three h UNITE + CENTER PEDESTAL User manual

UNITE
+ CENTER PEDESTAL
INSTRUCTIONS

8 x 7/8 Screw 8 x 3/4 Screw Fast Cap Screw Uro Screw L Bracket
Robertson Screwdriver Phillips Screwdriver
• Product that is damaged by the end user due to misuse, accident, abuse,
negligence or shipping is not covered under Three H warranty.
• Use tools and hardware mentioned above to avoid any product faults.
• It is best to assemble our furniture with 2 or more persons.
• If you believe you are missing pieces, please contact [e-mail]
DISCLAIMERS!
INCLUDED HARDWARE
REQUIRED TOOLS
Hardware & tools required may vary depending on the Unite™ specifics.
The following instructions do not specify the amount of hardware included.
Due to variations in design, a separate hardware list will be provided.
GETTING STARTED
Assemble on a soft surface to avoid scratching the worksurface.

STEP 1
STEP 2
STEP 3
Place the worksurface face down on a
soft, clean surface.
Attach the Post Legs using 8 7/ 8 " Screws.
Connect Tops
Fasten the Tops
Slide the 2 top pieces together on top of
the pre-configured center pedestal.
Attention: Be careful not to damage the
tops.
With the tops aligned, fasten them
together using 2 Fast Cap Screws on the
Reveal.

STEP 4
STEP 5
STEP 6
Mending Plates
Rotate the Mending Plates to their
proper positions.
Fasten using 83 /4 " Screws.
L Brackets
Level
Attach the Tops to the Center Pedestal
using the provided L Brackets and Uro
Screws.
Adjust the base levelers anywhere that it
is requried.

Need Help?
[e-mail] | 1.800.767.5374
May 31, 2018
Revision No.1