procedures for Configuring a Set of EDIDs for the Auto EDID Test................................................... 203
11.1.2 Configurations for Running an Auto EDID Test.................................................................................. 205
11.1.3 Procedures for Running the Auto EDID Test .....................................................................................206
11.1.4 Viewing the Auto-EDID Test report. ................................................................................................... 211
12 Creating and Using Custom Formats, EDIDs, Bitmaps and Menus ..............................................213
12.1 Creating and Using Custom Formats......................................................................................................213
12.1.1 Workflow for Using Custom Formats..................................................................................................213
12.1.2 Procedures for Creating and Loading Custom Formats.....................................................................213
12.2 Adding Reference EDIDs for Use in Testing HDMI Devices...................................................................217
12.2.1 Workflow for Importing EDIDs into the 780C......................................................................................217
12.2.2 Procedures for Importing EDIDs into the 780C.................................................................................. 217
12.2.3 Procedures for Saving an EDID into the 780C................................................................................... 219
12.3 Using Custom Bitmaps ........................................................................................................................... 222
12.3.1 Workflow for Importing Bitmaps .........................................................................................................222
12.3.2 Workflow for loading bitmaps from the SD card................................................................................. 222
12.3.3 Procedures for Importing Bitmaps......................................................................................................222
12.3.4 Procedures for Loading Bitmaps from SD Card.................................................................................225
12.4 Creating Custom Menus ......................................................................................................................... 226
12.4.1 To create a custom menu: .................................................................................................................227
12.4.2 To access custom menus: .................................................................................................................227
13 Command Interface ...........................................................................................................................230
13.1 Guidelines for Using the Command Line ................................................................................................230
13.2 Procedures for Enabling the Command Line Interface through USB Port .............................................. 230
13.3 Procedures for using the Command Line Interface through RS-232 Port (780C only) ........................ 232
13.4 Procedures for Entering Commands.......................................................................................................233
14 Using the Keypad ..............................................................................................................................254
14.1 Connecting a Keypad.............................................................................................................................. 254
14.2 Enabling and Configuring an RS-232 Keypad ........................................................................................254
14.3 Keypad Functionality............................................................................................................................... 255
14.4 Selecting a Format (Timing).................................................................................................................... 256
14.5 Selecting a Test Pattern (Image) ............................................................................................................258
14.6 Programming a Test Sequence using the keypad .................................................................................. 259
14.7 Programming a Test Sequence in the UserKeys file ..............................................................................260
15 Upgrading the 780C...........................................................................................................................262
15.1 Upgrading the Firmware and Gateware on your 780C Handheld Test Instrument for HDMI............... 262

780C Multi-Interface Interoperability Tester –User Guide Page 6
January 19, 2017
Revision A9
1Overview of the 780C Multi-Interface Interoperability Tester
This section provides an overview of the 780C Multi-Interface Interoperability Tester. The 780C provides HDMI
Tx port and an HDMI Rx port operating up to 300MHz pixel and TMDS rates for testing devices which support
4K resolutions. The 780C also has analog outputs.
1.1 Scope of this User Guide
This User Guide documents the complete operation of the 780C Multi-Interface Interoperability Tester.
Note: Please be sure to check the quantumdata website for updates to this User Guide.
1.2 Changes to this User Guide
This User Guide has been updated to correct audio monitoring section for HDMI incoming video.
1.3 Introducing the 780C Multi-Interface Interoperability Tester
The 780C Multi-Interface Interoperability Tester is a portable multimedia pattern generator that enables you to
conduct quick, on-site verification testing of your HDMI, HDBaseT and 3G-SDI systems and analog video
displays. The 780C is equipped with both reference source and reference sink HDMI, HDBaseT and 3G-SDI
interfaces allowing you to test audio, video and protocols—HDCP, EDID, CEC & infoframes—of any type of
HDMI, HDBaseT and 3G-SDI device: sources, repeaters and sinks. Because the 780C has both digital video
outputs and inputs, you can test cables and systems with splitters, extenders and switches as well with the
optional pixel error test feature. You can also test hybrid digital video systems comprised of HDMI, HDBaseT
and 3G-SDI devices.
A color touch display makes the 780C easy and convenient to use. When testing a digital video source device
you can toggle between operating the unit through the touch screen and viewing the incoming video from the
source.

