Toro 02980 User manual

FormNo.3406-905RevA
TUVSpeedDecalKit
ModelNo.02980
InstallationInstructions
InstallingtheKit
1.Parkthemachineonalevelsurfaceandsettheparking
brake.
Figure1
2.Raisethecuttingunits.
3.Shutofftheengineandremovethekeyfromthe
switch.
WARNING
Ifyouleavethekeyintheignitionswitch,
someonecouldaccidentlystartthemachine
andseriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionswitch
beforeyoudoanymaintenance.
4.Lockthecuttingunitsintheraisedpositionusingthe
transportlatches.
5.Drill3holes(6mm)inthealuminiumsign.
6.Drill3correspondingholesoneithertherearmesh
screenofthemachineorasuitablebracketattherear
ofthemachine.
Note:Ensurethatthedrilldoesnotmakecontact
withtheradiator,theoilcooler,orthehoses.
7.Formachineswithmeshontherearofthemachine,
attachthealuminumsigntothemesh,usingthenut,
boltand(ifmountingtotherearmesh)thespacers
provided;refertoFigure2,Figure3,Figure4,Figure
5,Figure6,Figure7,andFigure8.
Important:Failingtotthespacersmayresultin
themachineoverheating.
8.ApplyaPVCsigntoeachsideoftheenginecoveror
theoperatorplatform.
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3406-905*A

Figure2
LT-3340,CT-2240,andGroundsmaster3400tractionunits
Figure3
LT-F3000tractionunit
Figure4
T4240tractionunit(rear)
Figure5
T4240tractionunit(side)
2

Figure6
Z593-Dtractionunit
Figure7
Groundsmaster5910-Dtractionunit(rear)
Figure8
Groundsmaster5910-Dtractionunit(side)
3