Trinity TBFC-0907 User manual

OWNER’S MANUAL
TRINITY ECOSTORAGE™ 6-TIER NSF 48” x 18” x 72”
WIRE SHELVING RACK w/WHEELS –CHROME
Model # TBFC-0907
Everything in its place.®

© 2016 TRINITY - 800.985.5506
Your TRINITY EcoStorage™ 6-Tier NSF Wire Shelving Rack w/Wheels should include the
following parts. Please inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact
TRINITY Customer Service: 800.985.5506 or [e-mail]. Parts can also be
requested online at www.trinityii.com (Help & More, Contact Us).
You will need no additional tools for assembly.
PARTS LIST
SHELF (6)
CASTER (w/wrench)
(2 locking, 2 non-locking)
For mobile option
SLIP SLEEVE (48)
FEET LEVELER (4)
For stationary option
Please inspect box contents to ensure you have received all components.
Note: The black circular plastic tops in between the Shelves are used only for packaging
purposes. They are NOT NEEDED. Please discard.
CAUTION: Failure to follow these guidelines may result in property damage or personal injury.
Each Shelf holds up to 800 lb with equal weight distribution on Feet Levelers (without Casters).
Each Shelf holds up to 100 lb with equal weight distribution on locked Casters.
BACKSTAND (6)
THREADED INSERT (4)
Used if making (2) 3-Tier Racks
END CAP (4)
Used if making (2) 3-Tier Racks
TOP POLE (4)
End Cap (4) and
Pole Connector (4)
are pre-installed
BOTTOM POLE (4)
Threaded Insert (4)
is pre-installed
1
ABCD
EFG H
I

A (4)
© 2016 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
2
STEP 2: SLIP SLEEVES
Screw each FEET LEVELER (G) into the
bottom of each BOTTOM POLE (A). Turn
clockwise to screw in place.
STEP 1: Mobile Option
Screw each CASTER (F) into the bottom of
each BOTTOM POLE (A). Turn clockwise to
screw in place. Make sure the Locking Casters
are on the same side.
Use the provided caster wrench to tighten
completely. Failure to do as instructed
could result in the caster stem breaking.
For easiest assembly, do not attach the TOP (B) and
BOTTOM (A) POLES until instructed. Once
connected, these will be the posts for the Rack.
Note that each POLE (A+B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D)
has raised horizontal lines inside designed to lock
them in place on the POLE (A+B).
On the BOTTOM POLE (A), place 1 pair of SLIP
SLEEVES (D) at the desired level. Please make
sure the arrow faces up and that the word “TOP” is
right side up. Do this for each BOTTOM POLE (A)
and make sure that the heights are identical for
BOTTOM POLE (A).
Slide the pair of SLIP SLEEVES (D) until you hear a
click to confirm the pair is locked onto the BOTTOM
POLE (A). DO NOT place more than one pair on
each POLE (A) at a time.
STEP 1: Stationary Option
A (4) D (8)
F(4) G(4)
* For safety and stability, the lowest SHELF (C) should be lower than the 3rd notch from the bottom.
** Note: There will be a very small gap in-between the SLIP SLEEVES (D)—this is normal.

© 2016 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
3
STEP 3: INSTALLING BOTTOM SHELF
Place SHELF (C) on its side and slide the (4) BOTTOM
POLES (A) through the holes in the SHELF (C). Make
sure that the SHELF (C) corner cylinders are positioned
over the SLIP SLEEVES (D).
Stand the unit upright.
*Note: The level side of the SHELF (C) is the TOP side
(the TRINITY logo on the corner cylinders should be right-
side up.)
**Use a rubber mallet, if needed, to secure the SHELF (C).
***For convenience, place BOTTOM POLES (A) with
Locking Casters on the long side of the shelf if the rack will
be pushed against a wall OR if the rack is frequently rolled
around like a cart place BOTTOM POLES (A) with Locking
Casters on the side being pushed or pulled.
C (1)
STEP 4: INSTALLING SHELVES
On POLE (A), place 1 pair of SLIP SLEEVES (E) at the
desired distance between SHELVES (C). Please make
sure the arrow faces up and that the word “TOP” is right
side up. Do this for each POLE (A), and make sure that
the heights are identical for each POLE (A).
Lower SHELF (C) over the BOTTOM POLES (A) so that
the corner cylinders of the SHELF (C) are positioned
over the SLIP SLEEVES (D).
Repeat Step 4 to install other SHELVES (C) as desired.
**Use a rubber mallet, if needed, to secure the
SHELVES (C).
D (8) C (1)

