Teridian 71M6515H User manual

71M6515H Quick Start Guide
71M6515H Demo Board
QUICK START GUIDE
Getting Started
The TERIDIAN Semiconductor Corporation (TSC) 71M6515H Demo Board is a demonstration board for evaluating
the 71M6515H meter AFE IC for three-phase electronic power metering applications. It incorporates a 71M6515H
integrated circuit, peripheral circuitry, and on-board power supply as well as a companion Debug Board that allows a
connection to a PC through a RS232 port. The Demo Board allows the evaluation of the 71M6515H energy meter
AFE chip for measurement accuracy and overall system use.
A PC-resident program provides a graphical user interface (GUI) that enables the user to control and evaluate all
important chip functions without having to write software.
Safety and ESD Notes
Connecting live voltages to the demo board system will result in potentially hazardous voltages on the demo board.
EXTREME CAUTION SHOULD BE TAKEN WHEN HANDLING THE DEMO
BOARD ONCE IT IS CONNECTED TO LIVE VOLTAGES!
THIS DEMO SYSTEM IS ESD SENSITIVE! ESD PRECAUTIONS SHOULD BE
TAKEN WHEN HANDLING THE DEMO BOARD!
Demo Board Kit Contents
• 71M6515H Demo board containing one 71M6515H IC (rectangular PCB) in 64-pin LQFP socket.
• Debug Board (small rectangular PCB)
• Two 5VDC/1,000mA universal voltage wall transformers w/ 2.5mm plug (Switchcraft 712A compatible)
• Serial cable, DB9, Male/Female, 2m (Digi-Key order number AE1020-ND)
• CD-ROM containing 71M6515H data sheet, PC-resident program (GUI) and Demo Board
Documentation (PDF files), Utilities
Revision 2.0 1 of 2
© Copyright 2004-2005 TERIDIAN Semiconductor Corporation

71M6515H Quick Start Guide
Revision 2.0 2 of 2
© Copyright 2004-2005 TERIDIAN Semiconductor Corporation
Demo Board Test Setup
The file DBUM6515.pdf is a document containing detailed instructions on how to set up and use the Demo Board.
This document should be carefully read and understood before attempting to use the Demo Board.
The figure below shows the basic connections of the Demo Board plus Debug Board with the external equipment.
Power
Power
Host PC
Debug
Board
Power Supply
(100 to 240VAC,
1ADC Output)
Demo
Board
Power
Country-Specific Adapters
US
UK
Australia
Europe
GUI
Using the Demo Board
The Demo Board is a ready-to-run meter with a Kh of 3.2 Wh/pulse (if used with CTs with 2,000:1 winding ratio). The
Demo Board has been tested on a meter calibration system, but it has not been calibrated. Please refer to the Demo
Board User’s Manual for further details on how to use the Demo Board.
Documentation
All data sheets and User’s Manuals are provided in electronic form, i.e. on the CD-ROM supplied with this kit. The
TERIDIAN Semiconductor web site should be checked frequently for updates.
Software/Utilities
The PC program (GUI) can be found on the supplied CD-ROM. The Windows ® 2000 operating system is required to
run the executable (PMTest.exe).
Support
Support is available from:
TERIDIAN Semiconductor Corporation
6440 Oak Canyon Rd.
Irvine, CA 92618-5201
Phone: [phone] ▪Fax: [phone]
http://www.teridian.com/
[email protected]
TERIDIAN Semiconductor Corporation makes no warranty for the use of its products, other than expressly contained in the
Company’s warranty detailed in the TERIDIAN Semiconductor Corporation standard Terms and Conditions. The company
assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or
specifications detailed herein at any time without notice and does not make any commitment to update the information
contained herein.