Televes Evoca 130990 User manual

Televes Evoca 130990
connections
1 2 3
antenna
in
USB
alternate:
USB power
from TV
USB power supply
(inclu e )
4' coax cable with
junction block (inclu e )
TV
12' coax
cable
(inclu e )
Feb-22-2023
copyright 2023
Ness Electronics
5G mo em
(not inclu e )
not
use
Evoca
antenna
w/preamp
optional
5G exten er
antenna
connection
USB
cable
(incl.)
TV
ant.
USB
note – the 5G exten er is a separate feature an is not
require for TV antenna operation

Televes Evoca 130990 antenna installation
installation for TV reception
all cables needed for TV antenna installation are included with the antenna
USB power is required to power the TV preamp in the antenna
the antenna may get better reception with the metal mounting plate attached
antenna can be table mounted (vertically or horizontally) mast or wall mounted w/included hardware
see Televes instructions for mounting details
locate the 4' coax cable with the square junction block connect the cable to the TV antenna input
connect the USB cable to the square junction block
connect the other end of the USB cable to the USB power supply (included)
alternately: connect the USB cable to a USB input on the TV
connect the 12' coax cable to the square junction block
then connect the free end of the 12' coax cable to connector #3 on the antenna
use a longer piece of RG-6 coax if needed
plug in the USB power supply or power up the TV
auto-scan the antenna input on the TV to find available new channels
refer to TV owner's manual for details
like cell phone signals TV signals also have dead spots try different antenna locations for best signal
re-scan channels on the TV after re-positioning the antenna
connector #2 is unused (for future use)
connector #3 is for the optional 5G / LTE extender see below
installation for 5G / LTE cell phone data extender (optional)
connect a coax cable from connector #1 on the antenna to a 5G modem inside the house
note the 5G modem and coax cable are not included
the 5G / LTE antenna is totally separate from the TV antenna and is not needed for TV reception
the 5G / LTE antenna is passive and doesn't need power from the USB cable
Mar-15-2023