Uovision GLORY LTE User manual

GLORY LTE Scouting Camera
Instruction Manual
(Model No. L4-E)

Content
1 Camera Overview ....................................................................... 1
2 Quick start guide ........................................................................ 2
2.1 Installing the batteries .................................................... 2
2.2 Installing the SD card ....................................................... 2
2.3 Insert the SIM card ............................................................ 3
2.4 Downloading the Mobile App ....................................... 3
2.5 Power switch and buttons ............................................. 4
2.6 Setting map .......................................................................... 6
2.7 Send a test photo ............................................................ 12
3 Connecting CAM to cloud server ...................................... 13
3.1 Connecting CAM to cloud server .............................. 13
3.2 Send a photo to cloud server ..................................... 16
3.3 Setting CAM with Web Portal or APP ..................... 17
4 Auxiliary power ....................................................................... 19
5 Mount tips ................................................................................... 19
AppendixⅠ: Technical Specifications ................................ 22
Appendix Ⅱ: Parts List ............................................................. 24

What you will need to set this camera up:
-Internet Access to
https://www.linckeazi.com
-12 AA Batteries
-SD Card
-SIM Card

Page 1
1 Camera Overview
1: Black vision IR flash 2: Lens
3: Light sensor 4: Power switch
5: PIR sensor 6: Key board
7: HD TFT screen 8: LTE main antenna
Fig 1 Operation Interface

Page 2
2 Quick start guide
2.1 Installing the batteries
This camera can function on 12AA batteries.
Pay attention to the (+) or (-) molded into each sleeve
to determine if you insert the positive or negative end
into the sleeve first. Negative battery terminal always
contacts the spring.
Note:
·Do not mix different types of batteries
·Do not mix the old and new batteries
·Recommend high-density and high-performance
batteries, such as Alkaline or Lithium batteries.
·Remove batteries when not in use to prevent
leakage!
2.2 Installing the SD card
To be able to power up the camera you will need to
install a SD card in the slot in the bottom of the camera.
You can use any SD card size up to 64GB. You must have
the SD card in the camera to be able to turn the camera
on and set it up.

Page 3
2.3 Insert the SIM card
This product support B1/B3/B5/B7/B8/B20@FDD LTE
B38/B40/B41@TDD LTE B1/B5/B8@WCDMA B3/B8@GSM.
Be sure the PIN code of the SIM card is disabled, and there
is enough money in the SIM card.
2.4 Downloading the Mobile App
Search“Linckeazi”in your Google Play Store or Apple
Store
Accessing the Web Portal:
Open your web browser to:
https://www.linckeazi.com
You also can scan the QR code and install the APK file
to your smart phone.

Page 4
Android APP IOS APP
2.5 Power switch and buttons
Slide the power switch to SETUP position, then you can
start setting the CAM as your favor.
Fig2 Power switch
Power Switch:
OFF: Power off (Please remove batteries when not in
use);
SETUP: Setting the camera;
ON: Working mode (the screen will power off).

Page 5
Buttons:
MENU: Enter menu
▲▼◄►: Navigation button.
OK: Confirm operation /Playback photos or video clips.
►: To manually take photo or video. (Click again to
stop the video.).

Page 6
2.6 Setting map
Fig3 Main Screen
Settings:

Page 7
Send Mode:
Off: Disable the transmission function.
Instant: Enable the instant transmission. Max Number
of Instant means the number of photos that is allowed
to send out per day. If you want to control your data
flow, set the maximum number. The number 00 means
infinity.
Remote Control: You can remote control your camera
via mobile phone or web-portal. Choose Real Time, the

Page 8
wireless module is keeping work so the power
consumption is huge. Delay 24H means the wireless
module will wake up at least one time in 24 hours.

Page 9
Photo Burst：It’s the taken number of pictures when a
triggering. If photo burst is 3, it means the camera will
take 3 pictures after one triggering. You also can
choose which one of the pictures will be sent via Send
Option.
Shutter Speed：Normal is suitable for most application
scenarios. Fast can be used to reduce motion blur.

Page 10
PIR Interval：It means how often the PIR sensor can be
allowed to work. This prevents the card from filling up
with too many redundant images.
Time Lapse：When choose time lapse, camera takes
photos or videos even when it is not triggered by a
nearby live animal. It’s useful for constant monitoring
of an area.
Work Time：The camera can work at a preset time and
preset days. In the rest of the time the camera is not
work. Work hour: 00:00-00:00 means 24 hours. If the
settings is cross the day, for example: Start: 20:00 Stop:
10:00 means 00:00-10:00 am and 20:00-24:00 of the
chosen day.

Page 11
Password：Make sure you write down your password
or save it to your mobile phone so you can access your
camera if you ever forget your password.

Page 12
2.7 Send a test photo
1) Switch camera to Setup mode, press ► button to
take a picture, then press OK button to check this
picture;
2) Press the MENU button, choose send. You will see
sending progress shows on the LCD screen.
Fig 4 Fig 5
Once you see send successful, check your email account
or phone see if you receive the correct photo.
If the sending is failure, choose Diagnose to generate a
Log file and the FAQ will help you with your Log file.

Page 13
Fig 6 Fig 7
3 Connecting CAM to cloud server
3.1 Connecting CAM to cloud server
Open your browser and access the address:
https://www.linckeazi.com/index.html
Click ‘Sign up’ on the page to pop up the registration
page.
The registered users of the platform need to fill in the
user name, email address, email verification code,
setup password, verification password (re-enter the
setup password), and then agree to the terms and
agreements to complete the platform registration.
If you have registered for the cloud platform, enter
your account and password to log in directly.

Page 14
Fig 8 Fig 9
Click ‘Add Device’, a form will pop out requesting
basic information for your CAM.

Page 15
Fig 10 Fig 11
Name your CAM, and add location description if
necessary, the SN and IMEI can be found labeled inside
CAM:
SN labeled at the side of SIM slit

Page 16
IMEI labeled at the front panel
3.2 Send a photo to cloud server
Choose a picture, press MENU, Select ‘send’, the
process of sending photo will present at screen, and
within minutes your cloud account will receive your
photos.
If you have the E-mail transfer function enabled on
your Linckeazi cloud platform, the cloud platform will
also send a photo or video copy to your E-mail address.
Fig 12

Page 17
If the above test has accomplished, then you can slide
power switch to ‘on’ and start using it take photo or
video automatically.
3.3 Setting CAM with Web Portal or APP
The CAM can be set up conveniently with cloud server
and APP as well.
Fig 13
As to APP, Please search “Linckeazi”