Toro Groundsmaster 31511 User manual

FormNo.3399-118RevA
HornKit
Groundsmaster®4000or4100SeriesRotaryMower
ModelNo.31511
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
1Nopartsrequired–Preparethemachine.
Horn1
Hornswitch1
Hornbutton(rubber)1
Bolt(5/16x3/4inch)1
2
Flangenut(5/16inch)1
Installthehorn.
3Nopartsrequired–Testthehornfunction.
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Movethemachinetoalevelsurfaceandsettheparking
brake.
2.Shutoffthemachineandremovethekey.
CAUTION
Ifyouleavethekeyintheignitionswitch,
someonecouldaccidentlystarttheengineand
seriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionswitch
beforeyoudoanymaintenance.
3.Disconnectthebattery;refertoyourOperator’sManual.
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3399-118*A

2
InstallingtheHorn
Partsneededforthisprocedure:
1Horn
1Hornswitch
1Hornbutton(rubber)
1Bolt(5/16x3/4inch)
1Flangenut(5/16inch)
Procedure
1.Installthehornbrackettothetab,undertheplatform,
withabolt(5/16x3/4inch)andangenut(5/16inch)
asshowninFigure1.
Note:Rotatethehornsoitfacestowardthebackof
themachine.
g021716
1
2
3
Figure1
1.Flangenut(5/16inch)3.Bolt(5/16x3/4inch)
2.Horn
2.Insertthehornswitchthroughtheholeinthe
steering-columntower(Figure2).
g021715
12
Figure2
1.Hornswitch2.Hornbutton
3.Securethehornswitchtothetowerbythreadingon
therubberhornbutton(Figure2).
4.Locatethewire-harnessconnectorsinsidethesteering
columntower.
5.Plugthewire-harnessconnectorslabeled“horn”into
thehornandswitch.
6.Securethewireharness.
Note:Whenroutingthewires,ensurethatthe
operationofthetiltsteeringdoesnotdamagethe
harnessorpullonthewires.
7.Connectthebattery;refertoyourOperator’sManual.
3
TestingtheHornFunction
NoPartsRequired
Procedure
Conrmthatthehornsoundswhenyoupressthehorn
buttonandstopswhenyoureleaseit.
Note:Ifthehorndoesnotsound,ensurethatthe
wire-harnessconnectorsaresecure.
2