Toshiba T-Series T1000 User manual

UNINTERRUPTIBLE POWER SYSTEM (UPS)
Part # 91074-002
July 2015
Manufactured in the USA
© Copyright 2015 TOSHIBA International Corporation
All rights reserved.
T1000 Series
UPS INSTALLATION AND OPERATION
MANUAL
SINGLE PHASE - 6 KVA
Rackmount
Conguration
Tower
Conguration

bT1000 Series UPS Installation and Operation Manual – 91074-002

T1000 Series UPS Installation and Operation Manual – 91074-002
Product Use and Warranty Restrictions
The Toshiba products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, ofce equipment, measuring equipment, industrial robotics, domestic
appliances, etc.). These Toshiba products are neither intended nor warranted for usage in equipment that
requires extraordinarily high quality and/or reliability or where a malfunction or failure may cause loss
of human life or bodily injury (Unintended Usage). Unintended Usage includes atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, trafc signal instruments,
combustion control instruments, life-support equipment, all types of safety devices, etc. Unintended Usage
of Toshiba products listed in this document shall be made at the customer’s own risk.
NOTICE
PLEASE INFORM A TOSHIBA INTERNATIONAL CORPORATION REPRESENTATIVE IN
CASE OF INCONSISTENCIES, OMISSIONS, OR QUESTIONS.
The instructions contained in this manual are not intended to cover all of the details or variations in
equipment, or to provide for every possible contingency concerning installation, operation, or maintenance.
Should further information be required or if problems arise which are not covered sufciently, contact your
Toshiba sales ofce.
The contents of this instruction manual shall not become a part of or modify any prior or existing agreement,
commitment, or relationship. The sales contract contains the entire obligation of Toshiba International
Corporation/Social Infrastructure Systems Group/Power Electronics Division/UPS Business Unit, hereafter
referred to as Toshiba UPS. The warranty contained in the contract between the parties is the sole warranty
of Toshiba UPS and any statements contained herein DO NOT create new warranties or modify the existing
warranty.
Any electrical or mechanical modications to this equipment without prior written consent of Toshiba UPS
will void all warranties and may void the UL/CUL listing. Unauthorized modications can also result in
personal injury, loss of life, or destruction of the equipment.
QUALIFIED PERSONNEL ONLY
Qualied Personnel are those who have the skills and knowledge relating to the construction,
installation, operation, and maintenance of the electrical equipment and have received safety
training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety
requirements).

T1000 Series UPS Installation and Operation Manual – 91074-002
UNINTERRUPTIBLE POWER SYSTEM (UPS)
Please complete the following information and retain for your records.
Unless otherwise specied, the warranty period for the UPS or UPS part is 36 months from the shipment
date (see Toshiba International Corporation bill of lading).
Unless otherwise specied, the warranty period for a UPS battery is 24 months from the shipment date (see
Toshiba International Corporation bill of lading).
JOB NUMBER
MODEL NUMBER
SERIAL NUMBER
APPLICATION
SHIPMENT DATE
INSTALLATION DATE
INSPECTED BY

T1000 Series UPS Installation and Operation Manual – 91074-002
Purpose
This manual provides information on how to safely install your Toshiba International Corporation power
electronics product. This manual includes a section of general safety instructions that describes the warning
labels and symbols that are used throughout the manual. Read the manual completely before installing,
operating, or performing maintenance on this equipment.
This manual and the accompanying drawings should be considered a permanent part of the equipment and
should be readily available for reference and review. Dimensions shown in the manual are in metric and/or
the English customary equivalent.
Toshiba International Corporation reserves the right, without prior notice, to update information, make
product changes, or discontinue any product or service identied in this publication.
Toshiba is a registered trademark of the Toshiba Corporation. All other product or trade references appearing
in this manual are registered trademarks of their respective owners.
Toshiba International Corporation shall not be liable for direct, indirect, special, or consequential damages
resulting from the use of the information contained within this manual.
This manual is copyrighted. No part of this manual may be photocopied or reproduced in any form without
the prior written consent of Toshiba International Corporation.
© Copyright 2015 Toshiba International Corporation
All rights reserved.
Printed in the U.S.A.
Toshiba Customer Support Center
Contact the Toshiba Customer Support Center for assistance with application information or for any
problems that you may experience with your Uninterruptible Power System (UPS).
Toshiba Customer Support Center
8 a.m. to 5 p.m. (CST) – Monday through Friday
USA Toll Free [phone] – Field Service Tech Support
USA Toll Free [phone] – Pre-sales Application Support
Fax [phone]
Email: T[email protected]
You may also contact Toshiba by writing to:
TOSHIBA INTERNATIONAL CORPORATION
SOCIAL INFRASTRUCTURE SYSTEMS GROUP
POWER ELECTRONICS DIVISION - UPS
13131 West Little York Road
Houston, Texas 77041-9990
Attn: T1000 Product Manager
For further information on Toshiba products and services, please visit our website at:
www.toshiba.com/tic/industrial/uninterruptible-power-systems

