Trinity TBFZ-0932 User manual

OWNER’S MANUAL
TRINITY BASICS 6-TIER 48” x 18” x72” NSF
WIRE SHELVING RACK w/WHEELS
Model # TBFZ-0932 / TBFPB-0932

Your TRINITY Basics 6-TIER NSF Wire Shelving Rack with Wheels should include the following parts.
Please inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online at
www.trinityii.com (Help & More, Contact Us).
You will need no additional tools for assembly.
PARTS LIST
TOP POLE (4)
End Cap (4) and
Pole Connector (4)
are pre-installed
A
BOTTOM POLE (4)
Threaded Insert (4)
is pre-installed
B
SHELF (6)
C
DEF
CASTER (w/wrench)
(2 locking, 2 non-locking)
For mobile option
SLIP SLEEVE
(48) + (2) extra
FEET LEVELER (4)
For stationary option
© 2018 TRINITY - 800.985.5506
1
Note: The black circular plastic tops in between the Shelves are used only for packaging purposes.
They are NOT NEEDED. Please discard.

B (4)
ASSEMBLY INSTRUCTIONS
B (4) D (8)
E (4) F (4)
Stationary Option
Screw each FEET LEVELER (F) into the bottom of each
BOTTOM POLE (B). Turn clockwise to screw in place.
Warning: For safety, at least half of the FEET LEVELER (F)
stem must be screwed into BOTTOM POLE (B).
Mobile Option
Screw each CASTER (E) into the bottom of each BOTTOM
POLE (B). Turn clockwise to screw in place. Make sure
the locking casters are on the same side.
Use the provided caster wrench to tighten completely.
Failure to do as instructed could result in the caster stem
breaking.
STEP 1
For easiest assembly, do not attach TOP (A) and BOTTOM
(B) POLES until instructed. Once connected, these will be
the posts for the rack.
Note that each POLE (A+B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D) has
raised horizontal lines inside designed to lock them in
place on POLE (A+B).
On BOTTOM POLE (B), place 1 pair of SLIP SLEEVES (D) at
the desired level no higher than the 3rd indentation from
the bottom. Please make sure the arrow faces up and
that the word “TOP” is right side up. Do this for each
BOTTOM POLE (B) and make sure that the heights are
identical for BOTTOM POLE (B).
Slide the pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (B). DO
NOT place more than one pair on each POLE (B) at a time.
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D)—this is normal.
STEP 2
© 2018 TRINITY - 800.985.5506 2

ASSEMBLY INSTRUCTIONS
D (8) C (1)
© 2018 TRINITY - 800.985.5506
3
Place SHELF (C) on its side and slide (4) BOTTOM POLES (B)
through the holes in SHELF (C). Make sure that SHELF (C) corner
cylinders are positioned over SLIP SLEEVES (D).
Stand the unit upright.
Note:
•The level side of SHELF (C) is the TOP side (the TRINITY logo
on the corner cylinders should be right-side up.)
•Use a rubber mallet, if needed, to secure SHELF (C).
•For convenience, place BOTTOM POLES (B) with Locking
Casters on the long side of the shelf if the rack will be pushed
against a wall OR if the rack is frequently rolled around like a
cart place BOTTOM POLES (B) with Locking Casters on the
side being pushed or pulled.
On BOTTOM POLE (B), place 1 pair of SLIP SLEEVES (D) at the
desired height between SHELVES (C). Please make sure the
arrow faces up and that the word “TOP” is right side up. Do
this for each BOTTOM POLE (B), and make sure that the
heights are identical for each BOTTOM POLE (B).
Lower SHELF (C) over BOTTOM POLES (B) so that the corner
cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).
Repeat Step 4 to install other SHELVES (C) as desired.
Note: Use a rubber mallet, if needed, to secure SHELVES (C).
STEP 3
STEP 4
C (1)

ASSEMBLY INSTRUCTIONS
D (32) C (4)
A (4)
© 2018 TRINITY - 800.985.5506
Screw TOP POLE (A) into BOTTOM POLE (B).
The tops of these poles are indicated by the
BLACK END CAP.
Repeat for remaining 3 TOP POLES (A).
On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at the desired
height between SHELVES (C). Please make sure the arrow
faces up and that the word “TOP” is right side up. Do this for
each POLE (A+B), and make sure that the heights are identical
for each POLE (A+B).
Lower SHELF (C) over TOP POLES (A) so that the corner
cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).
Repeat Step 6 to install other SHELVES (C) as desired.
Note: Use a rubber mallet, if needed, to secure SHELVES (C).
STEP 5
STEP 6
4

TRINITY Customer Service provides the following replacement parts:
SERVICE PARTS LIST –TBFZ-0932 (CHROME COLOR)
Part Number Description Part Number Description
1) XBK-01-011-2543 Slip Sleeve 6) XBK-98-003-2538 Feet Leveler
2) ZSV-04-006-3600 Top Pole 7) ZSV-99-007-4010 Non-locking Caster
3) ZSV-01-013-2523 Pole Connector 8) XXX-97-002-0001 Wrench
4) ZSV-04-008-3600 Bottom Pole 9) ZSV-03-030-4818 Shelf
5) ZSV-99-008-4010 Locking Caster 10) XBK-23-004-2517 Endcap
2
1
3
4
5
6
8
7
10
9
© 2018 TRINITY - 800.985.5506
5

TRINITY Customer Service provides the following replacement parts:
SERVICE PARTS LIST –TBFPB-0932 (BLACK COLOR)
Part Number Description Part Number Description
1) XBK-01-012-2543 Slip Sleeve 6) XBK-98-003-2538 Feet Leveler
2) PBK-04-006-3600 Top Pole 7) ZSV-99-007-4010 Non-locking Caster
3) ZSV-01-013-2523 Pole Connector 8) XXX-97-002-0001 Wrench
4) PBK-04-008-3600 Bottom Pole 9) PBK-03-030-4818 Shelf
5) ZSV-99-008-4010 Locking Caster 10) XBK-23-004-2517 Endcap
2
1
3
4
5
6
8
7
10
9
© 2018 TRINITY - 800.985.5506 6

WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed
could result in the caster stem breaking thereby causing the shelving rack to collapse.
3. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
4. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
5. Check for damaged parts.Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
6. Do NOT overload the product.
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals
•This item is not certified for outdoor use
Weight capacity per Shelf on Feet Levelers 450 lb (evenly distributed)
Weight capacity per Shelf on Casters 100 lb (evenly distributed)
Total weight capacity of Shelving Rack
(evenly distributed)
2700 lb (on Feet Levelers)
600 lb (on Casters)
7© 2018 TRINITY - 800.985.5506

Thank you for purchasing a TRINITY Basics 6-Tier NSF Wire Shelving Rack w/Wheels. In order to
register your product and receive streamlined customer service, please fill out the following Product
Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form
online at www.trinityii.com or (3) scan and email the form to [e-mail]. Include a
copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
© 2018 TRINITY - 800.985.5506 8

© 2018 TRINITY - 800.985.5506
9