True TSID-72-6 User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TSID-72-6
TSID-72-6
Model Doors
Capacity
(Cu. Ft.)
(liters) Shelves
Cabinet Dimensions
(inches)
(mm)
LD
†HHP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TSID-72-6 6 24
680
272
1/2
1842
291/4
743
501/4
1277
1/2
1/2
115/60/1
230-240/50/1
9.4
4.0
5-15P
▲
9
2.74
590
268
†Depth does not include 5/8
" (16 mm) for rear door handles. ▲Plug type varies by country.
3/07
R
True’s commitment to using the
highest quality materials and
oversized refrigeration systems
provides the user with colder
product temperatures, and lower
utility costs in an attractive
self-service display case.
Cabinet is NSF-7 certified to hold open
food product.
Oversized, factory balanced,
refrigeration system holds 38°F to
40°F (3.3°C to 4.4°C). Gravity coil
refrigeration system provides high
humidity environment for exceptional
preservation of meats and deli
products.
“Low-E”, double pane thermal glass
self-closing doors provide maximum
insulation value for greater efficiency
and energy savings.
Exterior - non-peel or chip white
laminated vinyl; durable and
permanent.
Interior - attractive, NSF approved,
white aluminum liner. 300 series
stainless steel floor with coved
corners.
Entire cabinet structure is foamed-
in-place using high density, CFC free,
polyurethane insulation.
Case is equipped with three (3) light
sources located in the front, rear and
under the top shelf for maximum
product display. Fluorescent lamps are
low UV emitting to enhance product
appearance and increase shelf life.
Automatic defrost system; time-
initiated, time-terminated.
Display Case:
Single-Duty Deli Case

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
231/2"
(597 mm)
TSID-72-6 TFQ031E TFQY46S TFQY31P TFQY313
TSID-72-6
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, and
lower utility costs in an attractive self
service, display case that brilliantly displays
deli meats and cheeses.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Gravity coil refrigeration system provides
high humidity environment for exceptional
preservation of meats and deli products.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains cabinet temperatures
of 38°F to 40°F (3.3°C to 4.4°C).
• Automatic defrost system; time-initiated,
time-terminated.
• Condensing unit located behind grill in
back of unit. Entire system slides out for
easy cleaning and maintenance.
CABINET CONSTRUCTION
• Exterior - non-peel or chip laminated vinyl;
white sides with black front and back
grills.
• Stainless steel counter top provides surface
for equipment such as registers and point-
of-purchase novelties.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel
floor with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC
free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with leg levelers.
DOORS
• Front and rear door assemblies feature
“Low-E”, double pane thermal glass. The
latest in energy efficient technology.
• Each door fitted with 12" (305 mm) long
handle.
• Self-closing doors. Sliding doors ride on
stainless steel V-Channel with stainless
steel bearings for smooth, even, positive
closure. Doors fit within plastic channel
frame.
• Front glass doors slanted 12.52° to
minimize reflection from overhead
lighting enhancing your cold product
presentations.
SHELVING
• Two (2) adjustable, heavy duty PVC coated
wire shelves. Top shelf dimension is
673/4"L x 171/2"D (1721 mm x 445 mm).
Bottom shelf dimension is 673/4"L x
19"D (1721 mm x 483 mm). Four (4)
chrome plated shelf clips included per
shelf.
• Aluminum shelf support pilasters. Shelves
are adjustable on 1/2" (13 mm) increments.
LIGHTING
• Case equipped with three (3) light sources
located in the front, rear and under the
top shelf for maximum product display.
Fluorescent lamps are low UV emitting to
enhance product appearance and increase
shelf life.
• Cabinet lighting utilizes electronic ballast
and T-8 bulbs for brighter illumination,
longer bulb life and increased energy
efficiency. Lamps are safety shielded.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒230 - 240V / 50 Hz.
❒6" (153 mm) standard legs.
❒6" (153 mm) seismic/flanged legs.
❒21/2" (64 mm) diameter castors.
❒4" (102 mm) diameter castors.
❒Ratchet locks (requires 4).
❒Additional non-lighted shelves (lighted
shelf available as replacement only).
❒Low-height models with 413/4" (1061 mm)
work surface height.
❒Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant), consult factory technical
service department for BTU information.
115/60/1
NEMA-5-15R
501/4"
(1277 mm)
ELEVATION RIGHT VIEW
Display Case:
Single-Duty Deli Case
721/2"
(1842 mm)
301/2"
(775 mm)
121/32"
(306 mm)
13/16"
(21 mm)
3/16"
(5 mm)
293/4"
(756 mm)
211/2"
(547 mm)
13/16"
(21 mm)
19/32"
(16 mm)
295/32"
(741 mm)
12.52°
171/2"
(445 mm)
19"
(483 mm)