Tuff stuff RMB-375 User manual

54 1/4"
31 1/2"
43 1/4"
AMERICA’SPREMIER EXERCISE EQUIPMENT
RMB-375
Multi-Purpose Bench
A S S E M B L Y I N S T R U C T I O N S
RMB-375 Rev0
Revision Date 6-05-2007
TuffStuff Fitness Equipment, Inc.
1325 E. Franklin Avenue
Pomona, CA 91766, USA
Ph: 909-629-1600 Fax: [phone]
E-mail: [e-mail] Net: www.tuffstuff.net

About the RMB-375 Multi-Purpose Bench
Congratulations on your new purchase of the Multi-Purpose
Bench. We hope you are completely satisfied with this product
and wish you many years of enjoyment.
TuffStuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will not
occur during shipment. The Home Lifetime Warranty and signature
indicating final inspection has been conducted by our line foreman,
is an expression of our confidence in the completeness, the
materials, and workmanship of this product.
Registration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on file with our factory,
be sure to complete the warranty registration card and send it to
TuffStuff Fitness Equipment today.
Prior to the Assembly of the Multi-Purpose Bench
We advise you to consult your local TuffStuff retailer if you should
have a question or problem regarding the proper assembly of this
unit.
Tool Requirements
One 7/8” combination wrench1.
One 3/4” combination wrench2.
One 9/16” combination wrench3.
One ratchet4.
One 3/4” socket5.
One 9/16” socket6.
Rubber Mallet7.
Windex or household glass cleaner8.
Utility knife9.
SCREW WIDTH
WASHERDIAMETER
NUTDIAMETER
SCREWLENGTH
Hardware Measurement Diagram
Note: Due to continuing product improvements, specifications and designs are subject to change
without notice.
Specifications
1. Maximum Wt. Capacity - 200 lbs.
2. Total Machine Weight - 95 lbs.
3. Footprint (LWH) - See Front Cover.
2RMB-375 Multi-Purpose Bench
Introduction
Step 1 Assembly List
Item # Description Qty.
1 MAIN FRAME 1
4 FRONT BASE FRAME 1
5 REAR BASE FRAME 1
11 PLASTIC ELLIPTICAL SHOE 4
21 HEX HEAD CAP SCREW 3/8-16 X 2 3/8 2
23 HEX HEAD CAP SCREW 3/8-16 X 1 1/4 2
24 FLAT WASHER SAE 3/8” 6
25 SPLIT LOCK WASHER 3/8” 2
26 NYLON INSERT JAM LOCK NUT 3/8-16 2

3RMB-375 Multi-Purpose Bench
Step 2 Assembly List
Item # Description Qty.
2 BACK PAD BRACKET 1
3 SEAT PAD BRACKET 1
9 METAL HINGE 2
13 NYLON SPACER 3/8 X 3/4 X 3/8 2
22 HEX HEAD CAP SCREW 1/2-13 X 8 1/2 1
23 HEX HEAD CAP SCREW 3/8-16 X 1 1/4 2
24 FLAT WASHER SAE 3/8” 4
26 NYLON INSERT JAM LOCK NUT 3/8-16 2
27 NYLON INSERT JAM LOCK NUT 1/2-13 1

4RMB-375 Multi-Purpose Bench
REV0
ITEM DESCRIPTION REV PART NO. QTY ITEM DESCRIPTION PART NO. QTY
1 MAIN FRAME 0 UP4973 1 18 TURN/PULL PIN W/KNOB AND LOCK BNH0989 1
2 BACK PAD BRACKET 0 UP4974 1 19 FLAT PHILLIPS MACHINE SCREW 8-32 X 1/4 BNH0408 1
3 SEAT PAD BRACKET 0 UP4975 1 20 SOCKET SET SCREW ALLOY 10-32 X 1/8 BNH0473 2
4 FRONT BASE FRAME 0 UP4976 1 21 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 2 3/8 BNH2043 4
5 REAR BASE FRAME 0 UP4977 1 22 HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 8 1/2 BNH2087 1
6PULL PIN 1/2 X 3 1/2 (YELLOW) BNH0603 2 23 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 1 1/4 BNH2038 10
7 BACK PAD 0 UP4978 1 24 FLAT WASHER SAE Z/P 3/8" BNH2030 20
8 SEAT PAD 0 UP4979 1 25 SPLIT LOCK WASHER Z/P 3/8" BNH2032 2
9METAL HINGE BNH0046 2 26 NYLON INSERT JAM LOCK NUT Z/P 3/8-16 BNH2026 6
10 BRONZE BUSHING 1/2 X 5/8 X 1/2 X 7/8 X 1/8 BNH0528 2 27 NYLON INSERT JAM LOCK NUT Z/P 1/2-13 BNH2027 1
11 PLASTIC HORIZONTAL ELLIPTICAL SHOE BNH1847 4 28 FLAT PHILLIPS SCREW ZINC # 2 X 1/2 BNH1480 2
12 URETHANE BUMPER 1 3/4 BNH0229 2 29 HEX KEY ALLOY 3/32" BNH0372 1
13 NYLON SPACER 3/8 X 3/4 X 3/8 BNH0392 2 30 TUFFSTUFF LOGO ALUMINUM SMALL BNH1323 1
14 NYLON STEM BUTTON (26 X 9.5 X 2.67 X 12.6) BNH0569 4 31 DECAL-CAUTION WEIGHT TRAINING SAFETY... BNH0126 1
15 PLASTIC TUBE GUIDE W/LIP 2" SQ BNH0058 1 32 DECAL-DANGER TIGHTEN THIS RETAINING... BNH0142 2
16 PLASTIC INSERT CAP ELLIPTICAL 2 X 4 BNH1794 1 33 DECAL-WARNING ATTENTION USERS! MOVING... BNH1895 1
17 BLACK WHEEL 3/8 X 3 X 1 1/4 W/BEARING BNH0300 2
RMB-375
Parts List
COLOR CHART
BOLD FONT = SUB-ASSEMBLY PARTS
BLACK= HARDWARE