Trinity TWE-11012 User manual

OWNER’S MANUAL
TRINITY CHROME SWIVEL STOOL
Model # TWE-1101 / TWE-11012
Important / Important / Importante
FOR 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D
PARA INSTRUCCIONES DE ENSAMBLAJE EN 3D
Intelligent Instructions
Directives intelligentes
Instrucciones Inteligentes
DOWNLOAD THE FREEAPP | TÉLÉCHARGERL’APPLICATION GRATUITE| DESCARGUE LA APLICACIÓN GRATUITA

PARTS LIST
Your TRINITY Chrome Swivel Stool should include the following parts. Please inspect box contents to
ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online
via our “Contact Us” section at www.trinityii.com.
All tools required for assembly are included.
A
STOOL LEG (1)
B
STOOL LEG
w/ flat center (1)
C
STOOL FEET (4)
D
FEET LEVELER (4)
E
LARGE RING (1)
F
SMALL RING (1)
G
1/4" * 1-1/4"
SCREW (9)
H
1/4" * 5/8”
CAP NUT (4)
I
NUT (5)
J
WASHER (5)
K
BASE PLATE (1)
L
1/4" * 1-3/4"
SCREW (4)
1© 2023 TRINITY - 800.985.5506

PARTS LIST
M
SPACER (4)
N
SEAT (1)
O
SEAT RING (1)
P
3/16" * 1/2"
SCREW (4)
Q
1/4" * 3/4"
SCREW (4)
R
HEX KEY (1)
S
WRENCH (1)
© 2023 TRINITY - 800.985.5506 2

ASSEMBLY INSTRUCTIONS
STEP 1
Put STOOL LEG (A) on top of STOOL LEG
(B), fasten with SCREW (G) from top and
WASHER (J) and NUT (I) from bottom.
Note: STOOL LEG (B) has flat center on
top.
Only hand tighten SCREW (G). Do not
fully tighten until finished Step 2.
A
B
G
J
I
STEP 2
Once STOOL LEGS (A + B) are secured, turn legs
upside down and hammer in STOOL FEET (C). Screw
in FEET LEVELERS (D) into STOOL FEET (C).
Turn legs right side up. Place LARGE RING (E)
around STOOL LEGS (A+B) and slide into place. Align
holes on LARGE RING (E) with holes on legs, tighten
with SCREW (G) from inside and CAP NUT (H) from
outside.
Place SMALL RIGN (F) to inside of legs. Align holes
on SMALL RING (F) with holes on legs, tighten with
SCREW (G) from inside.
Hand tighten ALL SCREWS first to
ensure easy of alignment. Fully tighten
ALL SCREWS with HEX KEY.
C
E
D
G
F
H
G
3© 2023 TRINITY - 800.985.5506

ASSEMBLY INSTRUCTIONS
STEP 3
Take out BASE PLATE (K) and turn top so
that top and bottom are at a 45 degree
angle. Put BASE PLATE (K) on legs. Insert
SPACER (M) between BASE PLATE (K) and
legs. Tighten with SCREW (L) from top,
and WASHER (J) and NUT (I) from bottom.
K
L
R
L
M
K
I
J
S
STEP 4
Attach SEAT RING (O) to SEAT (N) with
SCREW (P). Center SEAT RING (O) by
aligning holes on SEAT RING (O) with
white dots on SEAT (N).
Lay SEAT (N) on ground and attach legs
while stool is upside down. Attach BASE
PLATE (K) to SEAT (N) with SCREW (Q).
Ensure all screws are tightened.
P
O
N
Q
© 2023 TRINITY - 800.985.5506 4

SERVICE PARTS LIST –TWE-1101 / TWE-11012
TRINITY Customer Service provides the following replacement parts:
Part Number Description Part Number Description
1) XBK-25-001-0002 Stool Seat 5) CSV-25-002-0005 Small Ring
2) CSV-25-001-0003 Seat Ring 6) CSV-25-002-0004 Large Ring
3) CSV-25-002-0002 Stool Leg 7) ZSV-02-013-0001 Base Plate
4) CSV-25-002-0003 Stool Leg 8) ZSV-02-011-0003 Hardware Kit
5
3
1
4
6
7
8
2
5© 2023 TRINITY - 800.985.5506

WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
3. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product. Any
modifications will void warranty.
4. Check for damaged parts. Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
5. Do NOT overload the product.
6. Do NOT allow children to climb or play around the product. Tipping may occur causing
injury.
7. Do NOT stand or lean on the product or use this product as a step ladder. Tipping may
occur causing injury.
8. Only use the product on an even and stable surface.
9. Do NOT leave knifes or sharp objects on the seat unattended.
Total weight capacity per stool 300 lb
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
•Wipe with a dry cloth as needed to remove dust and dirt.
•Do not use metal scouring pad for cleaning. Most stains can be removed by using a mild
soap and a soft-bristled brush.
•Avoid placing any direct heat source on or near seat.
•This product is designed for indoor use only. Outdoor use is not recommended.
© 2023 TRINITY - 800.985.5506 6

© 2023 TRINITY - 800.985.5506
7

PRODUCT REGISTRATION
Thank you for purchasing a TRINITY Chrome Swivel Stool. In order to register your product and receive
streamlined customer service, please fill out the following Product Registration Form and (1) fax the
form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3)
scan and email the form to [e-mail]. Include a copy of your original receipt with
your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
© 2023 TRINITY - 800.985.5506 8

© 2023 TRINITY - 800.985.5506
9