URBAN OUTFITTERS IMARI User manual

Assembly Instructions
Page 1 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
IMARI COAT RACK
TOOLS REQUIRED BUT NOT INCLUDED:
(A) Coat Rack Rail
4x
PARTS INCLUDED
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits at on uneven oors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
(B) Bottom Base
1x
(C) Metal Hardware
1x
(D) Bolts M6 x 20mm
4x
(E) Long Bolts M6 x 38mm
4x
(F) Hex Key
1x

Assembly Instructions
Page 2 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
IMARI COAT RACK
STEP 1. Align Coat Rack Rail (A) with Metal Base (B). Insert Long Bolts (E), Loosley tighten. Repeat for all
the Coat Rack Rails (A) . Once all Long Bolts (E) are inserted you may completely tighten with supplied
Hex Key (F). Gently stand the Coat Rack upright.
STEP 2. Align the Metal Hardware (C) with assembled Coat Rack as shown below. Insert Bolts (D).
Tighten with supplied Hex Key (F).