fT1000 Series UPS Installation and Operation Manual – 91074-002
This page intentionally left blank.

i
T1000 Series UPS Installation and Operation Manual – 91074-002
Table of Contents
1. General Safety Instructions ........................................................................1
1.1 Symbols............................................................................................1
1.2 Signal Words ....................................................................................2
1.3 Regulatory Compliance Statement...................................................2
2. Equipment Warning Labels ........................................................................3
3. Important Safety Instructions .....................................................................5
3.1 Qualied Personnel Only..................................................................6
4. Inspection/Storage/Disposal ......................................................................7
4.1 Inspection .........................................................................................7
4.2 Unpacking.........................................................................................7
4.3 Storage .............................................................................................7
4.4 Disposal............................................................................................7
5. Installation Precautions ..............................................................................8
5.1 Conductor Routing and Grounding...................................................9
6. Installation....................................................................................................10
6.1 Module Arrangement ........................................................................10
6.2 System Installation............................................................................11
6.3 Tower Installation with Cap ...............................................................12
6.4 Rackmount Installation - Bracket Mounting Holes............................13
6.5 4-Post Rack Installation Instructions ................................................13
7. Wiring the System .......................................................................................16
7.1 Layout - Power Module ....................................................................16
7.2 Layout - Battery Module (w/ Outlet Panel) .......................................17
7.3 Layout - Transformer Module ...........................................................18
7.4 Power Module Cable Size and Tightening Torque............................18
8. Operating Precautions ................................................................................21
9. Control Panel ...............................................................................................22
9.1 Control Panel Layout ........................................................................22
9.2 Light Emitting Diodes (LED) .............................................................23
9.3 LCD Display - Open the Main Menu.................................................23
9.4 LCD Display - Menu/Sub-Menu Navigation......................................24
9.5 LCD Display - Sub-Menu/Parameter Navigation ..............................25
10. UPS Operation ...........................................................................................26
10.1 Initial Startup.................................................................................26
10.2 Startup (Normal) ...........................................................................27
10.3 Bypass..........................................................................................27
10.4 Shutdown......................................................................................28

ii T1000 Series UPS Installation and Operation Manual – 91074-002
11. System Description ...................................................................................29
11.1 Application and Use ........................................................................29
11.2 Power Backup.................................................................................29
11.3 Power Conditioning.........................................................................29
12. Operating Modes .......................................................................................30
12.1 Static-Bypass (Stop operation).......................................................30
12.2 On-Line (Run operation) ...............................................................30
12.3 Battery Backup (On batteries) ........................................................31
12.4 EPO (Emergency Power Off) Function...........................................31
12.5 Cold Start (On Batteries) ................................................................32
12.6 Frequency Conversion Mode (CVCF) ............................................32
12.7 Battery Backup Time and Discharge Process ..............................33
12.8 Battery Low Voltage Tolerances .....................................................33
12.9 Battery Recharging.........................................................................34
12.10 Battery Test...................................................................................35
13. Control Panel Menu Trees ........................................................................36
13.1 Control Panel Navigation and Menu Access...................................36
13.2 Top Menu - Sub-Menu Tree ............................................................37
13.3 Monitor Sub-Menu/Parameter Tree ................................................38
13.4 Setting Sub-Menu/Parameter Tree.................................................39
13.5 Records Sub-Menu/Parameter Tree...............................................40
14. Operation....................................................................................................41
14.1 Cold Start........................................................................................41
14.2 EPO and Remote Stop ...................................................................41
15. Communication Interfaces .......................................................................43
15.1 Remote Contacts............................................................................43
15.2 (Optional) RemotEye®Network Card..............................................44
15.3 (Optional) Google ChromeTM Browser App .....................................45
15.4 (Optional) EMD...............................................................................46
16. UPS Protection System.............................................................................47
16.1 UPS Protection Devices .................................................................47
16.2 UPS Protection Devices Fault Response ......................................47
16.3 System Fault Messages .................................................................49
16.4 System Warning Messages ............................................................50
16.5 System Mode Messages ................................................................52
16.6 System Status Messages ...............................................................53
17. Preventive Maintenance/Parts Replacement ..........................................54
17.1 Preventive Maintenance .................................................................54
17.2 LCD Display Cleaning.....................................................................54
17.3 Battery Replacement ....................................................................54

