U-Line H-1978 User manual

PAGE 1 OF 2 0313 IH-1978
Figure 1 Figure 2 Figure 3
1. Remove the included washers
and bolts from the frames,
using the included Allen
wrench. (See Figure 1)
2. Slide the frame and the frame
cross bar together, aligning the
bolt holes. (See Figure 2)
3. Insert bolts into aligned bolt
holes, placing the washers
between the frame and bolt.
Tighten using included Allen
wrench. (See Figure 3)
ASSEMBLY INSTRUCTIONS
PARTS LIST
Horizontal Hang Bar x 1
Caster x 4
Caster Bumper x 4
Bolt x 4
Nut x 4 Washer x 4
Frame x 2
Vertical Bar x 2
Frame Cross Bar x 1
H-1978
Z-RACK
1-800-295-5510
uline.com
π
Allen Wrench Crescent Wrench
TOOL INCLUDED

PAGE 2 OF 2 0313 IH-1978
Figure 5 Figure 6
Figure 4
ASSEMBLY INSTRUCTIONS CONTINUED
4. Place rubber bumpers on
casters with concave side
toward caster.
5. Align and insert casters with
rubber bumpers. Tighten
bolt on opposite side using
included Crescent wrench.
(See Figure 4)
6. Insert the vertical support bars
into the frame. (See Figure 5)
7. Slide horizontal hang bar on to
top of the vertical support bars
and lock into place.
(See Figure 6)
πCHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA