tropitone Curve User manual

curve

Assemble furniture on a soft surface (i.e.: carpet, cardboard) to
prevent scratches.
Do not assemble with electrical tools, including battery powered ones.
Do not try to lift or flip furniture components with only one person.
Components may be heavy and awkward to handle, and may result in
injury to persons or damage to property if not lifted properly.
assembled furniture is heavy. assemble at place of use.
lounge chair
COMPONENTS
A B
Seat Backrest
x 1 x 1
REQUIRED TOOL(S) HARDWARE
Phillips #2 Screwdriver Screw 1/4" x 2"
x 4
üCheck that all hardware and components are in your carton before
you start assembly.
Congratulations on the purchase of your Tropitone® Curve Lounge Chair.
Read through all steps before fastening components together.
ASSEMBLY INSTRUCTIONS
CAUTION!
2 | tropitone.com

ASSEMBLY STEP 1
1/4" x 2"
x 2
ASSEMBLY STEP 2
1/4" x 2"
x 2
lounge chair
Insert the Backrest into the
Seat. DO NOT force the pieces
together. There will be a 1/2"
gap between the bottom of
the Backrest and Seat. This
is correct. Loosely install 2
screws to connect the Backrest
to the frame.
Turn the chair upside down
and install 2 screws to connect
the Backrest to the Seat. Fully
tighten these screws. Fully
tighten the 2 screws installed
in Step 1.
tropitone.com | 3

Tropitone Furniture Co., Inc.
5 Marconi
Irvine, California 92618
949 951 2010
www.tropitone.com
Warranty
For our current Warranty and
product care information, please visit
www.tropitone.com/warranty
Part # R9T00024
©2015 Tropitone Furniture Co., Inc.
12/15
For care and cleaning instructions, refer to the Tropitone® Care, Maintenance,
Safety & Warranty Information guide included with your furniture and
available at www.tropitone.com/warranty.
If you have difficulty understanding any of the instructions and need
assistance while assembling your Curve Components, please call Tropitone’s
Customer Service Center at 949.951.2010.
CARE INSTRUCTIONS
CUSTOMER SERVICE