iii
T1000 Series UPS Installation and Operation Manual – 91074-002
17.4 Part Replacement...........................................................................54
18. Shipping Weights/Dimensions .................................................................55
18.1 Unit and Shipping Weights .............................................................55
18.2 Shipping Dimensions .....................................................................55
Appendix A: T1000 Specications .................................................................A-1
Appendix B: T1000 Menu Table ......................................................................B-1
Appendix C: T1000 Dimensional Drawings...................................................C-1
Appendix D: T1000 Packing Lists and Kit Contents ....................................D-1
Inter-Module Cabling Identication ..........................................................D-1
Appendix E: T1000 Optional Installation Kit Instructions ...........................E-1
E.1 Optional 3-Module Tower Cap Kit - 93178 .......................................E-1
E.2 Optional Tower Caster Kit - 90508 ...................................................E-2
E.3 Optional T1000 2-Post Rack Fixed Installation Kit - 92801..............E-5
E.4 Optional T1000 4-Post Rack Slide Installation Kit - 92800...............E-8
E.5 Optional T1000 2-Post Rack Slide Installation Kit - 90400...............E-11
Index ..................................................................................................................I-1

iv T1000 Series UPS Installation and Operation Manual – 91074-002
This page intentionally left blank.

1
T1000 Series UPS Installation and Operation Manual – 91074-002
1. General Safety Instructions
DO NOT attempt to transport, install, operate, maintain or dispose of this equipment until you have read and
understood all of the product safety information provided in this manual.
1.1 Symbols
The symbols listed below are used throughout this manual. When symbols are used in this manual they will
include important safety information that must be carefully followed.
Safety Alert Symbol indicates that a potential
personal injury hazard exists.
Prohibited Symbol indicates DO NOT take action.
Mandatory Symbol indicates that the following
instruction is required.
Ground Symbol indicates the location of the
equipment grounding conductor.
Electrical – Voltage & Shock Hazard Symbol
indicates parts inside may cause electric shock.
Explosion Hazard Symbol indicates parts may
explode.
Heavy Lift Hazard Symbol indicates object
requires two- or more man lift, or lifting aid.

2T1000 Series UPS Installation and Operation Manual – 91074-002
1.2 Signal Words
The signal words listed below are used throughout this manual. When the words DANGER, WARNING,
CAUTION and NOTICE are used in this manual they will include important safety information that must be
carefully followed.
1.3 Regulatory Compliance Statement
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the
instruction manual, it may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
Notice: The FCC regulations provide that changes or modications made to this device that are not
approved by Toshiba International Corporation may void the authority granted to the user by the FCC to
operate this equipment.
EMC Directive Class A Note
This UPS is commercial in design and not intended for use at anytime in a Residential Environment.
The word DANGER in capital letters preceded by
the safety alert symbol indicates that an imminently
hazardous situation exists, and if not avoided
will result in loss of life or serious injury to
personnel.
The word WARNING in capital letters preceded by
the safety alert symbol indicates that a potentially
hazardous situation exists, and if not avoided
may result in loss of life or serious injury to
personnel.
The word CAUTION in capital letters preceded by
the safety alert symbol indicates that a potentially
hazardous situation exists, and if not avoided may
result in minor or moderate injury.
The word NOTICE in capital letters without the safety
alert symbol indicates a potentially hazardous
situation exists, and if not avoided may result in
equipment and property damage.
NOTICE
CAUTION
WARNING
DANGER

