TMG TMG-CRS1060 User manual

►WWW.TMGINDUSTRIAL.COM P1/19 Toll Free:1-877-761-2819
Main Specifications :
- Assembly size : W3 x L18 x H2 (m) / 10 x 60 x7 (ft)
- Shoulder wall clearance height : 1.2 m /3.9 ft
Prior to assembly
Please read the instructions carefully before installation. It is important to follow your
local safety regulations and industry standards during installation. Regulations may
include but are not limited to :
- Safety helmets, protective eyewear, and clothing
- Safety harnesses for all elevated workers
- Proper ladder, cage, and safety operation
Check all components and parts before installation. All parts are marked with a part
number, please refer to the parts list to make sure you have all parts.
Choose a day with low or no wind to install, assembly is hard in heavy wind. Do not
make any alterations to the structure. Do not hang any weights on the frame during
installation, including parts. We are not responsible for any damages or injuries caused by
inappropriate installation, unauthorized modifications or extreme weather.
This building is not intended for human occupancy.
Read the following item list carefully and count the number of items to ensure that all
parts are included prior to setup.
Review the whole structure and choose the proper installation site
Choose a solid flat level ground area to set up the building. Do not install the building on
soft ground, wetland, uneven surfaces, sloped surfaces, or on top of structures that are not
rated to hold its weight.
We strongly recommend that you build the structure on a solid foundation such as cement
and use anchor bolts on all baseplates.
Be aware of the surrounding area. Do not set up the building near snowdrifts, open
flames or exposed electrical wires. Do not keep heat sources near the fabric cover. Keep
the building surroundings clear at all times.

►WWW.TMGINDUSTRIAL.COM P2/19 Toll Free:1-877-761-2819
TMG-CRS1060 Part List
Parts
Code
Graphical
Description
Length
Qty
1
Peak tube
φ32xL1154mm
32
1A
Peak tube
φ32xL1178mm
8
2
Peak arch tube
(for front and rear truss)
L144xW120mm
4
2A
Peak arch tube ( middle
trusses )
L198xW144mm
16
3
Shoulder tube
(front and rear truss)
L138xW120mm
4
3A
Shoulder tube
(for middle truss)
L198xW138mm
16
4
Sidewall tube
φ32xL1183mm
20
5
Lower horizontal tube
φ32xL2030mm
18
6
Upper horizontal tube
φ32xL1922mm
36
7
Front and rear foot tube
L166xW52mm
4
8
Front and rear Lower horizontal
tube
φ32xL834mm
4
9
Door right pillar
φ32xL1937mm
1
9A
Door left pillar
φ32xL1937mm
1
10
Inclined tube
φ32xL1130mm
8

►WWW.TMGINDUSTRIAL.COM P3/19 Toll Free:1-877-761-2819
11
Door
L805xW548mm
2
12
Door frame tube
φ32xL568mm
1
13
Pipe clamps
φ32xL70mm
16
13A
Clip
L93xW40mm
44
14
Connector
L55xW34mm
4
15
Screw bolt
M8x50mm
20
15A
Screw bolt
M6x60mm
22
15B
Tapping screw
#12x25mm
22
16
Screw bolt
M6x60mm
20
17
Waterproof plug
φ32mm
20
18
Barbed wire
L62xW2m
1
19
Plastic cable tie
L200mm
900
20
Tension rope
L150mm
90
21
Roof fabric tarp cover
W7.8xL3.62m
1
22
Spring clip
(φ7.6mm)
160

►WWW.TMGINDUSTRIAL.COM P4/19 Toll Free:1-877-761-2819
Step 1: Install the spring clip.
Parts
Code
Graphical
Qty
1
32
4
20
6
36
8
4
22
160

►WWW.TMGINDUSTRIAL.COM P5/19 Toll Free:1-877-761-2819
Step 2: Assemble front and rear trusses.
Parts
Code
Graphical
Qty
1
3x2
2
2x2
3
2x2

►WWW.TMGINDUSTRIAL.COM P6/19 Toll Free:1-877-761-2819
Step 3 : Assemble middle trusses.
Parts
Code
Graphical
Qty
1
3x8
2A
2x8
3A
2x8

