URBAN OUTFITTERS EBBA 81291577 User manual

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1
MIRROR: EBBA MIRROR
Assembly Instructions
(A) Anchor
[12x12x42mm] X4
(B) Screw
[4x4x38mm] X4
(C) Cleat X1 (D) Mirror X1
30x68x2.7”
68"
30"
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips head screwdriver, pencil, level
WARNINGS:
Do not throw away packing materials and carton until after assembly
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2
MIRROR: EBBA MIRROR
Assembly Instructions
STEP 1
Place the cleat on the wall in its desired location. Ensure the cleat is level and mark the location of the screw
holes. If attaching to drywall, insert the anchors (A) into the wall at the marked hole locations, then screws (B)
through the cleat into anchors (A) using a phillips head screwdriver. If screwing into studs, no anchor is required.
STEP 2
With help, hang the mirror (D) onto Cleat (C) to complete assembly.