3
T1000 Series UPS Installation and Operation Manual – 91074-002
2. Equipment Warning Labels
The following pages show examples of warning labels that may be attached to either the interior or exterior
of the Power (UPS), Battery, or Transformer Modules. Do not remove or cover any of the labels. If the
labels are damaged or if additional labels are required, contact your equipment representative for additional
labels.
These labels in both English and French are placed to provide useful information or to indicate an immi-
nently hazardous situation that may result in severe equipment/property damage, serious injury, or loss of
life if instructions are not followed.
DANGER
AC VOLTAGE
This UPS receives power from more
than one source. Disconnect all AC
sources before performing any service
or testing inside this unit
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
0.00
WARNING AREA
TEXT AREA
0.00
3.00
1.50
48082
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
MULTIPLE SOURCES
48082
FULL
BC 6-10-98
REV:
1
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
87846 10-13 JE
WLM 01-14WLM 01-14
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADUIS: VENDOR STANDARD
DANGER
Turn off and lock out all power sources.
WAIT AT LEAST FIVE (5) MINUTES
for power to dissipate, then check
voltage before servicing.
Capacitors stay charged after power
has been shut off.
Accidental contact with live parts can
cause personal injury and death.
RISK OF ELECTRIC SHOCK
57275
1.50"
3.00"
WARNING AREA
TEXT AREA
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
CAPACITORS
57275
FULL
TF 11-3-04
REV:
1
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
87862 10-13 JE
WLM 01-14WLM 01-14
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADUIS: VENDOR STANDARD
DANGER
ATTENDRE AU MOINS (5) MINUTES
pour laisser décharger les condensateurs,
puis vérifier la tension électrique avant
l´entretien.
Les condensateurs restent chargés après
coupure de l´alimentation. Tout contact
accidental avec des composants sous
tension électrique peut provoquer des
blessures ou la mort. Fermer et verrouiller
toutes les sources d´alimentation.
RISQUE DE CHOC ÉLECTRIQUE
90624
1.75"
3.00"
WARNING AREA
TEXT AREA
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
CAPACITORS-FRENCH
90624
FULL
JEE 10-11-13
REV:
0
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
WLM 11-13WLM 11-13
DANGER
TENSION AC
Cette UPS est alimentée par plus d´une
source. Débrancher toutes les sources
AC avant d´effectuer des entretiens ou
des tests à l´intérieur de cette unité.
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
0.00
WARNING AREA
TEXT AREA
0.00
3.00
1.50
90630
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
MULTIPLE SOURCES-FR
90630
FULL
JEE 10-11-13
REV:
0
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
WLM 11-13WLM 11-13
DANGER
TENSION DC
Tension DC fournie par des batteries
est encore présente après que le
matériel a été éteint et mis hors linge.
Tout contact accidentel avec des
composants sous tension peut causer
des blessures et la mort.
Débrancher toutes les sources DC
avant d´effectuer des réparations ou
des tests dans ce compartiment.
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
0.00
WARNING AREA
TEXT AREA
0.00
3.00
1.625
90632
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
DC VOLTAGE-FRENCH
90632
FULL
JEE 10-14-13
REV:
0
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
WLM 11-13WLM 11-13
FIGURE 2-1: EQUIPMENT WARNING LABELS
DANGER
DC VOLTAGE
DC Voltage supplied by batteries is still
present after equipment has been
turned off and taken off line.
Accidental contact with live parts can
cause personal injury and death.
Disconnect all DC Sources before
performing any service or testing
in this compartment.
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
0.00
WARNING AREA
TEXT AREA
0.00
3.00
1.50
43784
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
DC VOLTAGE
43784
FULL
RCM 4-11-96
REV:
1
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
87846 10-13 JE
WLM 01-14WLM 01-14
LABELS IN ENGLISH ÉTIQUETTES EN FRANÇAIS

