UBI EasyPak 501 User manual

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
1
Edition 3
January 1994
Art. No. 1-960339-02
CONTENTS
Contents 1
Register now 2
Get to know your printer 3
Introduction 4
Check the package contents 4
Connect power cord 5
Connect interface cables:
❏ UBI LabelShop program (serial) 5
❏ Other Windows programs (parallel) 5
Install your UBI LabelShop program 6
Print your first label using UBI LabelShop 7
Install your UBI Windows Printer Driver 8
Use your UBI Windows Printer Driver 9
Load paper: Tear-off function 10
Load thermal ribbon 11

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
2
REGISTER NOW!
Please, fill in your Printer Registration Card and send to
us at the UBI manufacturing plant. We will then keep you
updated on releases of new products, improvements and
software.
Information in this manual is subject to change without prior notice
and does not represent a commitment on the part of UBI Printer AB.
© Copyright UBI Printer AB, 1994. All rights reserved.
Published in Sweden.
EasyCoder, LabelShop and EasyPak are trademarks of United
Barcode Industries (UBI).
Centronics is a trademark of Centronics Data Computer Corp.
Windows and Excel are trademarks of Microsoft Corporation.
PageMaker is a trademark of Aldus Corporation
CorelDraw is a trademark of Corel Systems Corporation.

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
3
Indicator Lamps
Display Window
Print Key
Front Lid
Get to know your printer!
Right-hand Door
Print
Power Ready Error
EasyCoder 501
Tear-Off
Edge
Thermal
Printhead
Paper Supply SpoolTransfer Ribbon Supply
Transfer Ribbon
Take-Up
Guide Ring
Load
Print
Printhead Lever

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
4
CHECKTHEPACKAGECONTENTS
Make sure the following items are included in your
EasyPak box:
❏
UBI EasyCoder 501 printer
❏ UBI LabelShop floppy disk
❏ Windows Printer Driver floppy disk
❏Power cord
❏Serial interface cable
❏Parallel interface cable
❏Thermal paper roll
❏Thermal ribbon roll
❏ UBI EasyPak , Getting Started
❏ UBI EasyCoder 501 User’s Manual
❏ UBI LabelShop User’s Manual
❏ Windows Printer Driver Installation
Instructions
❏Technical description
❏ Quick Reference Printer Guide
❏Printer Registration Card
INTRODUCTION
Congratulations! What you now have in your hands is
a complete package containing everything you need to
print your own bar code labels. UBI EasyPak is devel-
oped with one important idea in mind—simplicity.
For you, this means increased productivity and greater
job satisfaction.

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
5
230V
0
MADE IN SWEDEN
Type
Art. No.
Ser. No.
115/230 V 2.6/1.3 A 50–60 Hz
TA
Voltage Switch Power Switch
Power Cord
Receptacle
Serial Interface Connectors (RS232)
Parallel Interface Connectors
(Centronics)
230V
0
MADE IN SWEDEN
Type
Art. No.
Ser. No.
115/230 V 2.6/1.3 A 50–60 Hz
TA
CONNECTPOWER CORD
❏Turn the printer OFF!
❏Make sure that the power switch on the upper back
of the printer is turned OFF (so that the 0 side of the
switch is pressed down).
❏Connect the power cord into the receptacle on the
back of the printer. Plug the other end of the power
cord into an AC power outlet.
(N.B. Check that the printer is set for correct volt-
age, 115 V or 230 V.)
CONNECTINTERFACECABLES
❏Before connecting an interface cable, please make
sure that bothcomputer and printer are turned
OFF.
❏ UBI LabelShop — use serial interface cable
Connect the serial interface cable to the connector
on the back of the printer and fasten the cable with
the screws attached to the cable connector. Con-
nect the other end of the serial interface cable to
the PC serial interface in the same way.
❏Other Windows programs — use parallel inter-
face cable
Connect the parallel interface cable to the connec-
tor on the back of the printer and secure it with the
clips attached to the cable connector. Connect the
other end of the parallel interface cable to the PC
parallel interface and fasten the cable with the
screws attached to the cable connector.
❏Turn the printer ON!

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
6
INSTALL YOURUBI LabelShop™
PROGRAM
❏Insert the "UBI LabelShop" floppy disk in drive A:
in your computer.
❏Open the "Windows Program Manager". From the
menue File, choose "Run".
❏Write "a:setup" in the Command line box and click
the "OK" button.
❏"UBI LabelShop Installation" dialogue box comes
up on your screen.
❏You may change the file directory by clicking the
"Change Directory" button.
Default is "C:\UBILSHOP".
❏You may now change language by clicking the
"Language" button.
❏Click "Install".
❏Enter your user name and serial number that is
printed on the floppy disk.
❏Click "Continue" to start installation.
❏After the installation is done, "UBI LabelShop"
window is automatically created with a "UBIlShop"
icon. Double click the icon to start LabelShop.
Note! Please fill in your Registration Card.

