TriBrer AOP100T User manual

Optical PowerMeter
USER'S GUIDE
EnglishEnglish

1
WARNINGWARNING
You arecautioned that changesor modifications notespressly
approved in thisdocument could voidyout authority tooperate this
equipment.
Toreduce the risk of fire or electric shock,do not expose this
apparatus to rainor moisture.
Toavoid electrical shock, do not open the cabinet. Refer servicing
to qualified personnelonly.
NOTENOTE
As thelaser is harmfulto the eyes,do not attemptto disassemble
the cabinet.
CALSS I LASERPRODUCT
Precautions for Use
Avoiding condensation problems
As muchas possible, avoidsudden temperature changes.Do not
attempt to use thedrive immediately after movingit from a coldto a
warm location, toraising the roomtemperature suddenly,as
condensation may formwith in thedrive. If thetemperature changes
suddenly while usingthe drive,
Stop using itand take outbatteries for atleast an hour.
Storage
When long timeno use,must takeout the batteriesto avoid
destroying the device.
Use batteries
At the sametime, can not usedifferent style ordifferent capacitance
batteries.
And only chargethe rechargeable batteries.

Host
Bag
2
FC/SC Adapter
Manual
Optional
Chargeing
Standard
REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
USER'S GUIDE
EnglishEnglish
Handheld measuring instrument
Optical power meter
Optical laser source
Optical mulit meter
EnglishEnglish
EnglishEnglish

1
3
4
2
7
3
5
6
USB
8
9
10
3-LCD
2-OPM connector
1-VFL connector
4-OPM wavelength shift key
5-VFL on/offkey
6-Reference set/check key
7-Unit shift key
8-USB
9- ( )Power key Backlight key
10-Data Save/Recall key
Description
REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS

1.Press and pushdown 2.Open the lid
3.Place the batteries 4.Place the batteries
4
Set batteries

REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
5
PERM
Power on/off, auto power off
Press the Powerkey to turn on the devicewith auto
power off. After 10 minutesno key pressed,it will auto
power off.
Press Power keyfor 2 seconds when turn onthe
device, the autopower off will be cancelled,and the LCD
will show PERM .
Also press itfor 2 seconds to shut thedevice.

REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
6
>2s PERM
Backlight
When the devicepower on, press the power key
to turn onor turn offthe backlight.

REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
7
Wavelength select
When testing, youmust select the right wavelength.
Press the key for shiftingthe wavelength from:
850nm,1300nm,1310nm,1490nm,1550nm,1625nm

REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
8
dBm
mW
nW
Unit select
Unit
Press the key for shiftingthe unit from:dBm,
mW/uW, dB.
mW/uW: 1mW=1000uW,1uW=1000nW
dBm: (dBm)=10*log(mW)
dB: (dB)=dBm-REF
Unit

REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
9
REF
Reference
Press key to checkthe reference value
you set lasttime.
And ifkeep pressing for 2 seconds, youcan store the
current dBm asa new reference value. Then it automatically
shift to dB.
dB=dBm-REF
You can store theREF value for each wave.
REF
REF

REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
10
Save
Data Storage
When in testinginterface, user can press
key . Andpress the
key for 2seconds .
to the Historyinterface
to save currentvalue
SAVE
SAVE
Save

REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
11
GLINT
VLS
The device canbuild in aoptional VFL module, press
the VFL key to shiftthe conditions: on-> glint->off
Visual Fault Locator (optional)
VFL

REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
12
Battery energy detect
Remain80%---100%
Remain40%---80%
Remain20%---40%
Remain less than20%
If the energyis too low, the beepwill be on and device
will auto poweroff.

13
5V_500mA
First you mustuse the rechargeable batteries. When
the energy isless than 20%, you should charge the
batteries.
Long time lowenergy, thelife of the batteries will be
short. When charging,the battery indication on LCD
will flash.After charging fully, the indicationwill stop
flashing and showfull. Don't charge for more than 24 hours.
If charging whileusing the device, the time will be longer.
The rechargeable batteriesmust be indevice when you
use theAC/DC adaptor for charging. And do not charge
the non-rechargeable batteries,or the device will be
destroyed and alsolose theguarantee.
Battery charge
REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS

14
Data Storage
T
-70~+10dBm -60~+18dBm -50~+26dBm
850nm,1300nm,1310nm,1490nm,1550nm,1625nm
+6~-60dBm(0.01dB)
-60~-70dBm(0.1dB)
+16~-50dBm(0.01dB)
-50~-60dBm(0.1dB)
+26~-40dBm(0.01dB)
-40~-50dBm(0.1dB)
0.2dB
2%
InGaAs
FC(or SC) & 2.5mm UPP
Yes
650nm
1mW or 10mW
yes
AAX2
>160H
-10 ~ +50 ,<90%RH
-20 ~ +60 ,<90%RH
MC
Measuring range
Calibrated
wavelengths
Resolution
Connector
Accuracy
Linearity
PD Type
Auto power off
Operating temp
Storage temp
Power supply
170mm*97mm*38mm
Size(H*W*D)
About 380g
Weight
Battery life
VFL part
Wavelength
Output power
Detailed
Connector 2.5mm UPP