Uovision UM595-HD-3GE User manual

(For UM595-HD-3GE（Web Portal）Model)
Thanks for your purchase of
UOV Cloud Platform camera. This manual will
guide you through all the features of this
device
So that you could get optimal use of your
Uovision product.
We strive on offering all customers a
positive, user friendly experience and
leaving customers a lasting impression
ww.uovision.com
086-755-8652-8612
[e-mail]

Content
1 Camera Overview ............................................................1
2 Quick start guide: ..........................................................3
2.1 Installing your SIM card and SD card ...........................3
2.2 Set power................................................................4
2.3 Camera settings .......................................................5
2.4 Setting map.............................................................6
3 Test shot.......................................................................8
4 Connecting CAM to cloud server .......................................9
4.1 Send a photo to cloud server .................................... 11
5 Setting CAM with cloud server or APP or SMS ................... 11
6 Mount tips................................................................... 13
Appendix Ⅰ: Technical Specifications .................................... 14
Appendix Ⅱ: Parts List ....................................................... 15

Page 1
1 Camera Overview
Fig 1 Front View

Page 2
Fig 2 :Operation Interface
Fig 3 : Bottom View

Page 3
2Quick start guide:
2.1 Installing your SIM card and SD card
Fig 4
Notice
·This product use 3G /GSM cellular network
·The maximum support SD memory is 32G

Page 4
2.2 Set power
There’re two ways to offer power: 12 size AA batteries with 1.5v, or
plug power port.
Fig 5
Notice
· Confirm that the power switch is at ‘OFF’ position
· Insert battery with right polar, as fig6 show
· Recommend high-density and high-performance
batteries for longer usage

Page 5
2.3 Camera settings
Slide the switch button to ‘setup’ position, then you can start setting
the CAM as your favor.
Power Switch button: OFF: power off; SETUP: setting the CAM;
ON: working mode (the screen will power off).
Press the MENU button. You will see the screen shown in Fig.6,
Fig 4
use▲▼◄► buttons for navigation, OK button to confirm operation.
Button for playback and preview.DEL button for deletion.
for manually take photo or video. (Click again to stop the video.).

Page 6
2.4 Setting map
Fig 7
Fig 8

Page 7
Fig 9
Fig 10

Page 8
3Test shot
If former steps are all right, slide power switch to ‘Setup’, after few
minutes of network searching, the screen of CAM will present as below.
Fig 11
With enough battery power, good signal strength and enough SD card
memory, then you can start a test shot:
1) Press to take a photo manually (assume it’s camera mode,
otherwise you’re recording a video).
2) Press to browse the photo you take.
3) Press MENU button. You will see the following screen.