TW Steel SAHARA FORCE INDIA PILOT User manual

SAHARA FORCE INDIA PILOT

TW STEEL
TW Steel is a watch brand harmoniously combining
both design and innovation. ‘The Watch in Steel’ leads
the oversized market with style and quality guaranteed.
TW Steel values the most important relationship of all –
the one with the consumer. To express this, we hereby
give you all the information that you need to enjoy your
TW Steel watch to the fullest.
MAINTENANCE
TW Steel uses the best materials and carries out strict
controls before the watch leaves the factory. The way
in which you wear or treat your TW Steel will determine
whether the appearance of the watch is maintained in
the future, or whether it will deteriorate. In order to enjoy
wearing your TW Steel as long as possible, we include
a number of tips: If the watch comes into contact with
hard or corrosive materials, this can cause damage,
which, if it occurs regularly, will become clearly visible in
the form of scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used. It
is advisable to regularly polish your watch with a soft
cotton cloth. The watch is a precision mechanical
instrument and should be treated as such. Adjusting the
time or date, opening or closing the crown or crowncap,
should not be done roughly, but carefully.
ENGLISH

Hour hand
Chronograph
second hand
Date
(0) position
Minute hand
Crown / normal
crown position
Chronograph
minute hand
Second hand
Button A
Chronograph
1/20 second
hand
Button B
USE OF THE CROWN
To adjust the time or set the date, pull the crown
out to the 1st or 2nd position. After adjusting,
push the crown back to its normal position.
ADJUSTING THE TIME
Pull the crown out to the 2nd click position so that
the second hand stops at (0) position. Turn the
crown to set the hour and minute hands.
ADJUSTING THE DATE
Pull the crown out to the 1st position.
Turn the crown clockwise to set the date.
After the date has been set, push the crown
back to the normal position.
USING THE CHRONOGRAPH
The chronograph is able to measure and display the time
accurately to 1/20th of a second, up to a maximum of
59 minutes and 59 seconds. The retrograde chronograph
1/20 second hand keeps running continuously for
30 seconds after starting and then stops at the (0) position.
The chronograph can be started and stopped each
time button A is pressed. Pressing button B resets the
chronograph. All hands return to their (0) position.
If the chronograph second hand and the chronograph
1/20 second hand do not return to the (0) position after the
chronograph has been reset or after the battery has been
replaced, you should do the following. Pull the crown out
to the 2nd position. Press button A to set the chronograph second
hand to the (0) position. Press button B to set the chronograph
1/20 second hand to the (0) position. The chronograph second
hands can be advanced rapidly by continuously pressing button A
or B. Once the hands have returned to the (0) position, return the
crown to its normal position.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!