Toro 125-5064 User manual

FormNo.3376-352RevA
MulchingKit
30inTurfMasterWalk-BehindLawnMower
ModelNo.125-5064
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
DescriptionQty.Use
Mulchbafeassembly1
Carriagebolt(5/16x3/4inch)3
Flangelocknut(5/16inch)4
Flange-headbolt(1/4x1/2)1
Installthemulchingkit.
Nopartsrequired–Converttoside-dischargeoperation(asneeded).
InstallingtheMulchingKit
WARNING
Ifyouleavethewireonthesparkplug,someone
couldaccidentallystarttheengine.Accidental
startingoftheenginecouldseriouslyinjureyouor
otherbystanders.
Disconnectthewirefromthesparkplugbeforeyou
doanymaintenance.Setthewireasidesothatit
doesnotaccidentallycontactthesparkplug.
Note:Determinetheleftandrightsidesofthemachine
fromthenormaloperatingposition.
1.Parkthemachineonalevelsurface.
2.Makesurethatallmovingpartshavestoppedandthe
machinehascooled.
3.Removethespark-plugwirebeforestartingthese
instructions.
4.Removethegrassbagorsidedischargechutefromthe
machine,whicheveryourmachineiscurrentlyequipped
with,alongwithitshardware.
5.Tiptheunitontoitsrightside.
6.Cleanoutanygrassbuildupfromundersideofdeck.
7.Removeandretaintheowcontrolbafefromthe
frontofthedeck(Figure1)andhardware.
g021232
2
33
11
Figure1
Removingoriginalhardware
1.Nut3.Carriagebolt
2.Flowcontrolbafe
8.InstallthemulchbafeassemblyasshowninFigure2.
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3376-352*A

g021 184
1
22
3
1
4
Figure2
Installingnewhardware
1.Flangelocknut(5/16inch)3.Rear-dischargeplug
2.CarriageBolt(5/16x3/4
inch)
4.Flange-headbolt(1/4x
1/2inch)
9.Installthedischargecoverontothemachine.
Note:Youwillhaveanextrabolt,astheange-head
boltthatcomeswiththiskitwillreplaceoneofthe
boltsthatmountthedischargecovertothemachine.
10.Installtherear-dischargeplugbygripingthehandle,
raisingthereardeector,andinsertingitintothe
rear-dischargechuteuntilthelatchlocksintoplace
(Figure3).
G019812
Figure3
1.Rear-dischargeplug2.Reardeector
11.Tightenallthefasteners.
12.Carefullyplacetheunitinthenormaloperating
position.
13.Connectthespark-plugwire.
Note:Anoptionallowliftblade(P/N120-9500)maywork
betterincertainmulchingconditions.Refertothemower
operator’smanualforblademaintenance.
ConvertingtoSide-Discharge
Operation
Toconvertthemowerbacktoside-dischargeoperation,
completethefollowingprocedure:
1.Parkthemachineonalevelsurface.
2.Makesurethatallmovingpartshavestoppedandthe
sparkplugwirehasbeendisconnected.
Note:Allowtheunittocoolbeforestartingthese
instructions.
3.Removethebaggerfromtheunitifequipped.
4.Tiptheunitrearwardontoitshandle.
5.Cleanoutanygrassbuildupfromundersideofdeck.
6.Removethesidedischargecover.
7.Removethemulchbafeassemblyanditshardware.
8.Installstandardbladesiflow-liftbladeswereused.
9.Installtheowcontrolbafeanditshardware.
10.Installthesidedischargechuteanditshardware.
DANGER
Anuncovereddischargeopeningwillallow
objectstobethrowninthedirectionofthe
operatororbystanders.Also,contactwiththe
bladescouldoccur.Thrownobjectsorblade
contactcancauseseriousinjuryordeath.
Neveroperatethemachinewithoutthe
side-dischargedeectororside-discharge
chuteinplaceandworkingproperly.
11.Installthebaggerorrear-dischargeplugfromthe
machine.
WARNING
Ensurethateithertherear-dischargeplugor
thegrassbaghasbeeninstalledbeforeyou
turnonthemachine.Neverengagetheblades
withouteithertherear-dischargeplugorthe
grassbaginstalled.
2