4T1000 Series UPS Installation and Operation Manual – 91074-002
PN 90636
Le circuit de la batterie n´est pas isolé de
l´entrée AC, des tensions dangereuses
peuvent exister entre les bornes de la
batterie et la masse.
Tester le circuit avant de toucher.
CAUTION
TEXT AREA 0.75"
2.00"
Risque de choc électrique.
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
CAUTION AREA BACKGROUND COLOR: ANSI CAUTION YELLOW
CAUTION AREA TEXT COLOR: ANSI BLACK
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
ATTENTION
AREA
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
CAUTION LABEL
PLP-FRENCH
90636
2=1
JEE 10-14-13
REV:
1
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
ECO 89088 04-14 ZIR
WLM 4-07-14 WLM 04-14
PN 40760
Battery circuit is not isolated from AC input,
hazardous voltage may exist between
battery terminals and ground.
Test circuit before touching.
CAUTION
TEXT AREA 0.75"
2.00"
Risk of electrical shock.
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
CAUTION AREA BACKGROUND COLOR: ANSI CAUTION YELLOW
CAUTION AREA TEXT COLOR: ANSI BLACK
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
CAUTION
AREA
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
CAUTION LABEL
PLP
40760
2=1
VB 3-10-94
REV:
1
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
87840 10-13 JE
WLM 11-13WLM 11-13
WARNING AREA
TEXT AREA
DANGER
Des tensions dangereuses sont utilisées dans
l´opération de cet appareil et pourraient causer
des blessures graves ou des pertes de vie.
Les mesures de sécurité suivantes doivent être
observées pour réduire le risque de blessure ou de
mort.
TENSIONS DANGEREUSES
Seulement des techniciens qualifiés et familiarisés avec ce
matériel, ainsi que la documentation fournie avec elle,
devraient être autorisés à installer et à utiliser cet équipement.
L´installation de l´équipement électrique doit être effectuée
selon les normes électriques reconnues par les organismes
nationaux ou provinciaux accrédités. Une bonne mise à la
terre et un calibre de câble approprié doivent être installés
pour un fonctionnement sécuritaire.
Pendant le fonctionnement, maintenir tous les couvercles en
place et les portes de l´armoire fermées.
Lors des inspections visuelles et d´entretien, si possible,
vérifier que l´UPS soit éteinte et que l´alimentation AC est
éteninte et verrouillée.
Si des mesures sur l´appareil sous tension doivent être
effectuées, ne toucher à aucun point de connexion
électrique. Retirer tous les bijoux des poignets et des doigts.
S´assurer que l´équipement de test est en bon êtat de
fonctionnement.
.
Lors des opérations de maintenance, l´opérateur doit se tenir
sur une surface isolée non reliée à la mise à la terre.
Suivre attentivement les consignes de sécurité indiquées
dans le manuel d´opération et respecter tous les avis de
danger, les avertissements et les mises en garde. 90638
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
0.00
0.00
3.75
4.75
L´UPS et l´armoire de batterie auront des tensions
dangereuses présentes même après avoir coupé
l´alimentation AC.
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
GENERAL - UPS-FRENCH
90638
FULL
JEE 10-14-13
REV:
0
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
WLM 11-13WLM 11-13
WARNING AREA
TEXT AREA
DANGER
Hazardous voltages are used in the operation
of this equipment and could cause severe personal
injury or loss of life.
The following precautions should be observed to
reduce the risk of injury or death.
HAZARDOUS VOLTAGES
Only qualified technicians familiar with this equipment and the
information supplied with it should be permitted to install and
operate this equipment.
Installation of electrical equipment must be done in
accordance with National Electrical Code and any other state
or local codes. Proper grounding and conductor sizing must
be installed for safe operation.
During operation, keep all covers in place and cabinet
doors shut.
When performing visual inspections and maintenance, if
possible, be sure the UPS is turned off and the incoming
AC feed is turned off and locked out.
If it is necessary to make measurements with the power
on, do not touch any electrical connection points. Remove
all jewelry from wrists and fingers. Make sure test equipment
is in good, safe operating condition.
While servicing, stand on some type of insulation, and be
sure not to be grounded.
Follow the safety instructions given in the equipment manual
carefully and observe all danger, warning and caution notices.
40308
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
0.00
0.00
3.75
4.50
The UPS and Battery Cabinet will have hazardous
voltages present even after the AC feed is turned off.
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
GENERAL - UPS
40308
FULL
JK 12-29-93
REV:
1
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
87840 10-13 JE
WLM 11-13WLM 11-13
FIGURE 2-1: (CONT.) EQUIPMENT WARNING LABELS
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
DANGER AREA BACKGROUND COLOR: ANSI DANGER RED
DANGER AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
PN 90637
Risque de choc électrique.
Ne pas toucher de borne de batterie non
isolée.
0.75"
2.00"
Bornes de batteries sous tension.
DANGER
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
PLP-FRENCH
90637
2=1
JEE-10-14-13
REV:
0
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
WLM 11-13WLM 11-13
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
DANGER AREA BACKGROUND COLOR: ANSI DANGER RED
DANGER AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
PN 40759
Risk of electrical shock.
Do not touch uninsulated battery
terminal.
0.75"
2.00"
Live terminals on batteries.
DANGER
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGER LABEL
PLP
40759
2=1
VB 3-10-94
REV:
1
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
87840 10-13 JE
WLM 11-13WLM 11-13
LABELS IN ENGLISH ÉTIQUETTES EN FRANÇAIS

