U-Line CUTLEREASE H-10734 User manual

0423 IH-10734PAGE 1 OF 2
1-800-295- 5510
uline.com
CUTLEREASE™TOUCHLESS
UTENSIL DISPENSER
H-10734
LOADING
1. Slide tower partially forward to expose
release trigger at bottom. (See Figure 1)
2. Open top and side doors. Select cutlery pack for
tower type. (See Figure 2)
3. Hold cutlery pack by top and bottom tape tabs.
With cutlery facing down, slide into top opening and
gently guide into tower with tape tabs facing outward.
(See Figure 3)
4. Remove tape by pulling top tab gently downward.
Close top and side doors. (See Figure 4)
Figure 1
Figure 2
Figure 4
Figure 3
Top Tab
Bottom Tab
Release
Trigger

0423 IH-10734PAGE 2 OF 2
LOADING CONTINUED
5. To deploy first piece of cutlery, press and release
trigger quickly. A cutlery handle is now ready for
dispensing. (See Figure 5)
NOTE: Do not hold or press trigger multiple
times. This may cause the cutlery to jam.
6. Slide tower back into dispenser base. Cutlery
dispensing is now ready for use. (See Figure 6)
Figure 5
Figure 6
1
-800-295-551
0
uline.com