780C Multi-Interface Interoperability Tester –User Guide Page 7
January 19, 2017
Revision A9
Note: 780C Image above shows the front edge with the SD Card slot which is used for storing and loading
bitmaps, reports and for recovery in the event of a failed upgrade.
1.4 Overview of 780C features
The 780C Multi-Interface Interoperability Tester provides a rich set of features. The following is a list of
available options and the key features and benefits of each:
1.4.1 Standard features
The following features are standard with the 780C:
Pattern testing for HDTVs - Enables you to conduct pattern testing for an HDTV through the digital video
and analog component outputs. Provides dozens of patterns with variation options on most.
Custom bitmaps and pattern scrolling –The 780C enables you to import bitmaps for use in pattern testing.
You can initiate a scroll of these bitmaps with user control over the rate and extent of horizontal movement.
Create custom formats using the standalone Format Editor.
3D bitmap pattern testing –The 780C enables you to import 3D bitmaps for use in pattern testing. You can
create your own bitmaps from any stereoscopic images you have using the Quantum Data Bitmap
Conversion Tool available from the Quantum Data website:
http://www.quantumdata.com/apps/3D/BMP_conv.asp. There are some sample 3D bitmaps on this
webpage as well.
Video confidence test of an HDMI, HDBaseT or 3G-SDI source device –The 780C enables you to view the
incoming video on the 780C’s LCD screen. 780C enables the incoming image to be routed out the digital
video output connector if unused. 780C also enables scrolling to view an entire unscaled 4K image
received on the HDMI and HDBaseT input ports.
Audio confidence test of an HDMI, HDBaseT or 3G-SDI source device –The 780C enables you to listen to
the incoming LPCM audio through the 780C’s headphone jack on the front edge or through an embedded
speaker. There will be no sound when compressed audio is received on the incoming HDMI stream.
Audio Return Channel confidence test of an HDMI 1.4 A/V receiver –The 780C can emulate an ARC Tx
device on its HDMI IN port. Note: The 780C does not support enabling ARC on the AV receiver, therefore
you will have to enable ARC through some other means.

780C Multi-Interface Interoperability Tester –User Guide Page 8
January 19, 2017
Revision A9
Audio testing for AVRs and HDTVs –The 780C provides multi-channel digital audio test patterns through
the HDMI, HDBaseT., 3G-SDI, SPDIF and optical outputs. A variety of audio patterns and formats are
provided at sampling rates from 32kHz up to 192kHz and bit depths of 16, 20 and 24. Format supported
are Dolby Digital and DTS compressed formats and lossless compressed or high bit rate HDMI formats.
Installer Utility –Provides simplified diagnostics of HDMI and HDBaseT interoperability problems in an
installation. The Installer utility enables installers to connect the 780C into an HDMI/HDBaseT network and
quickly conduct diagnostics without required detailed knowledge of protocols.
Command line interface for automated testing.
1.4.2 Network Analyzer features
The following Network Analyzer features are available:
HDCP test of an HDMI or HDBaseT sink or input to a repeater device –The 780C enables you to run an
HDCP functional test on an HDMI or HDBaseT sink device directly or through a repeater device.
EDID test of an HDMI or HDBaseT HDTV, projector or input to a repeater device –The 780C enables you
to run an EDID functional test on an HDMI or HDBaseT sink device directly or through a repeater device.
You can view the entire EDID in human readable text. You can also run a portion of EDID compliance test.
Video test of an HDMI, HDBaseT or SDI source device –The 780C provides an HDMI, HDBaseT or SDI
input for testing HDMI, HDBaseT or SDI source devices. You can run a verification test of a video source
which includes timing and format information and an indication of whether the video is HDCP content
protected.
Data Island test of an HDMI or HDBaseT source device –The 780C provides an HDMI/HDBaseT input for
testing HDMI or HDBaseT source devices. You can view the infoframes and other data islands.
Audio test of an HDMI, HDBaseT or 3G-SDI source device –The 780C provides HDMI, HDBaseT and 3G-
SDI inputs for testing source devices. You can run a verification test of an audio source which includes
decoding of the audio IEC headers, audio infoframes and audio sample packet headers (for HDMI and
HDBaseT and parsing out of the channel status bits for 3G-SDI as well.
EDID test of HDMI or HDBaseT source device or outputs –The 780C’s HDMI or HDBaseT input ports can
be provisioned with any EDID you have access to. You can verify that a source device responds properly to
the provisioned EDID. The EDID could be a known-good EDID or an EDID that you have created
specifically for testing.
HDCP test of an HDMI or HDBaseT source device –The 780C enables you to run a test to determine how
many HDCP devices an HDMI or HDBaseT source can support during HDCP authentication.
CEC ping test of any HDMI device –The 780C enables you to run a CEC ping test on an HDMI device.
1.4.3 Cable and Repeater test features
The following features are available with the Cable and Repeater test option:
Cable & Repeater test –Because the 780C has both digital video inputs and outputs, you can loop a cable
or entire distribution networks comprised of splitters, extenders, repeaters, switches, even hybrid networks
with HDMI, HDBaseT or 3G-SDI components, from the 780C’s output to input and run a pseudo-random
noise pattern test to determine pixel errors on the TMDS lines. The feature also runs a continuity test on
the HDMI or HDBaseT DDC test pair, CEC bus, the +5V line and the hot plug lead. The Repeater test also
shows you the hot plug delay between the downstream side and the upstream side and the pulse width.
The Cable & Repeater Test enable you to test a cable, repeater or distribution network if the source and
sink ends are collocated. If the source and sink ends are not collocated then you need to use the Frame
Compare test described below.
1.4.1 Report File Creation feature
The following features are available with the Report File Creation option:

780C Multi-Interface Interoperability Tester –User Guide Page 9
January 19, 2017
Revision A9
Enables residential installers, proAV integrators and test engineers in R&D to produce a record of the tests
they perform. Reports can be run on HDCP, Format Analyzer, Audio Analyzer, Cable tests, auxiliary
channel analyzer tests for any interface (HDMI, HDBaseT or DisplayPort). The reports can be provided to
customers, colleagues or to the contracting agent to verify and demonstrate project completion. The reports
can be run on a single test or aggregated for a series of tests. The reports can be transferred by SD card or
the USB interface and viewed in a standard browser or any text editor.
1.4.2 Auto EDID Test
The following features are available with the Auto EDID test option:
Select a series of EDIDs to test a source’s handling of them.
Emulate the EDIDs on the 780C HDMI or HDBaseT Input port.
Test runs automatically and flags improper handling. Checks for proper VIC, timing, video type, color depth
and sampling mode.
1.4.3 Auxiliary Channel Analyzer for DDC monitoring features
The following features are available with the Auxiliary Channel Analyzer test options:
DDC monitoring with Auxiliary Channel Analyzer (ACA) –The 780C ACA enables you to monitor HDMI or
HDBaseT CEC DDC transactions such as HDCP and EDID as well as hot plug related events while
emulating an HDMI or HDBaseT source and/or an HDMI or HDBaseT sink device(s) in a system. You can
also monitor passively between two HDMI/HDBaseT devices. When monitoring passively you can also
view the +5V status.
1.4.4 What is in the 780C shipping box
The 780C instrument shipping container includes the items listed in Table 1-1 below:
Table 1-1: 780C Shipping Box Contents
Item Description
Part No.
780C Multi-Interface Interoperability Tester.
00-00236
12V DC, 3.3A (40 W) output - Power Supply / Adapter.
25-00106
Line cord for 12V Power Supply.
30A00400A03
Cable: HDMI-to-HDMI Type A.
30-00146
Cable: VGA to (3) RCA adaptor.
30-00203
Cable: USB.
30-00163