5
T1000 Series UPS Installation and Operation Manual – 91074-002
3. Important Safety Instructions
This manual contains important instructions that should be followed during the installation and maintenance
of the UPS and its batteries.
The T1000 Series UPS is a modular single-phase double conversion system. Each of the rackmount
modules is 3U (Three Standard Rack Units) high.
UPS systems are not equipped with an over-current protection device nor an output disconnect for the AC
output. Circuit breakers should be provided by the user between the UPS Input and utility power, and the
UPS output and the load input. This device should be rated as follows:
240/208 VAC RATING* 6 kVA
Input Breaker
240 V / 208 V 40 A
Output Breaker
240V / 208V 40 A
* Ratings are for a 80% rated device.
The nominal battery voltages for these models is as follows:
UNIT BATTERY VOLTAGE
6 kVA 216 Vdc (Nominal)
(1 string of 18 x 12V batteries)
Servicing the batteries should only be performed by a qualied factory authorized representative who is
knowledgeable about batteries and the required precautions. Keep unauthorized personnel away from
batteries. To arrange for battery replacement, contact Toshiba Customer Support Center.
1. Turn off, lockout, and tagout all equipment before connecting the power wiring to the equipment or
when performing maintenance.
2. The maximum ambient operating temperature is 104 °F (40 °C). UPS will go to Bypass when it
overheats.
3. Access panels should only be removed by authorized Toshiba eld Service personnel.
4. UPS servicing should be performed by qualied Toshiba representatives only.
5. Battery servicing should be performed by qualied Toshiba representatives only.
6. Contact your Toshiba authorized service center for battery replacement.

6T1000 Series UPS Installation and Operation Manual – 91074-002
Misuse of this equipment may result in human injury
and equipment damage. In no event will Toshiba
Corporation be responsible or liable for either
indirect or consequential damage or injury that may
result from the misuse of this equipment.
DO NOT dispose of the battery module in
a re. The batteries inside may explode.
DO NOT open or mutilate the batteries. Released
electrolyte is harmful to the eyes and skin and could
also be toxic.
To be performed by Qualied Personnel Only:
1. Verify that the UPS is off and that the power is disconnected from the power source.
2. Remove watches, rings or other metal objects.
3. Use tools with insulated handles to prevent inadvertent shorts.
4. Wear rubber safety gloves and boots.
5. DO NOT place tools or any metal parts on top of batteries.
6. Determine if the battery is inadvertently grounded. If inadvertently grounded, remove source of
ground.
Contact with any part of a grounded battery can result in
electrical shock.
The likelihood of shock will be reduced if such grounds are removed
prior to installation or maintenance.
CAUTION
CAUTION
CAUTION
WARNING
3.1 Qualied Personnel Only
Qualied personnel are those who have the skills and knowledge relating to the construction,
installation, operation, and maintenance of the electrical equipment and have received safety
training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety
requirements).
Qualied personnel shall:
1. Have read the entire operation manual.
2. Be trained and authorized to safely energize, de-energize, ground, lockout and tag circuits
and equipment, and clear faults in accordance with established safety practices.
3. Be trained in the proper care and use of protective equipment such as safety shoes, rubber
gloves, hard hats, safety glasses, face shields, ash clothing, etc., in accordance with
established safety practices.
4. Be trained in rendering rst aid.
5. Be knowledgeable about batteries and their required handling and maintenance precautions.
For further information about workplace safety visit www.osha.gov.

