U-Line H-2295 User manual

PAGE 1 OF 2 0714 IH-2295
H-2295, H-3501
H-3503
BENCH WITHOUT BACK
1-800-295-5510
uline.com
π
TOOLS NEEDED
1/2" Wrench
PARTS
1 2 3
4
5
6
#QTY DESCRIPTION
1 7 1/2" Hex Head Bolts
214 1/2"Washers
3 7 1/2"Nuts
4 1 Bench Seat
5 2 Leg Braces
6 2 Legs

PAGE 2 OF 2 0714 IH-2295
ASSEMBLY
1. Attach the bench seat (A) to a leg (B).
Make sure the leg is on the outside of the bench
seat and the brackets on the leg are facing inward.
(See Figure 1)
2. Loosely attach the leg to the bench seat
using one bolt, two washers and a nut (C).
(See Figure 1)
3. Repeat with the second leg.
NOTE: To protect the bench, place a blanket
underneath the bench seat while assembling.
4. Set the bench upright on its legs. Loosely attach the
leg braces (D) using one bolt, two washers and a
nut. (See Figure 2)
5. Ensure the bench is level, then tighten each bolt in
the order of assembly.
Figure 1
Figure 2
A
B
C
D
π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com