780C Multi-Interface Interoperability Tester –User Guide Page 10
January 19, 2017
Revision A9
2Physical Interfaces of the 780C Multi-Interface Interoperability Tester
This section describes the administration, video and audio interfaces on the 780C test instrument:
2.1 Video Interfaces
Table 2-1 below describes the video interfaces on the 780C test instrument, these interfaces are used to render
test patterns for testing consumer electronic HDTVs and computer displays.
Table 2-1: 780C Video Interfaces
Video Interface
Description
HDMI (1) Output Type A
Single HDMI output connector. Supports HDMI 1.4x:
Bit Depth: 24/30/36 bit.
Colorimetry: RGB, YCbCr.
Sampling: 4:4:4, 4:2:2, 4:2:0.
Pixel rate: Timings up to 300MHz for 4K x 2K resolutions.
DVI support through HDMI to DVI adapter cable (RGB, 4:4:4, 24 bit).
Audio: LPCM, Dolby Digital and DTS (more details below).
HDBaseT (1) Output RJ-45
Single HDBaseT output connector. Supports HDBaseT 1.x:
Bit Depth: 24/30/36 bit.
Colorimetry: RGB, YCbCr.
Sampling: 4:4:4, 4:2:2, 4:2:0.
Pixel rate: Timings up to 300MHz for 4K x 2K resolutions.
DVI support through HDMI to DVI adapter cable (RGB, 4:4:4, 24 bit).
Audio: LPCM, Dolby Digital and DTS (more details below).
3G-SDI (1) Output BNC
3G-SDI output connector.
Bit Depth: 24/30/36 bit.
Colorimetry: YCbCr.
Sampling: 4:4:2.
Data rate: Timings up to 2.97Gbps.
Audio: LPCM, Dolby Digital and DTS.
Analog Output –Component and VGA (HD15F)
Bit Depth: 24 bit color depth.
Colorimetry: RGB, YPbPr.
Pixel rate: 80MHz.
Sync types: separate and composite.
HDMI (1) Input Type A
Single link HDMI input connector. Supports HDMI 1.4x:
Colorimetry: RGB, YCbCr.
Sampling: 4:4:4, 4:2:2, 4:2:0.
Pixel rate: Timings up to 300MHz for 4K x 2K resolutions.
HDBaseT (1) Input RJ-45
Single link HDBaseT input connector. Supports HDBaseT 1.x:
Colorimetry: RGB, YCbCr.
Sampling: 4:4:4, 4:2:2, 4:2:0.
Pixel rate: Timings up to 300MHz for 4K x 2K resolutions.
3G-SDI (1) Input BNC 5
Single link HDMI input connector.
Colorimetry: YCbCr.
Sampling: 4:2:2.
Data rate: Timings up to 2.97Gbps.

780C Multi-Interface Interoperability Tester –User Guide Page 11
January 19, 2017
Revision A9
2.2 Audio interfaces
Table 2-2 below describes the audio interfaces supported on the 780C test instrument.
Table 2-2: 780C Audio Interfaces
Interface
Description
HDMI (1) Output Type A
Single HDMI output connector. Supports HDMI 1.4x:
Channels: 8.
Bits per sample: 16, 20, 24.
Sampling rates (kHz): 32.0, 44.1, 48.0, 88.2, 96.0, 176.4, 192.0.
Formats: LPCM, Dolby Digital (clips), DTS (clips)
HDBaseT (1) RJ-45
Single HDBaseT output connector. Supports HDBaseT 1.x:
Channels: 8.
Bits per sample: 16, 20, 24.
Sampling rates (kHz): 32.0, 44.1, 48.0, 88.2, 96.0, 176.4, 192.0.
Formats: LPCM, Dolby Digital (clips), DTS (clips)
SPDIF - RCA
SPDIF RCA audio connector:
Channels: 8 (clips)
Bits per sample: 16, 20, 24.
Sampling rates (kHz): 32.0, 44.1, 48.0, 96.0
Formats: LPCM, Dolby Digital (clips), DTS (clips)
Optical –JIS FOS
Optical audio connector:
Channels: 8 (clips)
Bits per sample: 16, 20, 24.
Sampling rates (kHz): 32.0, 44.1, 48.0
Formats: LPCM, Dolby Digital (clips), DTS (clips)
HDMI (1) Input (Audio Return Channel) Type A
HDMI ARC SPDIF:
Channels: 8 (clips)
Bits per sample: 16, 20, 24.
Sampling rates (kHz): 32.0, 44.1, 48.0, 96.0
Formats: LPCM, Dolby Digital (clips), DTS (clips)
2.3 Administrative Interface
The 780C is equipped with a USB interface. This interface is used to download custom bitmaps and to upgrade
firmware and issue commands. The USB interface is a peripheral device. There are two modes:
COM - Command Mode. Used for sending commands to set the interface, select formats and patterns.
Disk - Mass Storage Mode. Used for downloading bitmaps, audio clips and upgrading firmware or
gateware.

