TW Steel 6S20 User manual

INSTRUCTION MANUAL

Thank you for purchasing this TW STEEL watch. The following
instructions are provided to help familiarize yourself with the
proper operation and care of your
TW STEEL watch. To
ensure correct use, please read and follow the instructions
carefully.
01

02
CONTENT
P3
P4
P5
P6
P8-9
Movement
6S20 ---------------------------------------------
6S50 ---------------------------------------------
OS20 ---------------------------------------------
VD77 ---------------------------------------------
VD79 --------------------------------------------- P7
PRECAUTIONS AND PREVENTIVE MEASURES -----------------

03
QUARTZ -- 6S20
Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown clockwise to set
hour and minute hands
(Check that AM / PM is set correctly)
SETTING THE TIME
Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown clockwise to
set the date
SETTING THE DATE
This chronograph is able to measure and
display time in 1/20 second united up to
maximum of 59min 59sec. The chronograph
1/20 second hand keeps continuously for 30
seconds after starting, and then stops
at "0" position.
HOW TO USE THE CHRONOGRAPH
Normal position1.
2.
3.
4. Press the button once to set the
chronograph 1/20 second hand to
the "0" position.
5. Push crown back to position
*It is not necessary to set the chronograph
hands after the battery is exchanged. If the
chronograph hand positions are incorrect,
follow above procedure, all the chronograph
hands will be reset to "0" position.
Pull crown out to position
Press the button once to set the
chronograph second hand to the
"0" position.
CHRONOGRAPH RESET
Press button to start the chronograph.
The chronograph hands will start moving.
1.
2.
3.
Press button again to stop the
chronograph. The chronograph hands stop
to indicate the elapsed time.
Press button to reset the chronograph.
All the chronograph hands will be reset
to "0" position.
*The chronograph can measure up to 60 minutes
and stops after a measurement of 60 minutes.
MIN
SEC
60
30
50 10
2040 1/20S
60
30
50 10
2040
2
0
8
6 4

04
QUARTZ -- 6S50
Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown clockwise to set
hour and minute hands
(Check that AM / PM is set correctly)
SETTING THE TIME
Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown clockwise to
set the date
SETTING THE DATE
This chronograph is able to measure and
display time in 1/20 second united up to
maximum of 59min 59sec. The chronograph
1/20 second hand keeps continuously for 30
seconds after starting, and then stops
at "0" position.
HOW TO USE THE CHRONOGRAPH
Normal position1.
2.
3.
4. Press the button once to set the
chronograph 1/20 second hand to
the "0" position
5. Push crown back to position
*It is not necessary to set the chronograph
hands after the battery is exchanged. If the
chronograph hand positions are incorrect,
follow above procedure, all the chronograph
hands will be reset to "0" position.
Pull crown out to position
Press the button once to set the
chronograph second hand to the
"0" position
CHRONOGRAPH RESET
Press button to start the chronograph.
The chronograph hands will start moving.
1.
2.
3.
Press button again to stop the
chronograph. The chronograph hands stop
to indicate the elapsed time.
Press button to reset the chronograph.
All the chronograph hands will be reset
to "0" position.
*The chronograph can measure up to 60 minutes
and stops after a measurement of 60 minutes.
MIN
SEC
60
30
50 10
2040 1/20S
60
30
50 10
2040
2
0
8
6 4

05
QUARTZ -- OS20 Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown counter-clockwise
to set the date
SETTING THE DATE
Normal position1.
2.
3.
4. Push crown back to position
* It is not necessary to set the chronograph
hands after the battery is exchanged. If the
chronograph hand positions are incorrect,
follow above procedure, all the chronograph
hands will be reset to "0" position.
Pull crown out to position
Press the button once to set the
chronograph second hand to the
"0" position. The chronograph hand
can be advanced rapidly by continuously
pressing button
CHRONOGRAPH RESET
Press button to start the chronograph.
The chronograph hands will start moving.
1.
2.
3.
Press button again to stop the
chronograph. The chronograph hands stop
to indicate the elapsed time.
Press button to reset the chronograph.
All the chronograph hands will be reset
to "0" position.
*The chronograph can measure up to 60 minutes
and stops after a measurement of 60 minutes.
MIN
SEC
60
30
50 10
2040 24H
60
30
50 10
2040
24
618
12
Normal position1.
2.
3.
4.
5.
positionPull crown out to
positionPush crown back to
Turn the crown clockwise to set
hour and minute hands
(Check that AM / PM is set correctly)
SETTING THE TIME
When the crown is pushed back to the
normal position, small second hand
begins to run
HOW TO USE THE CHRONOGRAPH
This chronograph is able to measure
and display time in 1/1 second united
up to maxinum of 59 minutes 59 seconds.
The chronograph second hand keeps
continuously for 59 minutes 59 seconds
after starting.

