Trinity Pro TBFZ-0927 User manual

OWNER’S MANUAL
TRINITY PRO 4-TIER NSF CORNER
WIRE SHELVING RACK
Model # TBFZ-0927 / TBFPBA-0927

Your TRINITY Pro 4-Tier NSF Corner Wire Shelving Rack should include the following parts. Please inspect
box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online
at www.trinityii.com (Help & More, Contact Us).
You will need no additional tools for assembly.
PARTS LIST
TOP POLE (5)
End Cap (5) and
Pole Connector (5)
are pre-installed
SLIP SLEEVE
(40) + (2) extra
Note: The black circular plastic tops in between the Shelves are used only for packaging purpose.
They are NOT NEEDED. Please discard.
BOTTOM POLE (5)
Threaded Insert (5) and
Feet Leveler (5)
are pre-installed
MIDDLE POLE (5)
Pole Connector (5)
is pre-installed
SHELF (4)
© 2018 TRINITY - 800.985.5506
1
ABC
DE

ASSEMBLY INSTRUCTIONS
Note: There will be a very small gap in-between two locked SLIP SLEEVES (E)—this is normal.
© 2018 TRINITY - 800.985.5506 2
A (5) E (10)
For easiest assembly, do not connect TOP POLES (C),
MIDDLE POLES (B), and BOTTOM POLES (A) until
instructed. Once connected, these will be the posts for
the Rack.
Note that each POLE (A+B+C) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (E) has
raised horizontal lines inside designed to lock them in
place on POLE (A+B+C).
On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (E) at
the desired level no higher than the 3rd indentation from
the bottom. Please make sure the arrow faces up and
that the word “TOP” is right side up. Do this for each
BOTTOM POLE (A), and make sure that the heights are
identical for each BOTTOM POLE (A).
Slide the pair of SLIP SLEEVES (E) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (A). DO
NOT place more than one pair on each BOTTOM POLE (A)
at a time.
STEP 1
STEP 2
Place SHELF (D) on its side and slide (5)
BOTTOM POLES (A) through the holes in
SHELF (D). Make sure that SHELF (D) corner
cylinders are positioned over SLIP SLEEVES (E).
Stand the unit upright.
Note:
•The level side of SHELF (D) is the TOP side
(the TRINITY logo on the corner cylinders
should be right-side up).
•Use a rubber mallet, if needed, to secure
SHELVES (D).
D (1)

ASSEMBLY INSTRUCTIONS
Screw MIDDLE POLE (B) into BOTTOM POLE (A).
Repeat for remaining 4 MIDDLE POLES (B).
© 2018 TRINITY - 800.985.5506
3
B (5)
STEP 3
STEP 4
On POLE (A+B), place 1 pair of SLIP SLEEVES (E) at the
desired height between SHELVES (D). Please make sure the
arrow faces up and that the word “TOP” is right side up.
Do this for each POLE (A+B), and make sure that the
heights are identical for each POLE (A+B).
Lower SHELF (D) over MIDDLE POLES (B) so that the corner
cylinders of SHELF (D) are positioned over SLIP SLEEVES (E).
Repeat Step 4 to install other SHELVES (D) as desired.
Note: Use a rubber mallet, if needed, to secure SHELVES (D).
E (10) D (1)

ASSEMBLY INSTRUCTIONS
Screw TOP POLE (C) into MIDDLE POLE (B).
The tops of TOP POLES are indicated by
the BLACK END CAP.
Repeat for remaining 4 TOP POLES (C).
© 2018 TRINITY - 800.985.5506 4
C (5)
STEP 5
STEP 6
On POLE (A+B+C), place 1 pair of SLIP SLEEVES (E) at the
desired height between shelves. Please make sure the
arrow faces up and that the word “TOP” is right side up. Do
this for each POLE (A+B+C), and make sure that the heights
are identical for each POLE (A+B+C).
Lower SHELF (D) over TOP POLES (C) so that the corner
cylinders of SHELF (D) are positioned over SLIP SLEEVES (E).
Repeat Step 6 to install other SHELVES (D) as desired.
Note: Use a rubber mallet, if needed, to secure SHELVES (D).
E (20) D (2)

5
ASSEMBLY INSTRUCTIONS
Feet Levelers are already screwed into BOTTOM POLES (A).
Adjust as needed to ensure your shelving rack is level.
STEP 7
© 2018 TRINITY - 800.985.5506

6
Part Number Description Part Number Description
1) XBK-01-011-2543 Slip Sleeve 5) XBK-98-010-2535 Feet Leveler
2) ZSV-04-006-2475 Top Pole 6) ZSV-04-043-2700 Bottom Pole
3) ZSV-01-013-2523 Pole Connector 7) XBK-23-004-2517 End Cap
4) ZSV-04-007-2000 Middle Pole 8) ZSV-03-041-2718 Shelf
SERVICE PARTS LIST –TBFZ-0927
TRINITY Customer Service provides the following replacement parts:
© 2018 TRINITY - 800.985.5506
1
2
3
4
8
7
6
5

SERVICE PARTS LIST –TBFPBA-0927
TRINITY Customer Service provides the following replacement parts:
7
Part Number Description Part Number Description
1) XBK-01-012-2543 Slip Sleeve 5) XBK-98-010-2535 Feet Leveler
2) PBA-04-006-2475 Top Pole 6) PBA-04-043-2700 Bottom Pole
3) ZSV-01-013-2523 Pole Connector 7) XBK-23-004-2517 End Cap
4) PBA-04-007-2000 Middle Pole 8) PBA-03-041-2718 Shelf
© 2018 TRINITY - 800.985.5506
1
2
3
4
8
7
6
5

WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of the
environment where the product will be placed and make sure to use the product in a safe
and responsible manner.
3. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
4. Check for damaged parts.Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
5. Do NOT overload the product.
CARE AND MAINTENANCE
Weight capacity per Shelf 800 lb (evenly distributed)
Total weight capacity of Shelving Rack 3200 lb (evenly distributed)
8
© 2018 TRINITY - 800.985.5506
•Avoid harsh, abrasive cleaners, and other corrosive chemicals
•This item is not certified for outdoor use

Thank you for purchasing a TRINITY Pro 4-Tier NSF Corner Wire Shelving Rack. In order to register your
product and receive streamlined customer service, please fill out the following Product Registration
Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at
www.trinityii.com or (3) scan and email the form to [email protected]om. Include a copy of
your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TBFZ-0927/TBFPBA-0927 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
9© 2018 TRINITY - 800.985.5506