780C Multi-Interface Interoperability Tester –User Guide Page 12
January 19, 2017
Revision A9

780C Multi-Interface Interoperability Tester –User Guide Page 13
January 19, 2017
Revision A9
3General Operation
This section describes power up, power usage and general operation.
3.1 Power Considerations
The 780C has a rocker style power switch on the back panel. Refer to the photo below.
The 780C is supplied with the Part No 25-00106 12V DC power supply adapter as well as a part number
30A00400A03 line cord.
3.2 Tilt Bail
The 780C has support bail for convenience in viewing. This is depicted in the illustration below. (The illustration
shows the 780; however, the 780C tilt bail operates in the same manner.)

780C Multi-Interface Interoperability Tester –User Guide Page 14
January 19, 2017
Revision A9
3.3 Navigating through the 780C User Interface
The 780C user interface is a color touch screen display 800 by 480. A single touch will activate an item on the
screen or take you down to a lower level menu. A +indicates that you have to double touch to navigate down to
a lower level menu.
3.3.1 Home Menu items
The 780C’s Home screen is shown below.

780C Multi-Interface Interoperability Tester –User Guide Page 15
January 19, 2017
Revision A9
Table 3-1 below shows functions available from the Home screen.
Table 3-1: Top Level Menu
Item
Submenu - Pattern
Third Level Menu
Value
Top Menu Bar
Home / Back
navigation
See Below
Enables you to navigate back to the previous
screen.
Reports Menu
Note: Changes to
Add a Report when
a test is run.
Report File Format
Text Only
HTML
Enables you to specify the format of a report.
Start Report
Initiates a report
Add Comment
Grayed out until Start Report is activated
Set Save Dir
Enables you to create and name a directory on the
SD card or the 780 file system.
Save to SD
Enables you to create and name a report on the SD
card to save a report to. Unavailable without an SD
card in the slot.
Save to Unit
Enables you to create and name a report in the 780
file system to save a report to.
Preferences
Page 1
Audible Touch
Off
On
Screen Brightness
Min
25%
50%
75%
Max
USB Mode
COM for commands
Disk for downloading files and upgrades
Startup Mode
Set the 780’s menu configuration to the default
menu (shown throughout this User Guide).
Custom Menu –Utilize a configuration that you
have created.
Custom Menu
Enter to navigate to custom menu screen.
Preferences
Page 2
Hot Plug Formats
On –780C automatically select the formats in
the EDID of the connected HDTV.
Off –780C will not automatically select the
formats in the EDID of the connected HDTV.
AVMute on Format
Change
On –AVMute will occur when the resolution is
changed on the 780C HDMI output.
Off –AVMute will occur when the resolution is
changed on the 780C HDMI output.
RS-232 Baud Rate
Configure the baud rate of the RS-232 interface
on the 780C (N/A to 780).
RS-232 Keypad Mode
Off –Keypad connected to RS-232 is disabled.
On –Keypad connected to RS-232 is enabled.
Help
Upgrades
USB Storage Flash
Application Flash
FPGA Flash
Touchscreen
Calibrate the touch screen display
Source Tests Buttons
Analyze Video
Format
Viewing Source Data Island Packet

780C Multi-Interface Interoperability Tester –User Guide Page 16
January 19, 2017
Revision A9
Display Video
Testing Video from an HDMI Source Device
Passthrough Video
Viewing the Incoming 4K Video on a Connected Display using Passthrough
View Data Packets
Viewing Source Data Island Packet
Test HDCP
Testing HDCP Max Devices on an HDMI Source Device
Test CEC
Viewing the CEC devices on an HDMI network
Analyze Audio
Testing Audio of an HDMI Source Device
Configure Audio
Monitor
Procedures for Monitoring LPCM Audio from a Source Device (780C only)
Sink Tests Buttons
Test EDID
Verifying the EDID on an HDMI HDTV or HDMI Repeater Device
Test HDCP
Testing HDCP on an HDMI HDTV or HDMI Repeater Device
Test CEC
Viewing the CEC devices on an HDMI network
Link Tests Buttons
Analyze Aux Channel
Procedures for Monitoring Auxiliary Channel events and transactions
Test Cable/Repeater
Using the 780C Test Instrument to Test HDMI Cable or Repeaters
Test Link
Procedures for Installer Utility
Installer Tests Buttons
Test Sink
Using the 780C Test Instrument Installer Utility
Test Source
Using the 780C Test Instrument Installer Utility
Test Repeater
Using the 780C Test Instrument Installer Utility
3.3.2 Back Navigation
When you navigate away from the Home screen a white arrow will appear in the upper left next to the name of
the of the screen you are on. You can navigate to the previous screen by touch selecting this arrow. In the
example below, touch selecting the upper left area on or near the white, left facing arrow next to Signal Type
will take you to the previous screen.