►WWW.TMGINDUSTRIAL.COM P7/19 Toll Free:1-877-761-2819
Step 4 : Connect the front truss and the 2nd truss through part (#6).
Parts
Code
Graphical
Qty
6
4

►WWW.TMGINDUSTRIAL.COM P8/19 Toll Free:1-877-761-2819
Step 5 : Connect the 3st truss and the rear truss through part (#6).
Parts
Code
Graphical
Qty
1A
8
6
32
13A
32
15A
16
15B
16

►WWW.TMGINDUSTRIAL.COM P9/19 Toll Free:1-877-761-2819
Step 6 : Assemble part (#4).
Parts
Code
Graphical
Qty
4
20

►WWW.TMGINDUSTRIAL.COM P10/19 Toll Free:1-877-761-2819
Step 7 : Foundation installation.
Parts
Code
Graphical
Qty
1
2
5
18
7
4
8
4
14
4
15
20
16
4

►WWW.TMGINDUSTRIAL.COM P11/19 Toll Free:1-877-761-2819
Step 8 : Install the door frame (#9) and (#9A).
Parts
Code
Graphical
Qty
9
1
9A
1
12
1
13A
12
15A
6
15B
6

►WWW.TMGINDUSTRIAL.COM P12/19 Toll Free:1-877-761-2819
Step 9 : Install the diagonal bracing bars (#10).
Parts
Code
Graphical
Qty
10
8
13
16
16
16

►WWW.TMGINDUSTRIAL.COM P13/19 Toll Free:1-877-761-2819
Step 10 : Install the door (#11).
Parts
Code
Graphical
Qty
11
2
17
20

►WWW.TMGINDUSTRIAL.COM P14/19 Toll Free:1-877-761-2819
Step 11 : Install the top hexagonal wire mesh.
Parts
Code
Graphical
Qty
18
1
19
100

►WWW.TMGINDUSTRIAL.COM P15/19 Toll Free:1-877-761-2819
Step 12 : Install the top hexagonal wire mesh.
Parts
Code
Graphical
Qty
18
1
19
600

►WWW.TMGINDUSTRIAL.COM P16/19 Toll Free:1-877-761-2819
Step 13 : Install the front door hexagonal wire mesh .
Parts
Code
Graphical
Qty
18
1
19
140
Note : When installing the hexagonal
mesh (#18) of the front truss, cover the
net on the front truss, and then wrap the
rope (#19) through the mesh hole to the
truss to ensure that the hexagonal mesh
is stretched and flat, and the surplus
parts at the top left and right corners are
cut off. Use self-locking nylon belt (#19)
to bind the hexagonal mesh around the
door frame position, and then separate it
with scissors.

►WWW.TMGINDUSTRIAL.COM P17/19 Toll Free:1-877-761-2819
Step 14 : Install the rear door hexagonal wire mesh.
Parts
Code
Graphical
Qty
18
1
19
60

►WWW.TMGINDUSTRIAL.COM P18/19 Toll Free:1-877-761-2819
Step 15 : Install the top cover (#21).
Parts
Code
Graphical
Qty
21
1
20
90

►WWW.TMGINDUSTRIAL.COM P19/19 Toll Free:1-877-761-2819
After the Installation
Walk around and inspect the building periodically to make sure all components are still
firmly secured and the whole building is well supported. Check all bolts and nuts as well
as all connection points to make sure they are all in good position. Check the base plates,
adjust the ropes and tie downs if required and clean the cover regularly.
Snow accumulating on the fabric cover must be removed as soon as possible. If snow
becomes solid ice on the cover, it will increase the weight on the roof and collapses the
building or reduce the life span eventually.
Keep the building on a dry ground most of the time. Do not keep the fabric dirt skirt
under water all the time, otherwise the fabric will deteriorate.
We strongly recommend you remove any snow from the roof immediately. Do not leave
any snow load on the roof overnight. Keep 3 feet of clearance on all sides at all times. Do
not allow snow to accumulate and pile up on the sides of the building. Otherwise the
push from the sides toward inside will make the building collapsed at some point.