Tysso TP-1615 User manual

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
1
TP-1615
Fanless Full-Flat POS Terminal
User Manual
TP Series
Ver. 1.0, April, 2022

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
2
Contents
General Information 3
Revision History 3
About This Manual 4
Disclaimer 4
Warning 4
Caution 5
Warranty Limits 5
Trade Marks and Service Marks 5
Important Safety Information 6
Product Overview 7
Packing 7
Specifications 8
Dimension 10
Part Description 11
I/O Ports 14
POS Installation 16
Unpack Your POS 16
Install Your POS 17
Appendix 18
Install the Modular Customer Display (Optional) 18
Install the 2nd Display (Optional) 19
Install the MSR & i-Button Module (Optional) 20

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
3
General Information
Revision History
Date
Version
Update Summary
Remark
Approved By
2022/04/28
V1.0
Initial Release
Wira Wang
Robert Kuo

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
4
About This Manual
The purpose of this user’s manual is to provide general information on TYSSO’s POS
Terminal and to show the users how to configure the hardware-related configurations. The
information in this manual is subject to change without notice due to rapid improvement on IT
technology. Users can get the most up to date information from our web sites:
Uhttp://www.fametech.com.twU
Disclaimer
This manual has been examined for accuracy. While precaution has been taken in the
preparation of this manual, neither the manufacturer takes no liability for errors or omissions
nor assume any responsibility for damage(s) incurred directly or indirectly from errors,
omissions, or discrepancies of this manual.
IN NO EVENT WILL THE VENDOR BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF THE POSSIBILITY
OF SUCH DAMAGES HAS BEEN ADVISED. IN PARTICULAR, THE VENDOR SHALL NOT
HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH
THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, OR
RECOVERING SUCH HARDWARE, SOFTWARE OR DATA
Warning
The terminal has been tested and found to comply with the limits for a Class a digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interface in a residential installation. This equipment can generate
and radiate radio frequency energy and, if not installed and used according to the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interface will not occur under particular installation. If this equipment does cause harmful
interference to radio or television reception, which is found by turning the equipment off and
on, the user is encouraged to try to correct the interface by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment or device.
Connect the equipment to an outlet other than the receiver’s.
Consult a dealer or an experienced radio/TV technician for assistance.

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
5
Caution
The system is provided with a battery-powered Real-Time Clock circuit. There is a danger of
exposing and personal injury if the battery is incorrectly replaced or mistreated. Do not
attempt to disassemble the battery, immerse it in the water or expose it to fire.
Warranty Limits
If the product and the parts are disassembled by any person other than the authorized
technicians, the warranty will be terminated. The users should consult his/her dealer for any
technical problems. Warranty does not cover any damage caused by improper use.
Trade Marks and Service Marks
TYSSO is a registered trademark of FAMETECH INC.
Other brand and product names are trademarks and registered trademarks and service marks
of their respective owners.

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
6
Important Safety Information
Read following instructions carefully.
Use only parts, especially power adapter, recommended by the manufacturer;
unapproved parts may be hazardous.
Before plugging the power cord into the AC inlet of the power supply unit, make
sure that the voltage applied to the power outlet is within the specified range
(100V~240V).
Improper power source voltage range will cause damage to the power supply unit.
Power off the system and remove the power adapter while cleaning the system.
Before powering on the system, make sure all the peripherals are firmly installed.
Do not use the system near water, such as a bathtub, a washbowl, a kitchen sink,
a laundry tub, and a swimming pool. Do not expose the machine under direct
sunlight, and keep it away from any heat source.
Do not place the system on an unstable cart, stand or table. If the machine falls, it
may injure a person or cause serious damage to the appliance.
Do not allow anything to rest on the power cord. Do not locate the system where
people may walk on the cord.
The system is equipped with a three-wire grounded plug with a third (grounding)
pin. This is a safety feature. If your outlet does not accommodate the three-wire
plug, have an electrician install a correct outlet, or use an adapter to ground the
appliance safely. Do not leave out the safety purpose of the grounded plug.
Do not allow anything to rest on the power cord. Do not locate the system where
people may walk on the cord.
Do not make the power outlet and extension cords overload. Overload can result
in fire or electric shock.
Do not push any object into the computer cabinet. Dangerous voltage points may
be touched and the parts may be shorted out resulting in fire or electric shock.
Do not attempt to service the system on your own. Opening or removing cover can
expose you to dangerous voltage or other hazards.
Power off the system before installing or removing non-PNP (plug and play)
devices.
If any of the following situations occurs, unplug the systems from the power outlet
immediately and consult with a qualified service person:
1. The power cord or plug is damaged or frayed.
2. Liquid is spilled into the system.
3. The system is dropped or the cabinet is damaged.
When the system is not in use, cover the system and store it with care.