ASSEMBLY INSTRUCTIONS
STEP 6: INSTALLING SHELVES
© 2016 TRINITY - 800.985.5506 4
D (32) C (4)
Screw the TOP POLE (B) into the BOTTOM
POLE (A). The tops of these poles are
indicated by the BLACK END CAP.
STEP 5: INSTALLING TOP POLES
B (4)
On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at
the desired distance between SHELVES (C). Please
make sure the arrow faces up and that the word “TOP”
is right side up. Do this for each POLE (A+B), and make
sure that the heights are identical for each POLE (A+B).
Lower SHELF (C) over the TOP POLES (B) so that the
corner cylinders of the SHELF (C) are positioned over
the SLIP SLEEVES (D).
Repeat Step 6 to install other SHELVES (C) as desired.
**Use a rubber mallet, if needed, to secure the
SHELVES (C).

5© 2016 TRINITY - 800.985.5506
Center the BACKSTAND (E) along
the back of the SHELF (C). Insert
the bent foot of one end of the
BACKSTAND (E) and anchor on the
inside of the back wire of the
SHELF (C). Once the bent foot is
inside the back wire, pull
BACKSTAND (E) out, away from
the Rack until the straight foot locks
on the outside of the back wire.
Repeat for the 2 other BACKSTAND
(E) anchors.
STEP 7: INSTALLING BACKSTANDS
OPTION 2: TWO RACKS –3 TIERS HIGH
Screw THREADED INSERTS (I)
into the bottom of each TOP POLE
(B). Push in END CAPS (H) into the
top of each BOTTOM POLE (A).
Repeat Steps 1, 2, 3, 4, and 7.
E (6)
ASSEMBLY INSTRUCTIONS
I (4) H (4)

© 2016 TRINITY - 800.985.5506 6
TRINITY Customer Service provides the following replacement parts:
SERVICE PARTS LIST –TBFC-0907
Part Number Description Part Number Description
1) XBK-01-011-2543 Slip Sleeve 7) XBK-98-003-2538 Feet Leveler
2) ZSV-04-006-3600 Top Pole 8) ZSV-99-007-4010 Non-locking Caster
3) ZSV-01-013-2523 Pole Connector 9) XXX-97-002-0001 Wrench
4) ZSV-04-008-3600 Bottom Pole 10) ZSV-02-006-0001 Back Stand
5) ZSV-99-008-4010 Locking Caster 11) ZSV-03-007-4818 Shelf
6) ZSV-01-014-2513 Threaded Insert 12) XBK-23-004-2517 Endcap
2
1
3
4
5
7
9
8
10
11
6
12

WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result
in injury and/or damage.
2. Use the provided caster wrench to tighten casters completely. Failure to do as
instructed could result in the caster stem breaking thereby causing the shelving rack
to collapse.
3. The warnings, cautions, and instructions discussed in this manual cannot
cover all possible conditions or situations that may occur. The user must
always be aware of their environment and ensure that they use the product in a safe
and responsible manner.
4. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
5. Check for damaged parts.Before using this product, carefully check that all parts
are in good condition, and that the product will operate properly and perform its
intended function. Check for damaged parts and any other conditions that may affect
the operation of this product. Replace damaged or worn parts, and never use this
product with a damaged part.
6. Do NOT overload the product.
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals
•This item is not certified for outdoor use
Weight capacity per Shelf on Feet Levelers
(6-tier) 800 lb (evenly distributed)
Weight capacity per Shelf on Casters
(6-tier) 100 lb (evenly distributed)
Weight capacity per Shelf on Feet Levelers
(3-tier) 800 lb (evenly distributed)
Weight capacity per Shelf on Casters
(3-tier) 265 lb (evenly distributed)
Total weight capacity of 6-Tier Shelving Rack
(evenly distributed) 4800 lb (on Feet Levelers) 800 lb (on Casters)
Total weight capacity of 3-Tier Shelving Rack
(evenly distributed) 2400 lb (on Feet Levelers) 800 lb (on Casters)
7© 2016 TRINITY - 800.985.5506

Thank you for purchasing a TRINITY EcoStorage™ 6-Tier NSF Wire Shelving Rack w/Wheels.
In order to register your product and receive streamlined customer service, please fill out the
following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the
Product Registration Form online at www.trinityii.com or (3) scan and email the form to
[e-mail]. Include a copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TBFC-0907 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
© 2016 TRINITY - 800.985.5506 8

© 2016 TRINITY - 800.985.5506
9