TW Steel 6S21 User manual

6S21
MIYOTA MOVEMENT

TW STEEL
MAINTENANCE
TW Steel uses the best materials and carries out
strict controls before the watch leaves the factory.
The way in which you wear or treat your TW Steel
will determine whether the appearance of the
watch is maintained in the future, or whether it will
deteriorate. In order to enjoy wearing your TW Steel
as long as possible, we include a number of tips: If
the watch comes into contact with hard or corrosive
materials, this can cause damage, which, if it occurs
regularly, will become clearly visible in the form of
scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used. It
is advisable to regularly polish your watch with a soft
cotton cloth. The watch is a precision mechanical
instrument and should be treated as such. Adjusting
the time or date, opening or closing the crown or
crowncap, should not be done roughly, but carefully.
TW Steel isawatch brand harmoniously combining both design and
innovation. ‘The Watch in Steel’ leads the oversized market with style and
quality guaranteed. TW Steel values the most important relationship of all
– the onewith the consumer. To express this, wehereby give you all the
information that you need to enjoy yourTW Steel watch to the fullest.
6S21 MIYOTA MOVEMENT

SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the
Normal position.
SETTING THE DATE
1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
*If the date is set between the hours of around 9:00 PM
and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the
Normal position.
USING THE CHRONOGRAPH
The chronograph is able to measure and display the time
in 1/4 second united up to a maximum of 59 minutes and
59 seconds.
Measuring time with the stopwatch
1. Press button “A” to start the chronograph.
2. The chronograph can be started and stopped each time
button “A” is pressed.
3. Press button “B” to reset the chronograph and chronograph
minute and second hands return to their Zero positions.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
CHRONOGRAPH RESET (INCL. AFTER
REPLACING BATTERY)
This procedure should be performed when the chronograph
second hand does not return to the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button “A” once to set the chronograph second
hand to the Zero position.
3. Press the button “B” once to set the chronograph 1/20
second hand to the Zero position.
*The chronograph hands can be advanced rapidly by continuously
pressing button “A” or “B”.
4. Once the hands are set at Zero position, reset the time
and return the crown to its Normal position.
Chronograph
second hand
Hour hand
Chronograph
minute hand
Second hand
Minute hand
Button "A"
Button "B"
Calendar
Normal position
1st Click Position
2nd Click Position
6S21