TW Steel Pilot TW401 User manual

manual / guaranteecard
MEASURING TIME WITH THE CHRONOGRAPH
Adjusting the date
Adjusting the date
Pull out the crown to the 1st
position. Turn the crown to the
left to set the date.
After the date has been set, push
the crown back to the normal
position.
CAUTION: IF THE CROWN IS NOT PRESSED
IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN
BE SERIOUSLY DAMAGED!
Using the chronograph
The chronograph is able to
measure and display the time in
1/1 second united up to an maxi-
mum of 1 hour. The chronograph
can be started and stopped
each time button A is pressed.
Pressing button B resets the
chronograph. All hands return to
their (0) position.
If the chronograph second hand
does not return to the (0) position
after the chronograph has been
reset or after replacing the bat-
tery, you should do the
following: Pull out the crown to
the 2nd position. Press button A
to set the chronograph second
hand to the (0) position.
The chronograph hands can be
advanced rapidly by continuously
pressing button A or B. Once the
chronograph second hand has
returned to the (0) position, push
the crown back to the normal
position.
ADJUSTING THE DATEADJUSTING THE DATE
Guaranteecard_Pilot.indd 1 04-02-13 14:07
manual

Use of the crown
To adjust the time or set the date
you pull out the crown to its 1st or
2nd position.
Follow the next instructions to adjust
the time and date.
(0) POSITION
BUTTON A
MINUTE HAND
CHRONOGRAPH
24-HOUR HAND
CROWN / NORMAL
CROWN POSITION
BUTTON B
HOUR HAND
CHRONOGRAPH
MINUTE HAND
CHRONOGRAPH
SECOND HAND
SECOND HAND
DATE
With the purchase of your TW Steel watch you are entitled to
a guarantee against factory defects for a period of two years.
Damage resulting from incorrect use or poor treatment as well
as wear and tear resulting from use are excluded.
INSTRUCTIONS FOR THE PILOT WATCH USE OF THE CROWN ADJUSTING THE TIMEADJUSTING THE TIME
Adjusting the time
Pull out the crown to the 2nd click
position so that the second hand
stops at (0) position. Turn the crown
to set the hour and minute hands.
After adjusting the time push the
crown back to the normal position.
Adjusting the time
MODEL NO:
DEALER:
MODEL NO:
DATE OF PURCHASE:
Guaranteecard_Pilot.indd 2 04-02-13 14:07

Use of the crown
To adjust the time or set the date
you pull out the crown to its 1st or
2nd position.
Follow the next instructions to adjust
the time and date.
(0) POSITION
BUTTON A
MINUTE HAND
CHRONOGRAPH
24-HOUR HAND
CROWN / NORMAL
CROWN POSITION
BUTTON B
HOUR HAND
CHRONOGRAPH
MINUTE HAND
CHRONOGRAPH
SECOND HAND
SECOND HAND
DATE
With the purchase of your TW Steel watch you are entitled to
a guarantee against factory defects for a period of two years.
Damage resulting from incorrect use or poor treatment as well
as wear and tear resulting from use are excluded.
INSTRUCTIONS FOR THE PILOT WATCH USE OF THE CROWN ADJUSTING THE TIMEADJUSTING THE TIME
Adjusting the time
Pull out the crown to the 2nd click
position so that the second hand
stops at (0) position. Turn the crown
to set the hour and minute hands.
After adjusting the time push the
crown back to the normal position.
Adjusting the time
MODEL NO:
DEALER:
MODEL NO:
DATE OF PURCHASE:
Guaranteecard_Pilot.indd 2 04-02-13 14:07

manual / guaranteecard
MEASURING TIME WITH THE CHRONOGRAPH
Adjusting the date
Adjusting the date
Pull out the crown to the 1st
position. Turn the crown to the
left to set the date.
After the date has been set, push
the crown back to the normal
position.
CAUTION: IF THE CROWN IS NOT PRESSED
IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN
BE SERIOUSLY DAMAGED!
Using the chronograph
The chronograph is able to
measure and display the time in
1/1 second united up to an maxi-
mum of 1 hour. The chronograph
can be started and stopped
each time button A is pressed.
Pressing button B resets the
chronograph. All hands return to
their (0) position.
If the chronograph second hand
does not return to the (0) position
after the chronograph has been
reset or after replacing the bat-
tery, you should do the
following: Pull out the crown to
the 2nd position. Press button A
to set the chronograph second
hand to the (0) position.
The chronograph hands can be
advanced rapidly by continuously
pressing button A or B. Once the
chronograph second hand has
returned to the (0) position, push
the crown back to the normal
position.
ADJUSTING THE DATEADJUSTING THE DATE
Guaranteecard_Pilot.indd 1 04-02-13 14:07

manual / guaranteecard
MEASURING TIME WITH THE CHRONOGRAPH
Adjusting the date
Adjusting the date
Pull out the crown to the 1st
position. Turn the crown to the
left to set the date.
After the date has been set, push
the crown back to the normal
position.
CAUTION: IF THE CROWN IS NOT PRESSED
IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN
BE SERIOUSLY DAMAGED!
Using the chronograph
The chronograph is able to
measure and display the time in
1/1 second united up to an maxi-
mum of 1 hour. The chronograph
can be started and stopped
each time button A is pressed.
Pressing button B resets the
chronograph. All hands return to
their (0) position.
If the chronograph second hand
does not return to the (0) position
after the chronograph has been
reset or after replacing the bat-
tery, you should do the
following: Pull out the crown to
the 2nd position. Press button A
to set the chronograph second
hand to the (0) position.
The chronograph hands can be
advanced rapidly by continuously
pressing button A or B. Once the
chronograph second hand has
returned to the (0) position, push
the crown back to the normal
position.
ADJUSTING THE DATEADJUSTING THE DATE
Guaranteecard_Pilot.indd 1 04-02-13 14:07