TW Steel VOLANTE CHRONPGRAPH 45MM User manual

VOLANTE CHRONPGRAPH 45MM

TW STEEL
TW Steel is a watch brand harmoniously combining
both design and innovation. ‘The Watch in Steel’ leads
the oversized market with style and quality guaranteed.
TW Steel values the most important relationship of all –
the one with the consumer. To express this, we hereby
give you all the information that you need to enjoy your
TW Steel watch to the fullest.
MAINTENANCE
TW Steel uses the best materials and carries out strict
controls before the watch leaves the factory.
The way in which you wear or treat your TW Steel will
determine whether the appearance of the watch is
maintained in the future, or whether it will deteriorate.
In order to enjoy wearing your TW Steel as long as
possible, we include a number of tips: If the watch
comes into contact with hard or corrosive materials,
this can cause damage, which, if it occurs regularly, will
become clearly visible in the form of scratches.
Your watch should be cleaned with a soft cotton cloth
that is not
impregnated with any cleaning material. Absolutely no
cleaning materials should be used. It is advisable to
regularly polish your watch with a soft cotton cloth. The
watch is a precision mechanical instrument and should
be treated as such. Adjusting the time or date, opening
or closing the crown or crowncap, should not be done
roughly, but carefully.
ENGLISH

USING THE CHRONOGRAPH
The chronograph is able to measure and display the time in 1/1
second united up to a maximum of 1 hour. The chronograph can
be started and stopped each time button A is pressed. Pressing
button B resets the chronograph. All hands return to their (0)
position. If the chronograph second hand does not return to the
(0) second position after the chronograph has been reset or after
replacing the battery, you should do the following: Pull the crown
out to the 2nd position.
Press button A to set the chronograph second hand to the (0) position.
The chronograph second hand can be advanced rapidly by continously
pressing button A. Once the hands have returned to the (0) position,
return the crown to its normal position and screw the crown clockwise
back to the case.
(0) position
Chronograph
minute hand
Hour hand
Chronograph
hour hand
Chronograph
second hand
Second hand Date
Button B
Crown /normal
crown position
Minute hand
Button A
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
USE OF THE CROWN
To adjust the time or set the date, unscrew
the crown by turning it anti-clockwise.
After adjusting, screw the crown back
by turning it clockwise.
ADJUSTING THE TIME
Pull the crown out to the 2nd position.
Turn the crown to set the hour and minute hands.
After the time has been set, push the crown back
to its normal position.
ADJUSTING THE DATE
Pull the crown out to the 1st position.
Turn the crown anti-clockwise to set the date.
After the date has been set, push the crown
back to its normal position.