URBAN OUTFITTERS ARMAND User manual

Assembly Instructions
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
The assembly of this item requires x 2 people.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 1 of 5
ARMAND BED
HARDWARE LIST
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips Head Screw Driver
PARTS INCLUDED
(5) Screw
M4 x 25mm
Quantity: 28pcs
(7) Allen key
Quantity: 1pcs
(A) Headboard
Quantity: 1pc
(1) Bolt
M8 x 20mm
Quantity: 8pcs
(B) Foot-board
Quantity: 1pc (C) Side rails Quantity: 2pcs (D) Middle rail Quantity: 1pc
(F) Slats
Quantity: 14pcs
(4) Bolt
M8 x 50mm
Quantity: 3pcs
(G) Upper post slats
Quantity: 1pc (H) Headboard panel Quantity: 1pc
(E) Support legs
Quantity: 3pcs
(3) Bolt
M8 x 30mm
Quantity: 6pcs
(2) Flat Washers
M8
Quantity: 12pcs
(6) Screw
M4 x 40mm
Quantity: 2pcs

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 5
STEP 1.
STEP 2.
7
E
D 4
C
C
With help, align side-rails (C) to the holes in headboard (A) and foot-board (B) and Insert bolts (1),
flat washers (2). Tighten with Allen key (7).
Align legs (E) with the corresponding holes in middle rail (D). Insert bolts (4). Tighten with the Allen key (7).
Turn the adjustable feet so the middle rail assembly sits flat on the ground.
B
E
D
ARMAND BED
Note that this hole must
be above the headboard.
A
7
1
2

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 3 of 5
STEP 3.
F
Align the Middle rail as shown. Insert screws (6) and tighten using a screwdriver (not provided).
Do not over-tighten.
ARMAND BED
STEP 4. Lay slats (F) and upper post slat (G) into the assembled frame as shown.
G
6

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 4 of 5
ARMAND BED
STEP 6. Lay headboard panel (H) into the groove in upper post slat (G). Insert bolts (3), flat washers (2) from behind
the headboard and tighten with the supplied Allen key (7) as shown below.
A
H
G
STEP 5. Insert bolts (3) into either side of upper post slat (G). Tighten with Allen key (7). Insert screws (5) into slats (F).
Tighten the screws using a screwdriver (not provided). Do not over-tighten.
A
7
3 2
5
7
3
G
F
F

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 5 of 5
ARMAND BED
155mm
[6 1/8"]
775mm [30 1/2"]
FINISH
2362mm [93"]
1715mm [67 1/2"]
1467mm [57 3/4"]
270mm
[10 5/8"]