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
7
PRINTYOUR FIRSTLABEL
USINGUBI LabelShop™
❏Check that the serial interface cable is properly
connected between your PC and your printer.
❏Turn the printer ON.
❏"LABELSHOP" comes up in the printer display.
❏Check that paper and ribbon are properly loaded
and that the printhead is lowered. Press the "Feed"
button for feeding one label and to confirm that all is
OK. (If not, see how to load paper on page 10.)
❏Double click on the "UBIlShop" icon to start the
program.
❏From the menue File, choose "Open". A dialogue
box comes up.
❏Select the pre-designed label layout "example.lay".
The layout will appear on your screen.
❏From the menue File, choose "Print". A new dia-
logue box comes up.
❏Select one or more labels from the label list and
click "Print".
❏The labels will be printed on your UBI EasyCoder!
❏For further usage, please read your UBI LabelShop
manual.

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
8
INSTALL YOURUBI WINDOWS
PRINTERDRIVER
❏Open Microsoft Windows.
❏In the "Main" window of the "Program Manager",
open the "Control Panel" option.
❏In the "Control Panel" window, open the "Printers"
option.
❏In the "Printers" window, click the "Add>>" but-
ton.
❏In the "List of printers", select the "Install Unlisted
or Updated Printer" option and click "Install".
❏Insert your UBI Windows Driver floppy disk in
drive A: and click the "OK" button.
❏In the "List of printers", select "UBI EasyCoder
501 8 dot/mm" printer and click the "OK" button.

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
9
LABELSHOP
5 sec.
4 sec.
3 sec.
2 sec.
1 sec.
Offline
WINDOWS DRIVER
5 sec.
4 sec.
3 sec.
2 sec.
1 sec.
Waiting
WINDOWS DRIVER
Waiting
USEYOUR UBIWINDOWS
PRINTERDRIVER
❏In the "Control Panel" window, double click on
"Printers". Select desired UBI EasyCoder printer
and click on "Set As Default Printer".
❏To set up specific label dimensions etc. click on
"Setup" button. Please refer to UBI Windows Printer
Driver installation for detailed information.
❏Check that the parallel interface cable is properly
connected between your PC and your printer.
❏Turn the printer ON.
❏Within five seconds, press the print button to set
the printer in UBI Windows Printer Driver mode
(default is UBI LabelShop mode).
❏Check that paper and ribbon are properly loaded and
that the printhead is lowered. Press the "Feed"
button for feeding one label and to confirm that all is
OK. (If not, see how to load paper on page 10.)
❏From now on, all printing from Windows programs,
such as Word, Excel, PageMaker, Corel Draw etc.,
will be performed on your connected UBI
EasyCoder printer.
❏To go back to UBI LabelShop mode, turn the printer
first OFF then ON and press the print button within
5 seconds.
You can easily alternate between UBI Windows Driver
mode and UBI LabelShop mode by pressing the print
button within 5 seconds after power ON.

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
10
LOADPAPER
The UBI EasyCoder 501 printer lets you print and feed
out labels or tickets, and you can tear off the paper web
at the tear-off edge.
❏Tear-Off
1Lift the green printhead lever counter-
clockwise.
2Fit a new paper roll on the paper supply spool.
3Thread paper as shown in the picture.
4Adjust the green ring to guide paper.
5Turn the printhead lever clockwise.
6Feed out at least one label. To tear
off paper, pull it downwards.

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
11
LOADTHERMAL RIBBON
To install a new thermal ribbon, proceed as follows:
1Lift the green printhead lever counter-clockwise.
2Put the full-ribbon stock on the transfer ribbon
supply shaft. Pay attention to how the ribbon is
mounted.
3Thread the transparent start portion of the ribbon
below the printhead. Pull out approximately 20 cm
(8") more ribbon, measured from the printhead.
4Lower the green printhead.
5Fit the rewind core onto the transfer ribbon take-up
shaft. Pay attention to how the core is mounted (see
illustration).
6Lift the printhead.
7Manually, or by means of the "Feed" key, rewind
the ribbon until all of the transparent front portion
has passed the printhead.
8Lower the printhead by turning the green lever to
the "Print" position.
9Print a few labels to check that ribbon and paper are
fed regularly.
Load
Print

UBI EasyCoder 201 IIE
UBI EasyPak 501 – Getting Started
12
NOTES: