Ubiquiti UAP-IW-HD User manual

Package content
installation requirements
UAP-IW-HD Quick Start Guide
Torx security screw
UAP-IW-HD
Phillips screws (qty: 2)
cover plate
Torx screws (quantity: 2)Wall screws (qty: 4)
Phillips security screw
back plate
Pre-installed electrical wall box
Phillips and flat head screwdrivers
Category 5 (or higher) UTP cable certified for indoor use
T10 Torx bit (for Torx screw option)

hardware description
UAP-IW-HD Quick Start Guide
back section
System Requirements
UniFi Controller Software v5.7 or later (available at: ui.com/
download/unifi)
IMPORTANT: The UniFi Driver v5.7 is recommended to manage the UAP-IW-
HD, available for download at: ui.com/download/unifi
The 10/100/1000 Ethernet port supports 802.3af PoE input and data. The UAP-IW
HD itself requires 11W.
Web browser: Google Chrome (other browsers may have limited
functionality).
PoE + Data Input
IMPORTANT: The UAP-IW-HD requires a UniFi switch with PoE for power.
Passive PoE adapters are not recommended.
Java Runtime Environment 1.8 (o superior)
Linux, Mac OS X o Microsoft Windows 7/8/10
UniFi Switch with PoE

Panel lateral
Panel inferior
The reset button has two functions for the UAP-IW-HD:
10/100/1000 Ethernet port supports data and PoE gateway (requires
802.3at PoE+ input). The maximum output power of the PoE gateway is 12W.
Reset
Salida PoE + LAN 1
These three 10/100/1000 Ethernet ports support data only. They are used to
connect client devices to the LAN.
Restore Factory Default Settings: Press and hold the Reset button for more
than five seconds.
AND 2 - AND 4
Reset: Press and quickly release the Reset button.
PoE+ 802.3at input needs to use a PoE gateway. Connect this UAP-IW-HD Quick
Start Guide port to a UniFi switch with PoE connected toyour LAN and DHCP server.
Note: To power and connect an 802.3af device to the LAN, you
must use an 802.3at PoE+ input.

security tab
UAP-IW-HD Quick Start Guide
LED
(Optional) Security screw secures cover plate after installation. You have the
option of using the included Torx security screw (shown) or Phillips security
screw.
In addition to the optional security screw, the security tab helps secure the
cover plate after installation. If you need to remove it, use a flat head screwdriver
to depress the security tab while removing the cover plate:
security screw

The back plate has several mounting holes for use with different wall boxes. Here
are some examples with the proper mounting holes highlighted in blue:
UAP-IW-HD Quick Start Guide
back plate

An electrical wall box should be pre-wired with an Ethernet cable from the box to a UniFi switch with
PoE.
1.
EE. UU. o China
Europe
hardware installation
UAP-IW-HD Quick Start Guide

UAP-IW-HD Quick Start Guide
3.
2.

UAP-IW-HD Quick Start Guide
4.
O

UAP-IW-HD Quick Start Guide
5.
Optional

software installation
UAP-IW-HD Quick Start Guide
Download and install the latest version of the UniFi Controller software. Run it and
follow the instructions on the screen. The software and step-by-step User Guide
instructions are available at: ui.com/download/unifi
Once you have installed the software and run the UniFi Setup Wizard, a login
screen for the UniFi Controller management interface will appear. Enter the
administrator name and password you created and click the option to login.
O

Weight
network interface (5) 10/100/1000 Ethernet ports
139,7 x 86,7 x 25,75 mm
(5,5 x 3,41 x 1,01")
210 g (7,41 oz)
PoE 802.3af compatible
PoE+ 802.3at compatible
Dimensions
feeding method
UAP-IW-HD
Reset
Buttons
Ubiquiti also offers a UniFi app, available from the App Store® (iOS) or the Google
Play™ Store (Android). You can use it to make use of basic UniFi access point
features without the need to set up a UniFi controller.
You can manage your wireless network and view network statistics through
the UniFi Controller's management interface. For information on setting up and
using the UniFi Controller software, see the User's Guide.
Mobile app installation
specs
It also allows constant connection of access points for remote controllers
(controllers not on the same Layer 2 network) and easy access to local controllers
and those being monitored on unifi.ui.com
UAP-IW-HD Quick Start Guide

UAP-IW-HD Quick Start Guide
safety instructions
5 GHz
1733 Mbps
Certifications
2. Pay attention to all warnings.
23 dBm
UniFi switch (PoE)
Maximum power consumption with
PoE gateway
11W
DESPITE
5 GHz
antenna gain
802.11 a/b/g/n/ac/ac-wave2
2,4 GHz
Operating temperature -10° C to 60° C (14° F to 140° F)
WARNING: Do not use this product in a location where it may be submerged in water.
5 GHz
48V direct access (sockets: 1, 2+; 3, 6-)
2,4 GHz
wireless security
5 to 95% non-condensing
WARNING: Avoid using this product during a lightning storm. There is
Energy saving
(WPA/WPA2, TKIP/AES)
Maximum transmit power
2 x 2
5 GHz
5 GHz
Power supply
max speed of data
1,8 dBi
4 dBi
operating humidity
Requires 802.3at PoE+ switch.
1. Read, follow and save these instructions.
UAP-IW-HD
1 electrical wall box (not included)
23W*
2,4 GHz
300 Mbps
PoE output
2,4 GHz
3. Only use the devices or accessories indicated by the manufacturer.
4 x 4
Wi-Fi standards
WEP, WPA-PSK, WPA-Enterprise
CE, FCC, IC
2,4 GHz
Compatible
operating frequency
26 dBm
Mounting
*

FCC
ISED Canada
UAP-IW-HD Quick Start Guide
electrical safety information
limited warranty
Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions.
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
ui.com/support/warranty
1. It is mandatory to comply with the current, frequency and voltage requirements indicated on the
manufacturer's label. Connection to a power source other than those specified may result in
malfunction, equipment damage, or fire hazard if limitations are not followed.
1. This device may not cause harmful interference.
The limited warranty requires arbitration to resolve disputes on a case-by-case basis and,
where appropriate, specifying arbitration instead of jury trials or class actions.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide acceptable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
2. This equipment contains no operator-serviceable parts. Only a qualified service technician
should provide services.
remote possibility of an electrical discharge caused by lightning.
2. This device must accept any interference received, including interference that may
The FCC has approved this radio transmitter.
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
1. This device may not cause interference.
CAN ICES-3(A)/NMB-3(A)

Australia and New Zealand
Brazil
IMPORTANT NOTE
CE marked
The device for operation in the 5150-5250 MHz band is intended for indoor use only to reduce
the possibility of harmful interference to co-channel mobile satellite systems.
This equipment complies with radiation exposure limits set forth for an uncontrolled environment.
Note: This equipment is not entitled to protection against harmful interference and
may not cause interference in authorized systems.
Note: This device complies with the maximum transmit power limit per ETSI regulations.
The following shall apply to products operating in the 5 GHz frequency range:
2. This device must accept any interference, including interference that may cause undesired
operation of the device UAP-IW-HD Quick Start Guide .
IT LV LT LU MT NL PL PT RO SE SI SK UK
ISED Canada has approved this radio transmitter.
Members with broadband fixed wireless access are highlighted in blue
Warning: This equipment is compliant with Class A of CISPR 32. In a residential
environment, this equipment may cause radio interference.
This equipment should be installed and used with a minimum distance of 20 cm between the radiator
and your body.
AT BE BG CY CZ DE DK EE EL ES FI FR HR HU
This transmitter must not be co-located or used in conjunction with any other antenna or transmitter.
IE
The CE marking of this product indicates that the product complies with all applicable
directives.
list of countries
Radiation Exposure Statement:

online resources
UAP-IW-HD Quick Start Guide
© 2022 Ubiquiti Inc. All rights reserved.
Note: This device is only suitable for indoor use when operating in the frequency
range of 5150 - 5350 MHz in all member states.
Note: Operation in the 5.8 GHz frequency band is prohibited in member states
with fixed broadband wireless access. The rest of the listed countries can use the
5.8 GHz frequency band.
Declaration of conformity
WEEE Compliance Statement