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
7
Product Overview
Packing
POS Unit
Power Adapter AC Power Cord
Contents
POS Unit x 1
Power Adapter (pre-installed to the base) x 1
AC Power Cord x 1
RJ45 to RS-232-DB9 Male Cable x 3
Optional Accessories*
Magnetic Stripe Card Reader (MSR)
Modular Customer Display
i-Button Module
2nd LCD Display
*For more information relating to the other optional peripherals, please contact the local
representatives or technical support personnel of the providers.

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
8
Specifications
Model Name
TP-1615
Processor
Intel® Elkhart Lake Celeron® J6412 (1.5M Cache, up to 2.60 GHz)
System Memory
2 x 260 pin DDR4 SO-DIMM, up to 32GB
Storage
1 x M.2 SATA and PCIe SSD
LCD Panel
15-inch TFT LCD with LED Backlight
1024 (W) RGB x 768 (H)
Touch Panel
True-Flat Projected Capacitive Multi Touch
Speaker
1 x 2W High Quality Speaker
I/O Expansion
USB
1 x USB-A 3.2, and 1 x USB-C 3.2 (Bottom)
2 x USB-A 2.0 (Bottom)
2 x USB-A 2.0 (Panel Side)
LAN
1 x RJ45 10/100/1000Mbps Giga Ethernet
COM
3 x COM (RJ45), w/ RI/5V/12V (Bottom)
1 x COM (USB) (Panel Side)
HDMI
1 x HDMI Port
Audio
1 x Line-out and 1 x MIC-in
Cash Drawer
1 x RJ11 port supports 2 cash drawer with 12V or 24V by jumper
DC Power Out
1 x +12V Power Out
DC Power In
1 x Standard DIN 4PIN type
Power Management
Power Adapter
12V@5A, 60W Adapter
Mechanical & Environmental
Dust and Water
IP65 on Front Bezel
Tilt Adjustment
15°~ 85°(w/ Standard Base)
0°~ 90°(w/ Folding Base)
Dimension
355 (W) x 303 (H) x 205 (D)mm (w/ Standard Base)
355 (W) x 312 (H) x 200 (D)mm (w/ Folding Base)
Weight
4.6 kg (w/ Standard Base)
6.6 kg (w/ Folding Base)
Certification
CE/ FCC/ LVD
Operation System
Windows 10 IoT and Linux
TPM
TPM 2.0 (Optional)
Operation Condition
0°C ~ +40°C / 20 ~ 80% without condensation
Storage Condition
-20°C ~ +55°C / 20 ~ 85% without condensation

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
9
Optional Accessories
Optional Accessories
2nd Display
8" (800x 600), 9.7" (1024X768) , 10.1" (1280x800) and 15" (1024x768) LCD Display
Optional PCAP Touchscreen
Customer Display
VFD and LCD Customer Display
MSR
Bi-directional, Comply with ISO 7811 and Three Track support
Combo Card Reader
MSR - Comply with ISO 7811/JIS II and Three Track
RFID - Comply Mifare, ISO14443AB-4 and Felica
i-Button
Dallas i-button Reader
Wi-Fi
Wi-Fi IEEE 802.11 a/b/g/n/ac
LTE
4G LTE Mini-PCIe with External Antenna Rod
VESA Bracket
VESA-Compatible, 75 x 75 (mm)
*For further information relating to the other optional peripherals, please contact the local
representatives or technical support personnel of the providers.

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
10
Dimension
Left View Front View Right View
Rear View
Bottom View
Note:
The Magnetic Stripe Card Reader (MSR) and i-Button Module are optional peripherals and
may not be included in the package. Please consult the local representatives for further
information.