7
T1000 Series UPS Installation and Operation Manual – 91074-002
4. Inspection/Storage/Disposal
4.1 Inspection
Inspect for shipping damage upon receipt of the UPS. Use caution when removing the unit from the pallet.
Refer to labels or documentation attached to packing material.
4.2 Unpacking
Check the unit for loose, broken, bent or otherwise damaged parts. If damage has occurred during shipping,
keep all original crating and packing materials for return to the shipping agent. The warranty does not apply
to damage incurred during shipping. Ensure that the rated capacity and the model number specied on the
nameplate conform to the order specications.
4.3 Storage
During periods of non-use, the following guidelines are recommended for storage.
Storage Preparation
1. Power up the UPS and allow it to operate with no load for 24 hours to fully charge the
batteries.
2. Stop the unit (See Section 12.1 Bypass/Stop Operation).
3. Place the MCCB switch (Fig. 7-1 (1)) in the Off position.
Storing Conditions
• For best results, store the UPS in the original shipping container and place on a wood
or metal pallet.
• Storage temperature: -4 – 104 °F (-20 – 40 °C).
• The optimum storage temperature is 70 °F (21 °C). A higher ambient temperature will
require recharging more frequently during storage.
Avoid storage locations that:
• Are subject to extreme temperature changes or high humidity.
• Are subject to high levels of dust or metal particles.
• Are subject to excessive vibration.
• Have inclined oor surfaces.
Storage Maintenance
• If stored at an ambient temperature less than 68 °F (20 °C), recharge the batteries every
9 months.
• If stored at an ambient temperature of 68 – 86 °F (20 – 30 °C), recharge the batteries
every 6 months.
• If stored at an ambient temperature of 86 – 104 °F (30 – 40 °C), recharge the batteries
every 3 months.
4.4 Disposal
Contact your local or state environmental agency for details on disposal of electrical components and
packaging in your particular area.
It is illegal to dump lead-acid batteries in landlls or dispose of improperly.
Please help our Earth by contacting the environmental protection agencies in your area, the battery
manufacturer, or call Toshiba toll-free at [phone] for more information about recycling.

8T1000 Series UPS Installation and Operation Manual – 91074-002
5. Installation Precautions
NOTICE
1. Observe the following environmental restrictions:
• Install the unit in a well-ventilated location.
• Install the unit where the ambient temperature is within the range specied in Appendix A -
“Specications”.
• DO NOT install the UPS in areas that are subject to high humidity.
• DO NOT install the UPS in areas that allow exposure to direct sunlight.
• DO NOT install the UPS in areas that allow exposure to high levels of airborne dust, metal
particles, or ammable gases.
• DO NOT install the UPS in areas near sources of electrical noise. Ensuring a proper earth ground
will reduce the effects of electrical noise and will reduce the potential for electrical shock.
• DO NOT install the UPS in areas that would allow uids or any foreign object to get inside the
UPS.
2. Install the unit in a stable, level and upright position that is free of excessive vibration.
3. Follow the instructions on the unpacking label afxed to the exterior of the UPS.
4. Tower Unit with Caster Kit Option Only: Once the installation is complete, screw down the UPS
leveling feet located next to the front and back casters, until the unit is no longer resting on the
casters.
5. The UPS generates and can radiate radio-frequency energy during operation. Although RFI noise
lters are installed inside of the unit, there is no guarantee that the UPS will not inuence some
sensitive devices that are operating near by. If such interference is experienced, the UPS should be
installed farther away from the affected equipment and/or powered from a different source than that
of the affected equipment.
6. It is the responsibility of the installer of this equipment to provide a suitable disconnect for the Control
Panel supplying power to this equipment.
This disconnect must:
Be suitable for the Voltage and Full Load Ampere Rating of all downstream equipment supplied by
the Panel;
The supply disconnecting device shall be one of the following types:
• Switch-disconnect, with or without fuses, in accordance with IEC 60947-3, utilization category
AC-23B or DC-23B
• As above, except one that has an auxiliary contact that in all cases causes switching devices
to break the load circuit before the opening of the main contacts of the disconnect.
• A circuit breaker suitable as an isolation device per IEC 60947-2
• Any other switching device in accordance with an IEC product standard that also meets the
isolation requirements of IEC 60947-1 and is appropriate for on-load switching of motors or
other inductive loads;
Be approved for use as a disconnect for the country in which this equipment is installed.
Be provided with a Lock Out Tag Out capability in the Off (Down) position.

