True TDBD-48-2 User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
Model Doors
Capacity
(Cu. Ft.)
(liters)
Shelves
Stainless
PVC
Coated
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)LD
†H
TDBD-48-2 2 28
793
1 full
length
248
1/8
1223
351/8
893
55
1397
1/2115/60/1 14.2 5-20P 9
2.74
455
207
TDBD-48-2
TDBD-48-2
†Depth does not include 1/2" (13mm) for threaded drain fitting.
3/07
Double duty deli cases offer the
added advantage of two refrigerated
compartments. One for display to
provide a high profile area for ready to
serve deli products under the industry’s
best lighting, and a second lower
compartment for convenient bulk
storage.
Cabinet is NSF-7 certified to hold open
food product.
Oversized, factory balanced,
refrigeration system holds 38°F to
40°F (3.3°C to 4.4°C). Gravity coil
refrigeration systems provide high
humidity environment for exceptional
preservation of meats and deli
products.
“Low-E”, double pane thermal glass
front display and self-closing rear doors
provide maximum insulation value for
greater efficiency and energy savings.
Exterior - stainless steel front, sides and
back. White laminated rear panel and
rear louvered grill.
Interior - attractive, NSF approved,
white aluminum liner. 300 series
stainless steel floor with coved corners.
Case is equipped with three (3) light
sources for maximum product display;
two (2) cabinet mounted and one (1)
shelf mounted. Fluorescent lamps are
low UV emitting to enhance product
appearance and increase shelf life.
Automatic defrost system; time-
initiated, time-terminated.
Entire cabinet structure is foamed-
in-place using high density, CFC free,
polyurethane insulation.
Display Case:
Double Duty Deli Case
R
®

STANDARD FEATURES
Model:
PLAN VIEW
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D Back
KCL
TDBD-48-2
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, and lower utility costs in an
attractive display case that brilliantly displays
deli meats and cheese.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Gravity coil refrigeration systems provide
high humidity environment for exceptional
preservation of meats and deli products.
Cabinet comes standard with two coils, one in
the upper display area and one in the lower
storage area.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains cabinet temperatures of
38°F to 40°F (3.3°C to 4.4°C).
• Automatic defrost system; time-initiated, time-
terminated.
• Condensing unit located behind grill in back
of unit. Entire system slides out for easy
cleaning and maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel front, sides and back.
White laminated vinyl rear panel and rear
louvered grill.
• “Low-E”, double pane thermal front viewing
glass provides maximum insulation value for
greater efficiency and energy savings.
• Front viewing glass slanted 12.59° to minimize
reflection from overhead lighting, enhancing
your cold product presentations.
• Stainless steel counter top provides surface
for equipment such as registers and point-of-
purchase novelties.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel floor
with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with leg levelers.
GLASS DISPLAY AREA DOORS
• Glass door assemblies feature “Low-E”, double
pane thermal glass. The latest in energy
efficient technology.
• Each door fitted with 12" (305 mm) long
handle.
• Positive seal, self-closing doors. Sliding doors
ride on stainless steel V-Channel with stainless
steel bearings for smooth, even, positive
closure. Doors fit within plastic channel
frame.
SOLID STORAGE AREA DOORS
• Rear storage access doors are 300 series
stainless exterior inserts with mitered plastic
channel frames. Door liner is white aluminum
to match cabinet interior. Doors are fully
insulated.
• Each door fitted with 23/4" (70 mm) long
handle.
• Positive seal, self-closing doors.
SHELVING
• One (1) adjustable stainless steel mezzanine
shelf 439/16"L x 12"D (1107 mm x 305 mm).
Four (4) chrome plated shelf clips included.
• Two (2) non-adjustable heavy duty PVC coated
wire shelves 215/8"L x 283/8"D (550 mm x
721 mm) create bottom level of display area.
• Aluminum shelf support pilasters. Shelves are
adjustable on 1/2" (13 mm) increments.
LIGHTING
• Case is equipped with three (3) light sources
for maximum product display; two (2)
cabinet mounted and one (1) shelf mounted.
Fluorescent lamps are low UV emitting to
enhance product appearance and increase
shelf life.
• Cabinet lighting utilizes electronic ballast and
T-8 bulbs for brighter illumination, longer bulb
life and increased energy efficiency. Lamps
are safety shielded.
MODEL FEATURES
• Evaporators are epoxy coated to eliminate the
potential of corrosion.
• Rear mounted exterior 4 amp 115V receptacle.
• Refrigerated lower storage area accessed from
rear of cabinet.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1 phase
- 20 amp dedicated outlet. Cord and plug set
included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒6" (153 mm) standard legs.
❒6" (153 mm) seismic/flanged legs.
❒2
1/2" (64 mm) diameter castors.
❒4" (102 mm) diameter castors.
❒Ratchet lock.
❒113/4" (299 mm) deep non-lighted stainless
mezzanine shelves (maximum 2 levels per
unit).
❒Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant), consult factory technical service
department for BTU information.
BACK VIEW
115/60/1
NEMA-5-20R
Display Case:
Double Duty Deli Case
539/16"
(1361 mm)
481/16"
(1221 mm)
3/16"
(5 mm)
11/4"
(32 mm)
55"
(1397 mm)
221/2"
(572 mm)
195/16"
(491 mm) RIGHT VIEW
351/16"
(891 mm)
211/16"
(535 mm)
301/16"
(764 mm)
13/32"
(11 mm)
11/8"
(29 mm)
13/16"
(21 mm)
31
1
/
2
"
(801 mm)
TDBD-48-2 TFSY10E TFSY10S TFSY10P TFSY103 TFSY10B