06
SEC
60
30
50 10
2040
60
30
50 10
2040
24H
24
618
12
QUARTZ -- VD77
Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown clockwise to set
when the small second hand
is at the 12 o’clock position
hour and minute hands
(Check that AM / PM is set correctly)
SETTING THE TIME
Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown to set 24 hours
SETTING 24 HOUR
Small Sec Hand

07
31
10
20
SUN
SAT
FRI
THU WED
TUE
MON
Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown clockwise to set
hour and minute hands
(Check that AM / PM is set correctly)
SETTING THE TIME
Normal position1.
2.
3.
4.
positionPull crown out to
positionPush crown back to
Turn the crown to set day/date
SETTING DAY/DATE
QUARTZ -- VD79

08
PRECAUTIONS AND PREVENTIVE MEASURES
Temperature
Do not expose your watch to sudden
temperature changes (exposure to
sunlight followed by immersion in cold
water) or extreme temperatures
[over 60°C (140°F) or below 0°C (32°F)].
Shocks
Avoid thermal or other shocks as it
may harm your watch. In the event of
a violent shock please have your
watch checked by a reputable jeweler
or service center.
Harmful Products
Avoid direct contact with solvents,
detergents, and perfumes, cosmetic
products, etc. since they may damage
the bracelet, the case and/or the
gaskets.
Care and Checks
Clean the case and bracelet regularly
using a soft cloth to prevent any
corrosion caused by perspiration. All
water resistant watches can be cleaned
with a toothbrush and soapy water, and
then dried with a soft cloth. After being
worn in the sea, the watch must be
rinsed with warm fresh water, and then
dried completely.
Replacing the Battery
(For Quartz watches only)
We recommend you take the watch to
a reputable jeweler or watch repair
facility who is equipped with the tools
and apparatus required to carry out
the work and the necessary checks in
a professional manner. A worn-out
battery should be replaced immediately
in order to reduce the risk of leakage
and consequent damage to the
movement.

09
Water Resistance
1. [3atm / 30m / 100ft]
Watches water resistant to
30 meters /100 feet.
2. [5atm / 50m / 165ft]
Watches water resistant to
50 meters /165 feet.
3. [10atm / 100m / 330ft]
Watches water resistant from
100 meters / 330 feet or more
with screw down crown and
diving bezel.
According to the water resistance 1, 2 or 3
listed above, watches are protected against:
1-2-3
2-3 Free diving / Water sports
Water splashes / Rain / Shower
Limited Warranty
Your TW STEEL watch is warrantied
by TW STEEL for a period of TWENTY-
FOUR (24) Months from the date of
purchase under the terms and conditions
of this warranty. The international
TW STEEL warranty covers material
and manufacturing defects. The warranty
only becomes active if the warranty
certificate is dated, fully and correctly
completed. In the event that repairs
are improper to restore the
normal
conditions of use of your
TW STEEL
watch, TW STEEL guarantees its
replacement by an TW STEEL watch of
identical or similar characteristics. The
warranty for the replacement watch is
TWENTY-FOUR (24) Months after the
date the replacement is issued.
This manufacturer’s warranty does not
cover:
1. The life of the battery
2. Wear and tear and aging (e.g. scratched
crystal; alteration of the color and/or
material of non metallic straps and
chains, such as leather, textile, rubber;
peeling of the plating).
3. Any damage on any part of the watch
resulting from abnormal/abusive use,
lack of care, negligence, and accidents
(nicks, dents, crushing, broken crystal,
etc.). Incorrect use of the watch and
non-observance of the use directions
provided by
TW STEEL . The TW STEEL
watch not handled by a reputable
jeweler or service center (e.g., for
battery replacement, services or repairs)
or which has been altered in its original
condition beyond
TW STEEL ’s control.