9
T1000 Series UPS Installation and Operation Manual – 91074-002
7. Allow 5 minutes after power is removed for internal capacitors to fully discharge before attempting
to service the unit.
8. The user should provide output over-current protection for hardwired UPS systems. See “Appendix
A: T1000 Specications” on page A-1A-2 for the device rating.
9. After ensuring that all power sources are turned off and isolated in accordance with established
lockout/tagout procedures, connect the power source wiring of the correct voltage to the input
terminals of the UPS.
10. Hardwire Only: Connect the output terminals of the UPS to the load in line with local wiring
regulations. Size the branch circuit conductors in accordance with NEC Table 310.16.
5.1 Conductor Routing and Grounding
1. Use separate metal conduits for routing the input power, output power, and control circuits.
2. Follow the wire size and tightening torque specications listed on Table 7-4.
3. Always ground the unit to reduce the potential for electrical shock and to help reduce electrical
noise.
4. A separate ground cable should be run inside the conduit with the input power, output power, and
control circuits.
WARNING
METAL OF CONDUIT IS NOT AN ACCEPTABLE GROUND.

10 T1000 Series UPS Installation and Operation Manual – 91074-002
6. Installation
6.1 Module Arrangement
The T1000 Series UPS consists of a Power (UPS) module, optional Battery module(s), and optional
Transformer module for output other than 240/208 V. These modules can be purchased in either a rack-
mount or tower conguration.
Module arrangement is determined by the length of the factory-supplied inter-module cables. The Mod-
ules should be arranged in the following order as viewed from the front: top-to-bottom for Rackmount
(Fig. 6-1, Fig. 6-2); left-to-right for Tower (Fig. 6-3, Fig. 6-4).
NOTE: If a Transformer module is used, then the battery module(s) may, or may not, have an output
panel.
FIGURE 6-1: RACKMOUNT 240VOUT
SYSTEM WITH C-13/C-19 PANEL
OUTPUT 240VAC 10A
OUTPUT 240VAC 15A
10A
10A 15A
15A
CN12A CN12B
CN12A CN12B
REAR VIEW
POWER
MODULE
BATTERY
MODULE 2
BATTERY
MODULE 1
FIGURE 6-2: RACKMOUNT 120VOUT SYS-
TEM WITH TRANSFORMER MODULE
CN12A CN12B
CN12A CN12B
REAR VIEW
POWER
MODULE
BATTERY
MODULE 2
BATTERY
MODULE 1
TRANS-
FORMER
MODULE
FIGURE 6-3: TOWER 240VOUT
SYSTEM WITH C-13/C-19 PANEL
OUTPUT 240VAC 10A
OUTPUT 240VAC 15A
10A
10A 15A
15A
CN12A CN12B
CN12A CN12B
POWER
MODULE
BATTERY
MODULE 2
BATTERY
MODULE 1
REAR VIEW
FIGURE 6-4: TOWER 120VOUT SYSTEM
WITH TRANSFORMER MODULE
CN12A CN12B CN12A CN12B
REAR VIEW
POWER
MODULE
BATTERY
MODULE 2
BATTERY
MODULE 1
TRANS-
FORMER
MODULE