TUYA MS-105BZ User manual

INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with localregulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override functionforthe end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2.Connect wires according to the wiring diagram.
3.Insert the module into the junction box.
4.Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type 2 Gang ZigBee Dimmer Module
Wireless Protocol ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power 2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home Voice control-work with Amazon Alexa Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip

INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with localregulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override functionforthe end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2.Connect wires according to the wiring diagram.
3.Insert the module into the junction box.
4.Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type 2 Gang ZigBee Dimmer Module
Wireless Protocol ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power 2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home Voice control-work with Amazon Alexa Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip

INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with localregulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override functionforthe end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2.Connect wires according to the wiring diagram.
3.Insert the module into the junction box.
4.Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type 2 Gang ZigBee Dimmer Module
Wireless Protocol ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power 2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home Voice control-work with Amazon Alexa Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip

INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with localregulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override functionforthe end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2.Connect wires according to the wiring diagram.
3.Insert the module into the junction box.
4.Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type 2 Gang ZigBee Dimmer Module
Wireless Protocol ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power 2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home Voice control-work with Amazon Alexa Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip

INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with localregulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override functionforthe end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2.Connect wires according to the wiring diagram.
3.Insert the module into the junction box.
4.Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type 2 Gang ZigBee Dimmer Module
Wireless Protocol ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power 2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home Voice control-work with Amazon Alexa Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip

INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with localregulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override functionforthe end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2.Connect wires according to the wiring diagram.
3.Insert the module into the junction box.
4.Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type 2 Gang ZigBee Dimmer Module
Wireless Protocol ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power 2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home Voice control-work with Amazon Alexa Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip

INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with localregulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override functionforthe end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2.Connect wires according to the wiring diagram.
3.Insert the module into the junction box.
4.Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type 2 Gang ZigBee Dimmer Module
Wireless Protocol ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power 2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home Voice control-work with Amazon Alexa Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip

INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with localregulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override functionforthe end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2.Connect wires according to the wiring diagram.
3.Insert the module into the junction box.
4.Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type 2 Gang ZigBee Dimmer Module
Wireless Protocol ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power 2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home Voice control-work with Amazon Alexa Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip

Log in or register your account with your mobile
number or e-mail address. Type in the verification
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the App.
Mobile number/e-mail address
Region
Open the App, select “+” on top right and choose
“switch（Zigbee)” to add device.
Confirm the Zigbee switch module is beeper rapidly.
(twice a second).
Add Device
the indicator blinks rapidly
Add Device
The connecting will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Zigbee switch will be
shown on the App, and you are able to change the
device name to your own taste.
Device added successfully
All Device
Connect to Amazon Alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device Name
Basic information about the device
Supported Third-party
Control Others
Others
Share Device
Create Group
Device information
Feedback
Device Location
Check Network
Amazon
Alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
App wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm indicator blinks rapidly
Obtain verification code
After the wiring of switch module is done, press
the reset switch for 10 times (keep time
interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing
mode.
9 10 11 12
14
13 15 16
Note:This smart switch module can only be used
with reset switch.
Reset Switch
Zigbee Switch
Zigbee Link/Reset:

Log in or register your account with your mobile
number or e-mail address. Type in the verification
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the App.
Mobile number/e-mail address
Region
Open the App, select “+” on top right and choose
“switch（Zigbee)” to add device.
Confirm the Zigbee switch module is beeper rapidly.
(twice a second).
Add Device
the indicator blinks rapidly
Add Device
The connecting will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Zigbee switch will be
shown on the App, and you are able to change the
device name to your own taste.
Device added successfully
All Device
Connect to Amazon Alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device Name
Basic information about the device
Supported Third-party
Control Others
Others
Share Device
Create Group
Device information
Feedback
Device Location
Check Network
Amazon
Alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
App wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm indicator blinks rapidly
Obtain verification code
After the wiring of switch module is done, press
the reset switch for 10 times (keep time
interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing
mode.
9 10 11 12
14
13 15 16
Note:This smart switch module can only be used
with reset switch.
Reset Switch
Zigbee Switch
Zigbee Link/Reset:

Log in or register your account with your mobile
number or e-mail address. Type in the verification
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the App.
Mobile number/e-mail address
Region
Open the App, select “+” on top right and choose
“switch（Zigbee)” to add device.
Confirm the Zigbee switch module is beeper rapidly.
(twice a second).
Add Device
the indicator blinks rapidly
Add Device
The connecting will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Zigbee switch will be
shown on the App, and you are able to change the
device name to your own taste.
Device added successfully
All Device
Connect to Amazon Alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device Name
Basic information about the device
Supported Third-party
Control Others
Others
Share Device
Create Group
Device information
Feedback
Device Location
Check Network
Amazon
Alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
App wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm indicator blinks rapidly
Obtain verification code
After the wiring of switch module is done, press
the reset switch for 10 times (keep time
interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing
mode.
9 10 11 12
14
13 15 16
Note:This smart switch module can only be used
with reset switch.
Reset Switch
Zigbee Switch
Zigbee Link/Reset:

Log in or register your account with your mobile
number or e-mail address. Type in the verification
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the App.
Mobile number/e-mail address
Region
Open the App, select “+” on top right and choose
“switch（Zigbee)” to add device.
Confirm the Zigbee switch module is beeper rapidly.
(twice a second).
Add Device
the indicator blinks rapidly
Add Device
The connecting will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Zigbee switch will be
shown on the App, and you are able to change the
device name to your own taste.
Device added successfully
All Device
Connect to Amazon Alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device Name
Basic information about the device
Supported Third-party
Control Others
Others
Share Device
Create Group
Device information
Feedback
Device Location
Check Network
Amazon
Alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
App wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm indicator blinks rapidly
Obtain verification code
After the wiring of switch module is done, press
the reset switch for 10 times (keep time
interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing
mode.
9 10 11 12
14
13 15 16
Note:This smart switch module can only be used
with reset switch.
Reset Switch
Zigbee Switch
Zigbee Link/Reset:

Log in or register your account with your mobile
number or e-mail address. Type in the verification
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the App.
Mobile number/e-mail address
Region
Open the App, select “+” on top right and choose
“switch（Zigbee)” to add device.
Confirm the Zigbee switch module is beeper rapidly.
(twice a second).
Add Device
the indicator blinks rapidly
Add Device
The connecting will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Zigbee switch will be
shown on the App, and you are able to change the
device name to your own taste.
Device added successfully
All Device
Connect to Amazon Alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device Name
Basic information about the device
Supported Third-party
Control Others
Others
Share Device
Create Group
Device information
Feedback
Device Location
Check Network
Amazon
Alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
App wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm indicator blinks rapidly
Obtain verification code
After the wiring of switch module is done, press
the reset switch for 10 times (keep time
interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing
mode.
9 10 11 12
14
13 15 16
Note:This smart switch module can only be used
with reset switch.
Reset Switch
Zigbee Switch
Zigbee Link/Reset:

Log in or register your account with your mobile
number or e-mail address. Type in the verification
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the App.
Mobile number/e-mail address
Region
Open the App, select “+” on top right and choose
“switch（Zigbee)” to add device.
Confirm the Zigbee switch module is beeper rapidly.
(twice a second).
Add Device
the indicator blinks rapidly
Add Device
The connecting will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Zigbee switch will be
shown on the App, and you are able to change the
device name to your own taste.
Device added successfully
All Device
Connect to Amazon Alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device Name
Basic information about the device
Supported Third-party
Control Others
Others
Share Device
Create Group
Device information
Feedback
Device Location
Check Network
Amazon
Alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
App wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm indicator blinks rapidly
Obtain verification code
After the wiring of switch module is done, press
the reset switch for 10 times (keep time
interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing
mode.
9 10 11 12
14
13 15 16
Note:This smart switch module can only be used
with reset switch.
Reset Switch
Zigbee Switch
Zigbee Link/Reset:

Log in or register your account with your mobile
number or e-mail address. Type in the verification
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the App.
Mobile number/e-mail address
Region
Open the App, select “+” on top right and choose
“switch（Zigbee)” to add device.
Confirm the Zigbee switch module is beeper rapidly.
(twice a second).
Add Device
the indicator blinks rapidly
Add Device
The connecting will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Zigbee switch will be
shown on the App, and you are able to change the
device name to your own taste.
Device added successfully
All Device
Connect to Amazon Alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device Name
Basic information about the device
Supported Third-party
Control Others
Others
Share Device
Create Group
Device information
Feedback
Device Location
Check Network
Amazon
Alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
App wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm indicator blinks rapidly
Obtain verification code
After the wiring of switch module is done, press
the reset switch for 10 times (keep time
interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing
mode.
9 10 11 12
14
13 15 16
Note:This smart switch module can only be used
with reset switch.
Reset Switch
Zigbee Switch
Zigbee Link/Reset:

Log in or register your account with your mobile
number or e-mail address. Type in the verification
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the App.
Mobile number/e-mail address
Region
Open the App, select “+” on top right and choose
“switch（Zigbee)” to add device.
Confirm the Zigbee switch module is beeper rapidly.
(twice a second).
Add Device
the indicator blinks rapidly
Add Device
The connecting will take about 10-120 seconds to
complete depending on your network condition.
Connecting
Device found
Register device to the smart cloud
initializing device
Make sure your router,mobile,and
device are as close as possible
2%
When pairing is done, the Zigbee switch will be
shown on the App, and you are able to change the
device name to your own taste.
Device added successfully
All Device
Connect to Amazon Alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device Name
Basic information about the device
Supported Third-party
Control Others
Others
Share Device
Create Group
Device information
Feedback
Device Location
Check Network
Amazon
Alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
App wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
App control
APP
Confirm indicator blinks rapidly
Obtain verification code
After the wiring of switch module is done, press
the reset switch for 10 times (keep time
interval not too short) until the beep sounds
continuously and rapidly as Di-Di-Di... for pairing
mode.
9 10 11 12
14
13 15 16
Note:This smart switch module can only be used
with reset switch.
Reset Switch
Zigbee Switch
Zigbee Link/Reset: