TriBrer AOU400 User manual

Optical Multi Meter
USER'S GUIDE
EnglishEnglish

1
WARNINGWARNING
You arecautioned that changesor modifications notespressly
approved in thisdocument could voidyout authority tooperate this
equipment.
Toreduce the risk of fire or electric shock,do not expose this
apparatus to rainor moisture.
Toavoid electrical shock, do not open the cabinet. Refer servicing
to qualified personnelonly.
NOTENOTE
As thelaser is harmfulto the eyes,do not attemptto disassemble
the cabinet.
CALSS I LASERPRODUCT
Precautions for Use
Avoiding condensation problems
As muchas possible, avoidsudden temperature changes.Do not
attempt to use thedrive immediately after movingit from a coldto a
warm location, toraising the roomtemperature suddenly,as
condensation may formwith in thedrive. If thetemperature changes
suddenly while usingthe drive,
Stop using itand take outbatteries for atleast an hour.
Storage
When long timeno use,must takeout the batteriesto avoid
destroying the device.
Use batteries
At the sametime, can not usedifferent style ordifferent capacitance
batteries.
And only chargethe rechargeable batteries.

2
Host
Bag
FC/SC Adapter
Manual
Optional
Chargeing
Standard
dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
USER'S GUIDE
EnglishEnglish
Handheld measuring instrument
Optical power meter
Optical laser source
Optical mulit meter
EnglishEnglish
EnglishEnglish

3
1
3
4
2
7
5
6
USB
8
9
10
3-LCD
2-OPM connector
1-VFL connector
4-OPM wavelength shiftkey
5-VFL on/offkey
6-Unit shift key
7-Reference set/check key
9-Laser source wavelength shift key
10-Laser Source connector
11- USB
12-Power key(Backlight key)
13-Data Save/Recall key
14-Laser source on/off key
11
12
13
14
8-Laser source modulationkey
Description
dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM

4
1.Press and pushdown 2.Open the lid
3.Place the batteries 4.Place the batteries
Set batteries

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
5
PERM
Power on/off, auto power off
Press the Powerkey to turn on the devicewith auto
power off. After 10 minutesno key pressed,it will auto
power off.
Press Power keyfor 2 seconds when turn onthe
device, the autopower off will be cancelled,and the LCD
will show PERM .
Also press itfor 2 seconds to shut thedevice.

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
6
>2s PERM
Backlight
When the devicepower on, press the power key
to turn onor turn off the backlight.

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
7
Wavelength select
When testing, youmust select the right wavelength.
Press the key for shiftingthe wavelength from:
850nm,1300nm,1310nm,1490nm,1550nm,1625nm

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
8
dBm
mW
nW
Unit select
Unit
Press the key for shiftingthe unit from:dBm,
mW/uW, dB.
mW/uW: 1mW=1000uW,1uW=1000nW
dBm: (dBm)=10*log(mW)
dB: (dB)=dBm-REF
Unit

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
9
REF
Reference
Press key to checkthe reference value
you set lasttime.
And ifkeep pressing for 2 seconds, youcan store the
current dBm asa new reference value. Then it automatically
shift to dB.
dB=dBm-REF
You can store theREF value for each wave.
REF
REF

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
10
Save
Data Storage
When in testinginterface, user can press
key . Andpress the
key for 2seconds .
to the Historyinterface
to save currentvalue
SAVE
SAVE
Save

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
11
Laser source on/off
Press the keyto turn on/off the laser source
output
Laser
ON

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
12
850nm 1300nm
1310nm 1490nm
1550nm 1625nm
Wavelength select
Press the key to shiftthe wavelength.

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
13
1KHz
2KHz
270Hz
Frequency select
Press the key to shiftfrom CW, 270Hz, 1KHz,
2KHz.
MOD
MOD

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
14
GLINT
VLS
The device canbuild in aoptional VFL module, press
the VFL key to shiftthe conditions: on-> glint->off
Visual Fault Locator (optional)
VFL

dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM
15
Battery energy detect
Remain80%---100%
Remain40%---80%
Remain20%---40%
Remain less than20%
If the energyis too low, the beepwill be on and device
will auto poweroff.

16
5V_500mA
First you mustuse the rechargeable batteries. When
the energy isless than 20%, you should charge the
batteries.
Long time lowenergy, thelife of the batteries will be
short. When charging,the battery indication on LCD
will flash.After charging fully, the indicationwill stop
flashing and showfull. Don't charge for more than 24 hours.
If charging whileusing the device, the time will be longer.
The rechargeable batteriesmust be indevice when you
use theAC/DC adaptor for charging. And do not charge
the non-rechargeable batteries,or the device will be
destroyed and alsolose theguarantee.
Battery charge
dBm
2KHz
PERM
nm
REF
Save
1310nm
1KHz
GLINT
VLS
MOD
REF
Unit
Save
Laser
ON
VFL
Optical Mulit Meter
>2s PERM

17
-70~+10dBm -60~+18dBm -50~+26dBm
850nm,1300nm,1310nm,1490nm,1550nm,1625nm
+6~-60dBm(0.01dB)
-60~-70dBm(0.1dB)
+16~-50dBm(0.01dB)
-50~-60dBm(0.1dB)
+26~-40dBm(0.01dB)
-40~-50dBm(0.1dB)
0.2dB
2%
InGaAs
850nm,1300nm,1310nm,1550nm@10nm
1490nm,1625nm@5nm
850nm>-10dBm
1300nm,1310nm,1550nm,1490nm,1625nm>-6dBm
850nm,1300nm,1310nm,1550nm@FP
1490nm,1625nm@DFB
Detailed
TMC
1~3 wavelengths of 850/1300/1310/1490/1550/1625
FC/PC or customize
Connector
Wavelength
Spectral width
Output power
Laser type
270Hz/1KHz/2KHz
Frequency
Data Storage
Measuring range
Calibrated
wavelengths
Resolution
Connector
Accuracy
Linearity
PD Type
VFL part
650nm
Wavelength
FC (or SC) & 2.5mm UPP
Yes
Output power 1mW or 10mW

18
>50H
Operating temp
Storage temp
170mm*97mm*38mm
Size(H*W*D)
About 380g
Weight
Power supply
Battery life
AAX2
Detailed
-10 ~ +50 ,<90%RH
-20 ~ +60 ,<90%RH