TW Steel VD31 User manual

VD31
SEIKO MOVEMENT

TW STEEL
MAINTENANCE
TW Steel uses the best materials and carries out
strict controls before the watch leaves the factory.
The way in which you wear or treat your TW Steel
will determine whether the appearance of the
watch is maintained in the future, or whether it will
deteriorate. In order to enjoy wearing your TW Steel
as long as possible, we include a number of tips: If
the watch comes into contact with hard or corrosive
materials, this can cause damage, which, if it occurs
regularly, will become clearly visible in the form of
scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used. It
is advisable to regularly polish your watch with a soft
cotton cloth. The watch is a precision mechanical
instrument and should be treated as such. Adjusting
the time or date, opening or closing the crown or
crowncap, should not be done roughly, but carefully.
TW Steel isawatch brand harmoniously combining both design and
innovation. ‘The Watch in Steel’ leads the oversized market with style and
quality guaranteed. TW Steel values the most important relationship of all
– the onewith the consumer. To express this, wehereby give you all the
information that you need to enjoy yourTW Steel watch to the fullest.
VD31 SEIKO MOVEMENT

1, 2 3 4
DISPLAY AND CROWN / BUTTON
OPERATION
TIME SETTING
1. Pull the crown out to the 2nd Click Position when the second hand
is at the 12 o’clock position.
2. Turn the crown to set the hour and minute hands.
*Check that 24 hour hand is set correctly
3. Push the crown back to the normal position.
*The 24 hour hand moves correspondingly with the hour hand.
*The moment of the date changes is midnight. When setting the hour
hand, make sure that AM/PM is correctly set by using the 24 hour
hand as an AM/PM indicator.
Using the time difference correction
When moving to a country or area which is in a different timezone, the
current time in the local time can be corrected.
1. Crown at the normal position.
2. To adjust the time by pressing the buttons A or B.
*By pressing button A the hand move counter clockwise. - 1 hour / push
*By pressing button B the hand move clockwise. + 1 hour / push
ADJUSTING THE DUAL TIME OF 24
HOUR HAND POSITION
Before setting the time, check if the dual time of 24 hour hand is in
the “0” (24 o’oclock) position. If the dual time of 24 hour hand is not
in the “0” position, reset them following the procedure below.
The battery setting and after battery change, please execute the “0”
position adjustment.
1. Pull the crown out to the 2nd Click Position.
2. Keep the buttons A & B pressed at the same time more than 2
seconds, and then release the buttons.
*Dual time of 24 hour hand moves. Returned to where it was. However,
confirmation is difficult because the amount of movement is small.
3. Press button A or B to reset the dual time of 24 hour hand to “0”
position.
*By pressing button A the hand move counter clockwise.
*By pressing button B the hand move clockwise.
*Press and hold the button, possible to fast-forward modification.
4. Push the crown back to the normal position.

CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
TIME SETTING (DUAL TIME OF 24 HOUR HAND)
1. Pull the crown out to the 2nd Click Position when the second hand
is at the 12 o’clock position.
2. To adjust the time by pressing the buttons A or B.
*By pressing button A the hand move counter clockwise.
*By pressing button B the hand move clockwise.
*Press and hold the button, possible to fast-forward modification.
3. Push the crown back to the normal position.
DATE SETTING
*Before setting the date, be sure to set the time.
1. Pull out the crown to the 1st Click Position.
2. Turn the crown to clockwise until the next date appears.
3. Push the crown back to the normal position.
*Do not set the date during any time between 9:00 PM and 1:00 AM.
Otherwise, the date may not change properly. If it is necessary to set
the date during that time period, first change the time to any time
outside it, set the date and then reset the correct time.