780C Multi-Interface Interoperability Tester –User Guide Page 17
January 19, 2017
Revision A9
3.3.3 Status Bar
The 780C has a status bar on the bottom of the screen.
The items in the status bar are described in the Table 3-2.
Table 3-2: Status Bar
Type
Status Item
Function
HDMI/HDBaseT/SDI IN
Video Type Status
Indicates the status of video on the
HDMI/HDBaseT/SDI Rx ports. This includes:
Video interface: HDMI or DVI, HDBaseT or
SDI
Color depth: 8, 10, 12
Video type: RGB or YCbCr
Sampling mode: 4:4:4, 4:2:2, 4:2:0
Note: When SDI is active on the input, the Video
Type is always YCbCr and the sampling is always
4:2:2.
Video Resolution Status
Indicates the video resolution on the HDMI Rx port.
This includes:
Horizontal Active in pixels
Vertical Active in pixels
Frame rate

780C Multi-Interface Interoperability Tester –User Guide Page 18
January 19, 2017
Revision A9
Video Identification Status
Indicates the video resolution on the HDMI Rx port.
This includes:
Horizontal Active in pixels
Vertical Active in pixels
Frame rate
3D Status
Indicates the status of 3D video for HDMI or
HDBaseT. This includes:
3D enabled or disabled
3D format
AVMute status
Indicates the AVmute status, enabled or
disabled. Applies only to HDMI and HDBaseT.
HDCP Status
Indicates whether the incoming video is encrypted
with HDCP.
+5V Status
Indicates whether +5V is detected from the HDMI
or HDBaseT source.
HDMI/HDBaseT/SDI OUT
Video Type
Status/Selection
Indicates the video on the HDMI/HDBaseT/SDI Tx
ports. This includes:
Video interface: HDMI or DVI
Color depth: 8, 10, 12
Video type: RGB or YCbCr
Sampling mode: 4:4:4, 4:2:2, 4:2:0
Note: When SDI is active on the output, the Video
Type is always YCbCr and the sampling is always
4:2:2.
Provides access to the Video Signal Type screen.
Video Resolution
Status/Selection
Indicates the video resolution on the HDMI Tx port.
This includes:
Horizontal Active in pixels
Vertical Active in pixels
Frame rate
Provides access to the Video Format screen.
Video Pattern
Status/Selection
Indicates the video pattern on the HDMI Tx port.
Provides access to the Video Pattern screen.
3D Format
Status/Configuration
Indicates the status of 3D video. This includes:
3D enabled or disabled
3D format
Provides access to the 3D video configuration
screen.
Audio Status
Indicates the Audio status:
Audio format
Audio channels
Audio sampling rate

780C Multi-Interface Interoperability Tester –User Guide Page 19
January 19, 2017
Revision A9
HDCP Status
Indicates whether the incoming video on the HDMI
In port is encrypted with HDCP.
AVMute
HDCP Status
+5V Status
Indicates the status of the following for HDMI or
HDBaseT:
AVMute active/inactive status
HDCP active/inactive status
+5V present/not present status
3.4 Calibrating the LCD
You can calibrate the touch screen of your 780 if necessary.
Important Note: Please follow the procedures below carefully. Improper calibration can lock the unit up. It is
preferable that you contact Quantum Data Support unless you have learned how calibrated the screen
properly.
Use the following procedures to perform the calibration.
1. From the Home menu, navigate to the Help menu by pressing the Help activation button on the upper
status bar. The Home menu is shown below.
The Help menu appears as shown below:

780C Multi-Interface Interoperability Tester –User Guide Page 20
January 19, 2017
Revision A9
2. Touch select the Calibrate activation button. A screen appears instructing you to press each of four red
squares.
When you finish touch selecting the fourth box, the calibration is completed and you will return to the Home
menu.
3. If the calibration fails and you cannot access the menus, establish a command line session and enter the
calibration command:
TCAL
This will cause the screen to display the calibration screen again.