Trinity TXK-0805 User manual

OWNER’S MANUAL
OWNER’S MANUAL
TRINITY 100 QT DETACHABLE STAINLESS STEEL
COOLER W/ SHELF
Model # TXK-0805
Important / Important / Importante
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES
PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D
Intelligent Instructions
Directives intelligentes
Instrucciones Inteligentes
DOWNLOAD THE FREEAPP | TÉLÉCHARGERL’APPLICATION GRATUITE| DESCARGUE LA APLICACIÓN GRATUITA

PARTS LIST
Your TRINITY Stainless Steel Cooler should include the following parts. Please inspect box contents to
ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online
via “Contact Us” section at www.trinityii.com.
You will need a Phillips screwdriver for assembly which is not provided.
A
TUB (1)
B
LID (1)
C
SHELF (1)
D
FRAME (2)
E
SMALL
SCREW (2)
F
HANDLE (2)
G
LARGE
SCREW (12)
H
CAP CATCHER (1)
I
BOTTLE
OPENER (1)
J
DRAIN PLUG (1)
K
LOCKING
CASTER (2)
L
NON-LOCKING
CASTER (2)
M
WRENCH (1)
1© 2020 TRINITY - 800.985.5506

ASSEMBLY INSTRUCTIONS
STEP 1
Place FRAMES (D) upside down with black
circular receivers on the floor and
approximately SHELF (C) width apart.
Align holes in SHELF (C) with bottom of FRAME
(D), making sure SHELF Lip is facing downwards.
Screw LOCKING CASTERS (K) into bottom of
FRAMES (D), securing SHELF (C) in-between.
Please make sure LOCKING CASTERS (K) are
installed on same side.
Screw NON-LOCKING CASTERS (L) into bottom
of FRAME (D), securing SHELF (C) in-between.
Tighten all CASTERS (K, L) with provided
WRENCH (M).
Use provided caster wrench to tighten
completely. Failure to do as instructed could
result in caster stem breaking.
K
C
L
M
D
STEP 2
Align HANDLES (F) on each side of TUB (A).
Attach HANDLES (F) with LARGE SCREWS (G).
Make sure to tighten securely.
HANDLES (F) can be attached either angled
up or down based on your preference.
F
A
G
© 2020 TRINITY - 800.985.5506 2

ASSEMBLY INSTRUCTIONS
STEP 3
Attach CAP CATCHER (H) to TUB (A) by sliding it
downward, over metal notch. Attach BOTTLE
OPENER (I) to TUB (A) using SMALL SCREWS (E).
E
I
H
STEP 4
Unscrew DRAIN PLUG (J) assembly. Insert
DRAIN PLUG (J) through the opening in
TUB (A) from inside. Make sure rubber seal
is on the inside of TUB (A).
From outside, slide washer on first, then
the second washer with chain attached,
and then screw on nut. Be sure not to
overtighten. Once DRAIN PLUG (J) is in
place, screw on cap.
J
Outside the tub
Inside the tub
3© 2020 TRINITY - 800.985.5506

ASSEMBLY INSTRUCTIONS
STEP 5
Carefully turn Cart right-side
up. Set TUB (A) on top of Cart.
Make sure tub feet sit securely
inside receivers on top of
FRAME (D).
STEP 6
Set LID (B) on top of TUB (A).
Clean the inside of the Cooler
thoroughly before use.
B
© 2020 TRINITY - 800.985.5506 4

SERVICE PARTS LIST –TXK-0805
TRINITY Customer Service provides the following replacement parts:
Part Number Description Part Number Description
1) PBR-17-002-3317 Cooler Lid 10) ZSV-99-011-3010 Non-Locking Caster
2) AMA-05-005-0150 Lid Knob 11) XXX-97-002-0007 Wrench
3) XSV-01-010-0530 Knob Screw 12) PBR-03-028-3116 Shelf
4) XST-18-015-3317 Cooler Tub 13) PBR-14-015-1717 Frame
5) XST-02-004-0001 Bottle Opener 14) XSV-01-033-0415 Receiver Screw
6) XST-02-005-0002 Cap Catcher 15) CGL-02-003-0001 Drain Plug
7) XBK-98-009-4818 Tub Foot 16) XSV-01-010-0416 Small Screw
8) XBK-02-019-0001 Plastic Receiver 17) XSV-05-001-0675 Handle
9) ZSV-99-012-3010 Locking Caster
18)
XSV-01-010-0615 Large Screw
5© 2020 TRINITY - 800.985.5506

WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
3. Use the provided caster wrench to tighten completely. Failure to do as instructed could
result in the caster stem breaking thereby causing the cooler to collapse.
4. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product. Any
modifications will void product warranty.
5. Check for damaged parts. Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a
damaged part.
6. Lift cooler tub by side handles ONLY.
7. Do NOT let children climb or play in the tub or on the shelf.
8. Do NOT overload the product.
9. Lock the casters when leaving cooler in stationary position.
10. Ensure cooler tub is securely fastened to the leg frames before moving the cooler cart.
11. Do NOT push cooler with cart on uneven surface. Cooler tub may detach from the cart.
Volume Capacity 25 gallons / 100 qt
Weight capacity per shelf (evenly distributed) 50 lb
Total weight capacity (evenly distributed) 250 lb
© 2020 TRINITY - 800.985.5506 6

CARE AND MAINTENANCE
•Remember to drain remaining water and remove un-melted ice after use. Wipe dry for
storage.
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
•Do not use scouring pad for cleaning.
•Keep dry and avoid damp environments.
•Use a quality stainless steel cleaner and follow instructions that come with the cleaner.
Wipe ALONG the grain (NOT against).
•Cooler should not be left out unprotected in the elements. A protective Cooler Cover
(part number UBK-24-001-3519) is available as an accessory through www.trinityii.com.
7© 2020 TRINITY - 800.985.5506

PRODUCT REGISTRATION
Thank you for purchasing a TRINITY Stainless Steel Cooler. In order to register your product and
receive streamlined customer service, please fill out the following Product Registration Form and (1)
fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com
or (3) scan and email the form to [e-mail]. Include a copy of your original receipt
with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TXK-0805 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
© 2020 TRINITY - 800.985.5506 8

© 2020 TRINITY - 800.985.5506
9