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
11
Part Description
Front View
Rear View
MSR Module
(Optional)
LCD Touch Screen
i-Button Module
(Optional)
Power Indicator
Base
Customer Display (Optional)
i-Button Module
(Optional)
Power Switch
Base
Cable Outlet
MSR Module
(Optional)

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
12
Side View
Left View (with Optional i-Button) Left View
Right View (with Optional MSR) Right View
Note: The right I/O ports (USB, RS-232) are reserved for MSR Module.
Customer Display
(Optional)
i-Button Module
(Optional)
Power Switch
Power Switch
Side I/O Port
(USB)
MSR Module
(Optional)
Customer Display
(Optional)
Side I/O Port
(USB)
Side I/O Port
(RS-232)
RFID Antenna
(Optional)

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
13
Bottom View (Base)
Bottom View (POS Unit)
Cable Slot
Bottom I/O Ports

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
14
I/O Ports
Bottom I/O Ports
Side I/O Ports
Side I/O Port
(USB)
USB-C 3.2
RJ45
LAN
COM1~3
HDMI
RJ11
(Cash Drawer)
LINE OUT
MIC IN
Main Power
Input
12V OUT
USB-A 3.2
USB-A 2.0

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
15
I/O Ports Descriptions:
I/O Port
Description
Mic In
1 x Mic-in for microphone.
LINE OUT
1 x Line-out for earphone or speaker.
HDMI
1 x HDMI for transmitting data to monitor
COM
3 x COM (RJ45) and 1 x COM (USB)
COM1~COM3: RJ45, RI/5V/12V supported
COM4: USB Type A
USB Ports
Connect devices with USB type A connectors
Bottom: 2 x USB-A 2.0, 1 x USB-A 3.2, 1 x USB-C 3.2
Panel Side: 2 x USB-A 2.0
LAN
1 x RJ45 10/100/1000Mbps Giga Ethernet
CR
1 x RJ11 port, which supports 2 cash drawers with 12V or 24V
12V IN
1 x Standard DIN 4PIN type Main Power Connector
12V OUT
1 x +12VDC jack for customer display or 2nd VGA monitor.

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
16
POS Installation
Unpack Your POS
The contents may vary with different options. If there’s any physical damage or
missing parts, please contact your supplier immediately. Please keep all packing
materials in case you need to ship back the device for service.
Unpacking
The product and accessories are packed in a paperboard carton.And it is wrapped
by foam padding for protection during shipping.

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
17
Install Your POS
1. Place the POS terminal on a proper surface
2. Push/Pass the power cord of the power adapter through the
Base Cable Slot and connect to the power port (Main Power
Input) of the POS unit.
3. Connect the optional peripherals to the POS, e.g. Mouse,
Keyboard, Barcode, etc.
4. Plug one end of the AC power cord to the power adaptor.
5. Plug another end of the AC power cord to the power supply
or wall outlet.
6. Examine the Power Connector and Power Cord and make
sure all cables properly connected to the POS terminal,
Power Adaptor, and Power Source.
7. Turn on the switch of optional peripherals if installed, such
as a Printer Unit, a 2nd Display, and other optional units.
8. Turn on the power switch of the POS terminal.
Note:
Always install the POS terminal and the optional peripherals on a flat, clean and stable
location.
To prevent obstruction on the operator, reserve appropriate space for the POS terminal
and remove unnecessarily objects or items.
Electrical Outlet
Power Cord
Power Adapter
POS Terminal
Base Cable Slot
Pass the Power Cord
through Base Cable Slot

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
18
Appendix
Install the Modular Customer Display (Optional)
Note:
• The Modular Customer Display is an Optional Accessory and is not included in the
standard package. Please contact your local representative for further information.
Securing
Screws x 2
Modular Customer
Display
a. Remove the cover of the connectors
b. Connect the connector of the Modular
Customer Display to the POS Unit (as
indicated below by red mark).
c. Tighten the securing screws of
Modular Customer Display.
Dual
Connectors
The 2nd display connector of POS
Unit contain two parts(upper and
lower half) for 2nd Display and
Customer Display individually:
Upper Half: connector for 2nd Display.
Lower Half: connector for Customer
Display.
Customer Display Connector

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
19
Install the 2nd Display (Optional)
Note:
The 2nd Display is an OptionalAccessory and is not included in the standard package.
Please contact your local representative for further information.
a. Remove the cover of the
connectors
b. Connect the connector of the
2nd Display to the POS Unit (as
indicated below by blue mark).
c. Tighten the securing screws of
the 2nd Display.
Dual
Connectors
Securing
Screws x 2
2nd Display
2nd Display Connector

Copyright © 2022 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks
used herein are the property of their respective owners.
20
Install the MSR & i-Button Module (Optional)
d. Tighten the securing screws
and switch the POS Unit on
a. Switch the POS Unit Off.
b. Install the i-Button Module to
the I/O port.
i-Button Module
Power Switch
c. Install the MSR Module to the
Side I/O port.
MSR Module
Securing Screws x 2
Module